Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

Temperature range: Ambient +5ºC to 70ºC Temperature variation: ±0.2ºC Temperature setability: 1ºC Te (more)mperature deviation (spatial): ±1ºC Heating up time to 37ºC: 27 min Fan speed control: 4 Max load per shelf: 20 kg Maximum load total: 50 kg Capacity: 23 L Internal dimensions (WxDxH): 325 x 260 x 270 mm Dimensions (WxDxH): 515 x 455 x 490 mm Weight: 27 kg

This Kendro HERAcell 240 CO2 Incubator was removed from a university lab where it was surplus to req (more)uirements. The unit has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks from use. Internal dimensions - D56.5 W60 H68cm6 Doors with 6 Shelves - 50 x 26cm

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

Faithful HWS Series constant temperature and humidity incubators. Volume: 70 L (HWS-70B), 150 L (HW (more)S-150B) and 250 L (HWS-250B). Forced ventilation. Temperature range: with humidity 10 to 65 ∫ C; humidity 0 to 65ºC. Resolution 0.1 ºC. Stability: high temperature ± 0.5 ºC; low-temperature ± 1ºC. Uniformity ± 1ºC. Humidifier ultrasonic manual. Range humidity 45% - 95%. Stability humidity ± 5% RH. Stainless steel. Antiescarcha. Control automatic humidity/temperature. Timer 0-99,9 h/cycle. Control over temperature. Automatic recovery after cutting. Interior light. Not CFC. Optional: sterilization by UV light, printer, RS485, alarm, SMS, wireless, USB, data storage, touch screen. The price shown is for the model 70 L (HWS-70B). For other models, use the drop-down.

Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V is a high-capacity, energy-efficient incubator designed for precision temperature control in demanding laboratory environments. With a spacious 384-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it offers flexibility for a wide range of incubation applications. The Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. Enhanced control is provided by the ControlCOCKPIT with TwinDISPLAY, which includes a multifunctional PID-microprocessor controller with dual high-definition TFT-color displays. For precise timing, the SetpointWAIT function ensures that the process only begins once the set temperature is achieved. This incubator prioritizes safety and durability with an AutoSAFETY system, which includes over- and undertemperature monitors and visual and acoustic alarms. Constructed with a stainless steel interior and a textured stainless steel exterior, it is resistant to corrosion and easy to clean. Supporting up to 14 shelves and a maximum chamber load of 440 lbs, the IPP410ecoplus provides ample space for various sample sizes and types. Additional features, such as three freely selectable calibration points, an autodiagnostic system, and AtmoCONTROL software for advanced programmability, make it an indispensable tool for labs focused on efficiency, reliability, and sustainability. INCLUDED: The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

5 Level Shelf Ht 1750mm x P400mm CODIGEL Shelving Lot composed of: An in-line shelf: 3x1199mm on 5 l (more)evels - L = 3537mm (CODIGEL reference: EA-0163) + A corner shelf: 1x1058mm on 4 levels - L = 1058mm (CODIGEL reference: EA-0276) Very solid, durable and hygienic shelving with 15 micron anodized aluminum structure and high density polypropylene shelves They withstand temperatures from -30°C to +75°C, as well as distributed loads of 100kg/m or 120kg per shelf Adjustable feet New equipment in its original packaging

Leica DMIL Inverted Microscope Type 090-135.001 with 4 x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Included are; 2 x Eyepieces:Leica 10X/18 (527000)Leica 10X/18 M (527001) 4 x ObjectivesLeica ∞/1.1 HI PLAN I 40x/0.50 PH 2 (506273)Leica ∞/0-2 HI PLAN I 20x/0.30 PH 1 (506272)Leica ∞/-/ HI PLAN I 10x/0.22 PH 1 (506271)Leica ∞/- HI PLAN 4x/0.10 (506226) Stage - 11521248BZ: 00

OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 p (more)ositions, with a single electrical connection and independent operation of each place. Speed range from 200 to 1200 rpm. Temperature range from 30 to 400 ºC. Maximum capacity per square 2L. Plate dimensions of 100 * 100 mm for each square. OVAN MultiMix Heat MMH50 magnetic digital stirrer. Heated multi-shaker on a single platform with 5 positions, with a single electrical connection and operation independently of each position. Adjustable speed and temperature, controlled by microprocessor. High precision with integrated internal Pt100 probe. LED display. Keyboard with membrane buttons, sensitive to the touch. The selected parameters are kept in the memory of the equipment even when it is turned off.

F2 Mass Standard - monoblock weights without adjustment chamber. Nominal value - 1 g.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz