Laboratory equipment

Pipette tips 1000 μL GILSON D1000ST Diamond, sterile, rack of 96 pieces. You can also  easily order  (more)PIPETTES and/or PIPE HOLDERS . Volume: 100 – 1000 µL Rack of 96 pieces Color code: Blue Length: 66 mm High quality PP Sterile

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (± 3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg

The Nucleofector technology is a major improvement of the well known electroporation technology. The (more) Nucleofector technology involves a combination of optimized electrical parameters and specific Nucleofector solutions for different cell types. This combination permits the crucials step: delivery of the DNA of interest straight into the nucleus. As the DNA quickly reaches the nucleus, expression can begin without delay. The nucleofected cells are thus ready for analysis after a short incubation time of only 2 – 8 hours. DNA quality: 1 – 5 µg plasmid concentration per nuclefection sample (100 µl), plasmid concentration can be increased up to 10 µg per sample. This may lead to higher gene transfer efficiencies, but at the same time may increase mortality of the cells. Cell density: 2 x 105 – 1 x 107 cells per nuclefection sample for suspensions cells 2 x 105 – 2 x 106 cells per sample for adherent cells Cell densities of < 2 x 105 cells per smaple are not advisable beacause the gene transfer efficiency may decrease and mortality may increase. Dimensions (WxDxH): 300 x 230 x x110 mm Weight: 2.5 kg

Return Linear Stainer Model RLS 1800

Dimensions (WxHxD): 600 x 650 x 500 mm

Epsilon 3XLE is a benchtop energy dispersive X-ray fluorescence (EDXRF) spectrometer that is used fo (more)r elemental analysis from carbon (C) to americium (Am) in areas from R&D through to process control. Easy to operate, reliable and highly flexible, it is ideally suited to a broad range of industries and applications. The instrument is powered by the latest advances in excitation and detection technology, delivering excellent analytical performance. The SDDUltra silicon drift detector fitted in Epsilon 3XLE enables ultra light element analysis of even carbon, nitrogen and oxygen. Excluding software

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

Syringe Size: From 10 µl to 50/60 ml Flow Rate Range (Min/Max): 0.0014 µl/hr with 0.5 µl syringe to  (more)26.55 ml/min with 50/60 ml syringe Maximum Force: 8 kg Maximum Pressure: 8 p.s.i. with 50/60 cc syringe; 100 p.s.i. with 1 ml syringe Step Rate (Min/Max): 1 pulse in 27.6 sec / 200 steps/sec Pusher Advance/Step: 0.8 µm pusher advance per motor step Pusher Travel Rate (Min/Max): 0.7 µm/min to 15 mm/min Dimensions (HxWxD): 114 x 229 x 114 mm Weight: 2.1 kg

System consisting of: Dionex Ultimate SR-3000 Solvent Rack Dionex Ultimate LPG-3400MB Pump Dionex Ul (more)timate TCC-3000SD Column Compartment Dionex Ultimate MWD-3000 Diode Array Detector Software not included

Never used, new in Box Stuart SM4 Mini Magnetic Stirrer With fitting for retort rod Compact and ligh (more)tweight With fitting for retort rod Speed range: 80 to 1300 rpm Max capacity : 1 L Overall dimensions (wxdxh) : 90 x 160 x 90 mm Net weight: 1kg 230 V | 3,15 A | 50 Hz | 50 W Never used, new in Box

Including testing report (see example).

To be used with fermentation vessel. 230V/110W

Alpha unit block assembly for DNA Engine systems. Capacity: 96 x 0.2 ml tubes, one 96-well plate.

Alpha unit block assembly for DNA Engine systems. Capacity: 96 x 0.2 ml tubes, one 96-well plate.

Alpha unit block assembly for DNA Engine systems. Capacity: 96 x 0.2 ml tubes, one 96-well plate.

Maximum speed: 13000 rpm Capacity: 6 x 50 mL Tube dimensions (⌀xL): 29 x 104 mm Maximum sample densi (more)ty: 1.2 g/mL Suitable for the following centrifuge types: Sorvall RC-6 Plus series Sorvall Evolution RC series Sorvall RC-5 plus series

For use with: KingFisher Apex Plate type: 96 KF, 96 DW Volume processing: 96 KF plate 50 to 150 μL,  (more)96 DW plate 50 to 1000 μL Format: 96 Particle size: >1 μm

With Brady’s LABXPERT Laboratory Labelling System, Lab Technicians have a powerful yet affordable to (more)ol at their fingertips! Produce legible, professional looking labels for lab samples, while drastically reducing the time it actually takes to label.

Capacity: 5.5 l/min Final vacuum: 160 mbar Operating pressure: 2.4 bar Weight: 1.9kg

Temperature range: -9°C to -30°C Maximum fluctuation: 4.2°C Maximum gradient: 6.8°C Defrost system:  (more)Manual defrost system Cooling system: Static Capacity: 284 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1587 x 420 x 400 mm Weight: 86 kg

Temperature range: 0°C to ambient Temperature can be set individually per compartment Dimensions (Hx (more)WxD): 2000 x 765 x 855 mm Internal dimensions compartments (HxBxD): 600 x 530 x 630 mm

Temperature range: 2°C to 12°C Content: 600 ltr Dimensions (WxDxH): 815 x 755 x 2160 mm Weight: 130  (more)kg

F1 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device&#39;s high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal&#39;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition, with minor marks from use. The sample plate is not included. Further testing is not possible without the necessary PC and Software.

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 Oxygen Probe OD Accuracy: ±0.5% OD Concentrati (more)on: 0.00 - 20.00 / 0 - 90 mg/L Dissolved Oxygen - Saturation: 0.0 - 200.0 / 0 - 600 % (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature Range: 0.0...+50.0 °C Temperature Accuracy: ±0.1 °C Power Supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode / 5000 in automatic mode In good condition