Laboratory equipment

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Circulation chiller DLK 402 FRYKA Product features: - Electronic temperature control with LED displa (more)y - Float switch for monitoring the coolant level - Level indicator on the front of the appliance - Alarms - Cooling unit: silent, completely hermetically sealed, air cooled, low maintenance - Several hose fittings are included - Fill neck and 3/4 'vent valve on the top of the appliance - Case made of rigid polyurethane foam - Heat exchanger in non-ferrous metal version - Alternative version DLK 402 DP: with double pump and flow rate increased to 5l / min (8mm hose), 6l / min (10mm hose) and flow pressure at 0.3 bar Technical features: Operation from -10°C to +40°C Control accuracy +/- 1 K Cooling capacity in watts at +30°C, 380W; at +10°C, 270W Circulation pump: Flow rate 4l / min; Flow pressure 0.15 bar External dimensions [LxWxH]: 26 x 37 x 40.5 cm Weight: 18kg Ambient temperature from +12°C to +30°C Electric connection: 230V / 50Hz Max current: 1,5A Coolant tank: 4l

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ALS Automated Lab Solution GmbH Cell Collector robot with accompanying Thermo Scientific Herasafe KS (more) 12 bio safety cabinet

Capacity: 384 well microplates Block material: Aluminium Max heating rate: 4.0°C/sec Avg haeting rat (more)e: 3.8°C/sec Max/min gradient: 24°C/0.1°C Gradient temperature range: 20°C to 99°C Temperature uniformity (15 sec after clock starts): ±0.15°C at 55°C Temperature range: 3°C to 99°C Control accuracy: ±0.1°C Heated lid temperature range: 30°C to 110°C Suitable for the Biometra TAdvanced Thermocycler

Dimensions (WxDxH): 1200 x 350 x 600 mm

Dimensions (HxWxD): 2025 x 800 x 620 mm Internal dimensions (HxWxD): 1900 x 760 x 565 mm

The Alifax Test 1 is a fully automated analyzer for the determination of the ESR. It can be loaded d (more)irectly from original blood counter racks. It also includes a new automated washing system. The Test 1 capillary photometry technology overcomes the majority of the variables and limitations of the sedimentation method. It does not use dilution but EDTA tubes with high reproducibility.

System contains: Solvent tray Vacuum degasser Binary pump Autosampler Thermostatted colomn compartme (more)nt Variable wavelength detector Vacuum degasser: The Agilent 1100 HPLC Degasser features a 4-channel vacuum container, including four tubular plastic membranes, and a vacuum pump. This degasser has a maximum flow rate of 0-10ml/min flow rate per channel and 5-10ml/min at reduced degassing performance. Binary pump: Flow Precision: <0.3 % RSD (typically <0.15 % RSD) Flow Range: Setpoints from 0.001 to 5.0 ml/min,  in 0.001 ml/min increments Operating range: 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) Pulsation: <2 % amplitude (typically <1 %) at 1 ml/min isopropanol at all pressures >1 MPa (> 10 bar, >147 psi) Compressibility compensation: User selectable, based on mobile phase compressibility Delay volume: 180 – 480 µl (600-900 µl with mixer) dependent on back pressure Recommended pH range: 1.0 – 12.5. Solvents with pH <2.3 should not contain acids which attack steel Well-plate autosampler: Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display Injection range: 0.01 – 8 µl in 0.01 µl increments Precision: Typically < 0.5 % RSD of peak areas from 5 – 40 µl, Typically < 1 % RSD from 1 – 5 µl, Typically < 3 % RSD from 0.2 – 1 µl Sample viscosity range: 0.2 – 5 cp Sample capacity: 2 × well-plates (MTP) + 10 × 2 ml vials, 100 x 2 ml in one tray, 40 x 2 ml in half tray Injection cycle time: Typically < 30 s using following standard conditions: Default draw speed: 4 µl/min, Default eject speed: 10 µl/min, Injection volume: 0.1 µl Carry-over: Typically < 0.05 % using the following conditions: Column: 150 x 0.5 mm Hypersil ODS, 3 µm Mobile phase: Water/Acetonitrile = 85/15 Column Flow rate: 13 µl/min Injection volume: 1 µl caffeine (=25ng caffeine), 1 µl water to test carryover. Outside wash of needle before injection: 20 sec with water using flush port Thermostatted colomn compartment: Temperature range: 10 degrees below ambient to 80 °C, up to 80 °C: flow rates up to 5 ml/min Temperature stability: ± 0.15 °C Temperature accuracy: ± 0.8 °C (± 0.5 °C With calibration) Column capacity: Three 30 cm Warm-up/cool-down time: 5 minutes from ambient to 40 °C, 10 minutes from 40 – 20 °C Dead volume: 3 µl  Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN via other series module Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. Variable wavelength detector: Detection type: Double beam photometer Light source: Deuterium lamp Wavelength range: 190 – 600 nm Wavelength accuracy: ± 1 nm Bandwidth: 6.5 nm Linearity:> 2AU (5%) upper limit Flow cell standard: 14 µl volume, 10 mm cell path length, 40 bar

This white freezer from Beko is a sleekly designed freezer with a handy layout. The Beko RFNE270K31W (more)N has a net capacity of 214 liters, with the freezer compartment equipped with a No-Frost system. So you never have to defrost this freezer again. Dimensions (HxWxL): 1518 x 595 x 655 mm Volume: 214 l Weight: 63.5 kg

