Leica DMRXA2 DM RXA2 Polarization Phasecontrast Microscope Motorized C D1 Prisms

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leica Leitz DMRB Trinocular Fluorescence Microscope Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and working order; however, one noticeable flaw is the missing paint on the top of the unit. This does not affect its functionality. This microscope was tested with an in-house objective. (not included in sale) Features the following: 1 x Leica Leitz DMRB Trinocular Fluorescence Microscope body.Type 301-371.010.Fitted with the following filter cubes:- I3 513808 - For Blue Excitation. - B/G/R 513836 - For DAPF/FITC/TEXAS RED Excitation. - TX 513802 - For FITC Excitation. - A 513804 - For UV Excitation. 1 x Leica 12volt 100watt Halogen lamp.Type 307-155.001. 1 x Leica 501049 Top swing condenser fitted with a Leica 501000 0.90 S1 Lens. 1 x Leica mechanical stage with specimen holder. 2 x Leica L Plan 10x 25 eyepieces. 1 x QImaging Firewire Camera.01-RET-2000R-F-CLR-12-CCooled Colour 12 Bit.

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System This system was removed from a universit (more)y lab where it was surplus to requirements. The microscope is in working order, but we have not tested the laser due to safety restrictions at our site. There are no objectives fitted. Items included are: -Zeiss LSM Control S/N- 000260-Hal 100 Lamp -Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07-Zeiss HBO 100W-Zeiss HBO 100W/2-Zeiss Lasermodul UV-Fujitsu Siemans mouse-Relevant manuals and guides-Connection cables-Comms PCi Cards & Dongle (non USB)

This Olympus BX51 WIF Fluorescence Microscope System was removed from a university lab where it was  (more)surplus to requirements. The System unfortunately is largely untested as the lab was unable to part with the PC and software. They implied that it was in working order prior to having the PC removed as it was just surplus to requirements, but there are some parts missing. Overall it is in good cosmetic condition but has general marks from use. Details; 1 x Olympus MicroscopeModel - BX51WIF 2 x Olympus Eye pieces - WH15X/14 2 x Objectives:-Olympus LUMPlanFI/IR 40x/0.80 W ∞/0Olympus Plan N 4x/0.10 ∞/-/FN22 Olympus LampModel U-LH100IRSN - 6F24822 There is no power supply for the lamp, we used one from another item (not included) to test the light which was working, tested with one of our slides and was able to focus. Q Imaging optiMOS sCMOS cameraCooled Mono 16 BitSN - Q41501Lens - Olympus U-CMAD3/Olympus U-TV1X-2Filter - HQ535/50 M 203616There is no power supply cable for the camera. Newport RG Breadboard Optics TableModel - VH3036W-OPTDimensions - D76 W90 H80cm Faraday Cage Dimensions - D78 W88 H90cmThe cage is in reasonable condition but has a few holes. Table & Cage combined dimensions - D77 W90 H170cm Scientifica Stage/PlatformDimensions - D34.5 W60.5 H20.5cm Power supply for Patch Clamp Micromanipulation System:-Burleigh PCS-PS60Powers on 2 x Burleigh PCS 5000 Series ControllersSN - 0011431 & 0011420 2 x Burleigh PCS 5000 Series MicromanipulatorsBurleigh TS - 5000 - 150 Other parts/accessories include:-Unknown Part SN - 1270Prior partHi-lo Nitrogen 10 Bar gas RegulatorVarious small bits including crocodile clips and tubing

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature control: continuously adjustable from room temperature to 300°C Speed: continuously adju (more)stable from 80 – 1600 rpm Stirring amount: 10 L Dimensions (WxDxH): 150 x 150 x 100 mm Diameter of the heating plate: approx. 130 mm Weight: 2.5 kg

Capacity: 34 L Daily evaporation: 0.17 L/day Dynamic endurance: 125 days Neck diameter: 91 mm Canist (more)ers: 6 Vial Capacity: 684 Weight (empty/full): 16.1/43.5 kg

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

The new RMC.10000.5Y robotic mass comparator guarantees the utmost repeatability within 1 kg - 10 kg (more) range with the readability of 0,01 mg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 10000.5Y mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The new RMC 10000.5Y mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 10 positions. The RMC 10000.5Y enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 10000.5Y mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Ejectable mass standards magazine For the user's convenience, the magazine slides out of the robot's footprint at the time of arming and allows weights to be applied very easily, then positions itself automatically when retracted. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.