Radwag C32.0.6.D2 Multifunctional Scale

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Temperature range: Ambient +5ºC to 70ºC Temperature variation: ±0.2ºC Temperature setability: 1ºC Te (more)mperature deviation (spatial): ±1ºC Heating up time to 37ºC: 27 min Fan speed control: 4 Max load per shelf: 20 kg Maximum load total: 50 kg Capacity: 23 L Internal dimensions (WxDxH): 325 x 260 x 270 mm Dimensions (WxDxH): 515 x 455 x 490 mm Weight: 27 kg

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab These items were removed  (more)from a university where they were surplus to requirement. All items are in very good cosmetic condition and untested. This listing comprises: 6 x Schmersal RST 36-1Part#: 101213820 1 x Schmersal RSR 36-D-R-STPart#: 101213956 5 x Schmersal RSR 36-D-S7Part#: 101213954 14 x SD-Y-ADAPTER 9152/2781406 2 x Small Cable AL-WAK8-2, 5-AL-WAS8/S370/S4000 8057201 9242/2797213 9 x Medium Cable AL-WAK8-1,5-AL-WAS8/S370/S4000 8057200 0225/3159235 16 x Large Cable AL-WAKA-0,5-AL-WAS8/S370/S4000 8057197 8311/2457690

Kodak DirectView CR500 Computed Radiography Single Plate Reader This item was removed from a univers (more)ity where it was surplus to requirement. This is the reader/imaging part of a radiography system, no other parts of the system are included. It is in excellent condition and powers on, no further testing has been done. The power lead is included.

Tecan Freedom Evo Robotic Liquid Handler with TE-Vacs Vacuum Unit and Accessories This system was re (more)moved from a university lab where it was surplus to requirements. The system is in good cosmetic condition.The liquid handler powered on, but the vacuum unit could not be tested due to the lack of a computer control system. No further testing was carried out. There is no PC or software included in this system. The system comprises the following: - Tecan Freedom Evo Unit - Serial No.: 802001119 - Equipped with two robotic arms: one for plate handling and an eight-head injector arm - Tecan TE-Vacs Vacuum Unit - Serial No.: 802001120 - Aluminium stand (150 x 100 x 82cm), supplied flat-packed Included Accessories: - 1 x Kingston 480GB SSD internal memory storage - 7 x Injector pump piston plungers - 8 x Syringe head tubes - 5 x Syringe head tube sheaths - 8 x Insert LV Diti Standard Cone Genis Ref. 10612518 - 1 x 10-litre square plastic bottle - 1 x 5-litre plastic bottle with 3 suction hose nipples and 1 probe - 2 x 10-litre plastic waste and system liquid bottles - 1 x Diti Waste and Wash Station assembly - 6 x Coils of waste and system liquid hoses - 1 x Tecan Te-Shake plate shaker - 4 x Plate storage stacking towers - 6 x 4-plate holders - 2 x 3-plate holders - 5 x Pipette plate holders - 1 x Thermo Finnpipette FP-Focus MCP12 (30-300 microliters) - 4 x Thermo Finnpipette FP-Focus (0.5-5ml)

The RB 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of filt (more)er mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and redability of d= 1 µg. The device enables weighing up to 1020 filters with 47 mm diameter. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Fully automatic system for weighing filters with Ø 47 mm Compliance with EN 12341:2014 standard Conditioning and weighing of up to 1020 filters Additional reference magazine Less time consumed when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter (version without air conditioning on request) Increased pressure in the chamber prevents contamination The RB 2.5Y.F filter robot comprises: Two magazines for filter storage and weighing. Each magazine consists of 34 discs with 15 filter positions. A six-position reference magazine for storing mass standards and reference filters. A robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; Microbalance with a draft shield; Ionizing system; An air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; Ambient conditions monitoring (temperature, humidity, pressure); Weighing indicator for managing of the device operation; QR code reader integrated with the device; QR code printers; A PC with the RMCS Filters software for managing the device operation; Control and adjustment system; An external air conditioning unit.