Max capacity: 4x 100 mL Max density: 1.2 kg/dm³ Speed: 18000 rpm Force: 23907 RCF Dimensions (WxDxH) (more): 420 x 490 x 300 mm Weight: 24.5 kg Equipped with: 1x Hettich 1624 swing-out rotor (max 4000 rpm) 4x Hettich 1381 bucket 4x Hettich insert (4 tubes (∅xL) 18 x 100 mm)

Minimum temperature: -10˚C Temperature resolution: ±0.1˚C Pump type: Turbine Compressor: 1HP Heating (more): No (refrigeration only) Flow rate: 11 L/min Pump pressure: up to 5 bar Reservoir capacity: 4.2 L Cooling capacity: 2.7kW (at 20˚C) Dimensions (LxWxH): 370 x 700 x 580 mm Weight: 90 kg

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

Max stirring quantity (H2O): 0.25 l Maximun load: 0.5 kg Speed range: 500 – 1800 rpm Max stirring ba (more)r length: 30 mm Set-up plate material: synthetic (PP) Set-up plate dimensions: Ø 80 mm Dimensions (WxHxD): 140 x 42 x 140 mm Weight: 0.747 kg

Temperature range: Ambient +5°C to 150°C Temperature display resolution: 0.1°C 4 digit LED Temperatu (more)re uniformity: ± 0.2°C (at 37°C in block) Temperature accuracy: ± 0.3°C Dimensions (WxDxH): 200 x 265 x 83 mm Weight: 2.2 kg

Range: -2.0 to 16.0 pH pH Resolution: 0.1 pH pH Accuracy: ±0.1 pH Temperature Range: -5.0 to 60.0°C  (more)Temperature Resolution: 0.1°C Temperature Accuracy: ±0.5°C Calibration: Automatic, at 1 or 2 points with 2 sets of memorised buffers Battery Type/ Life: 4 x 1.5V with BEPS / approx. 300 hours of continuous use; auto-off after 8 minutes of non-use Dimensions: 163 x 40 x 26 mm Weight: 100g

This functional thermometer is ideal for simultaneously measuring indoor and outdoor temperatures. P (more)laced near the window, the sensor cable for measuring the outside temperature is simply led outside. The max. min. memory with manual reset allows you to observe the peak values over a self-selected period of time. The application possibilities of the measuring device with sensor cable are diverse and not only limited to the outside temperature. Thanks to the large measuring range, the waterproof sensor can also be used to check the temperature of refrigerators and freezers or to measure the water temperature in the aquarium. Measuring range temperature cable sensor: -50°C to 70°C Temperature measurement range outside: -50°C to 70°C Temperature indoor measuring range: -10°C to 50°C Cable length: approx. 290 cm Dimensions (LxWxH): 70 x 20 x 110 mm Weight: 90g

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

Turbidy meter LTP4

Watson Marlow 505S Peristaltic Pump with Pumphead 508MC2 505S Manual Drive 55RPM ( 056.5821.000 ) 50 (more)8MC2 Eight Roller Two Channel Micro Pumphead ( 053.6280.000 ) Maximum rotor speed : 55 – 220 RPM 100-120 V / 220-240 V | 50/60 Hz | 50 W This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.

The Bioptechs Delta T heated lid device, which will provide a condensate free optical surface on top (more) of a Delta T dish through which specimens can be trans-illuminated on a inverted microscope. It also provides a port for the introduction of gas above the specimen. The Delta T is unlike any other specimen-warming device. It transfers heat directly to the cells by means of an electrically conductive optically transparent coating on the underside of the glass surface on which the cells rest. Please familiarize yourself with its operation and characteristics before conducting an experiment. The temperature transfer capability of the Delta T is extremely fast.Therefore, any time a new dish is placed into the stage adapter you must first press the “Reset” button to tell the controller that it is regulating a new dish. If the controller has been left on without a dish in the stage adapter or the stage adapter has not been plugged in while the controller is on, the controller will go out of range attempting to regulate something that is not there! Pressing the “Reset” button brings the controller back to its proper starting point.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

This Leica DM IRB/E Inverted Motorised Microscope was removed from a university lab where it was sur (more)plus to requirements. The item is in reasonable cosmetic condition. Parts of it are discoloured from dust/age while there are some stains in the joints/corners. The item is missing its stage and doesn't come with any additional components such as the electronic nosepiece control and a PSU for the light. The item powers on without issue but without a stage and the extra components we were unable to test it further. Included with this unit are the following:1x Leica cover 2x Leica eyepiecesL Plan 10x/20 M 1x Leica 476DI 5x objective506087∞/-/AN Plan5x/0.12 1x Leica Germany objective506205L 40x LMC∞/0-2/CHCX PL FluotarL 40x/0.60 CORR LMC

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply,&nbsp;Serial No: 9001305 008,&nbsp;Model No: SDS400-3628-1,&nbsp;SSI P/N: 20-0049-015N - Multifan 4394,&nbsp;GB-PAT: 2133082 2075288,&nbsp;ASSY by PAPST in Hungary&nbsp; &nbsp;- Dynode&nbsp;FINNIGAN P/N: 97000-98042 REV-C &nbsp;- Aux valve&nbsp;TYPE: DEMB3628028,&nbsp;S/N: 237085000104 &nbsp;- 5kV power supply&nbsp;97000 10070C &nbsp;- Ion Gauge&nbsp; &nbsp;- LED front panel + 4 screws&nbsp;ASSY No: 97000-61400 REV-C &nbsp;- Vent Delay PCB panel&nbsp;ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW