Gilson Pipetman P100 10-100 uL Pipette Single Channel 1-Kanal Pipette

Boekel Scientific 1494 Concentric Ring Bath, 8 place, 115VThe Boekel Scientific 1494 ConcentricRing  (more)Bath, 8 place with adjustable water bath openings. Heavy duty 3" legspermanently attached to the body. Removable concentric rings to suit mostlaboratory containers. Analog temperature control with high and low powermodes. Two power settings, one for rapid heat up and one for reduced power consumption No wiring or assembly required Fabricated from stainless steel to ensure a long service life Supplied with water level regulator and ring sets Comes complete and ready to use. Add water and plug in. 2 year warranty Applications Solvent extraction Melting solids Evaporating liquids Analysis of total dissolved solids KD concentration Drying of wastewater sludge Chemical reactions like saponification QC departments Melting bases in crucibles Solids testingINCLUDED: The Boekel Scientific 1494 Concentric Ring Bath, 8 place, 115V includes: - Ring Sets - Water Level Regulator - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 2 x microplate swing out rotor for Z287-A The Hermle 2 x microplate swing out rotor for Z287- (more)A is an essential piece of equipment for laboratories conducting experiments with microplates. This rotor can spin microplates at a maximum speed of 3,800 rpm, generating an RCF-value of 1,453 xg. With a maximum radius of 9.0 cm, it provides ample centrifugal force to ensure efficient separation of samples in a relatively short amount of time. The rotor is equipped with an efficient acceleration and deceleration system, with acceleration taking 27 seconds and deceleration taking 29 seconds. This system ensures that samples are not damaged during the spinning process and that they are collected safely at the end of the experiment. The maximum loading weight for the rotor is 100g, with a loading height of 20mm, making it suitable for use with microplates of different sizes. Overall, the Hermle 2 x microplate swing out rotor for Z287-A is a valuable addition to any laboratory conducting experiments with microplates. It is an efficient and reliable piece of equipment, capable of generating enough centrifugal force to separate samples quickly and effectively. Its efficient acceleration and deceleration system, coupled with a high maximum speed and RCF-value, make it a top choice for laboratories looking to maximize the efficiency of their experiments. INCLUDED: The Hermle 2 x microplate swing out rotor for Z287-A includes: - Operator's Manual - Manufacturer's Warranty

Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Downflow velocity: 0.35 m/s Sound level: < 58 dBA Light intensity: > 800 lux Pre-filter (EN 779): G4 (more) Horizontal HEPA filter (EN 1822): H14 Dimensions (WxDxH): 1900 x 740 x 1360 mm Interior dimensions (WxDxH): 1800 x 600 x 685 mm Height with support frame: 2240 mm Aperture height (work mode/maximum): 165/375 mm Weight: 230 kg

Grant C2G immersion Cooler This was removed from a university lab where it was surplus to requiremen (more)ts. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition.

Benchmark MyTemp 65HC Digital Cooling Incubator The myTemp 65HC Incubator is designed to provide acc (more)urate and uniform temperature control from 0 to 60C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc. With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.. With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32in/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH). INCLUDED: The Benchmark MyTemp 65HC Digital Cooling Incubator includes: - Two Adjustable Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA DB 6.2 Individual PCR Tubes Dry Block (0.2 ml tubes)

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 C model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

The Cole Parmer type Masterflex L/S hose pump is ideal for pumping corrosive, abrasive and viscous l (more)iquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industries. This hose pump can be used in combination with the L/S 13, L/S 14, L/S 16, L/S 25, L/S 17 and L/S 18 hoses. Speed: 10 – 600 rpm Pump head type: 7518-00 Hose range: L/S 13: 0.06 – 36 ml/min L/S 14: 0.21 – 130 ml/min L/S 16: 0.80 – 480 ml/min L/S 25: 1.7 -1000 ml/min L/S 17: 2.8 – 1700 ml/min L/S 18: 3.8 – 2300 ml/min

ASSIST offers unparalleled pipetting ergonomics. By attaching a VIAFLO electronic pipette to ASSIST, (more) the pipette’s protocols can be performed automatically. It reduces manual pipetting to the minimum, relieving lab personnel from repetitive motions that may cause repetitive stress injuries. Manual pipetting requires practice to achieve reproducible pipetting results. Typical parameters influencing the performance are tip immersion depth and pipetting angle. The automated pipetting capability of ASSIST ensures these parameters are always the same, resulting in an increased reproducibility. Channels: 8-, 12-, and 16- multichannel VIAFLO pipettes Volume: 0.5 µL to 1250 µL Applications: Serial dilutions, Plate filling, Reagent additions, Liquid handling, Automated multichannel pipetting Capacity: 6-well to 384-well plates Type: Air displacement Dimensions (WxDxH): 340 x 360 x 400 mm Weight: 10 kg