Laboratory equipment

Manufacturer: CS CLEAN SYSTEMS GMBH Model: CLEANSORB CS 065 SC Scrubber (LABLINE) ..was in use for B (more)utadiene. YoM: 09/2004 S/N: CS24083 Description: CLEANSORB® LABLINE The CLEANSORB LABLINE features a small absorber column housed in a compact, air-extracted cabinet. A particular advantage for sporadic laboratory work is the passive operating principle. The LABLINE is always ready and does not have to be switched on, heated up or otherwise activated each time a new experiment is to be run. The wide selectivity of CLEANSORB® chemisorber media to a diverse list of gases and liquid precursors, ranging from corrosive or toxic species to latest-generation metalorganic complexes, offers ideal flexibility for R&D requirements. Your advantages: - Negligible installation costs for laboratory environment, simple to operate- Long column lifetime on R&D applications – low running costs- Can be used to abate combined vent purge gases from several gas cabinets- Front panel control and parameter display, volt-free contacts and a digital signal interface Technical Informations:On Top Connection for cabinet air extract ø100mm For Compressed air: Swagelok-connector (1/4" or 6mm), 6-7 barFor Nitrogen: Swagelok-connector (1/4" or 6mm), 6-7 barGas outlet: 25-40KFGas inlet: 25-40KF In-Line Cable: L1/N/PEPneum./CDA: 0,7 MPaN2 high purity: 0,7 MPaMains: 230V @ 50/60 Hz with installed TX-4000 KFP Gas Detector The Cleansorb Dry Bed Absorber is in good cosmetic condition and 100% fully functional. Comes out of running Laboratory and was tested before deinstallation.

FURTHER DETAILS TO FOLLOW

Hersteller: SINGER / EATON Corp. Modell: 17/27 EMI

One PCM Synchronizer Decoder Manuf.: EIDSVOLL Electronic Norway - EIDEL Model: EE 4100 S/N 100 Descr (more)iption: bitrate.....................................................analogue inputs = 20 Hz to 2 MHz.....................digital inputs = 10 Hz to 2 MHz codes..................................................... BIO-L....-M.....-S.....DM-M.......-S.....NRZ-L......-M.....-S.....NRZ-L.....+ CP word length........................................... 6-16 Bits plus parity, if selected frame length.......................................... 1 - 4096 words, any number, Bit per frame < 65536 format length......................................... 1 - 256 frames, any number parity........................................................ odd....Even or None data alignment....................................... MSB or LSB first in time many inputs and outputs and features.......instrument for skilled buyer for professional applications power supply.......................................... 115 / 230 VAC MAINS Interfaces..................................................RS-232C and IEEE 488 PHOTO from REAR with all inputs and outputs available on REQUEST......via EMAIL Instrument is in used, good cosmetic condition, comes with original MANUAL for Operation and Service wit all technical information comes out of opearation in german GOV LAB and is 100 % fucntional

FURTHER DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Leitz Model: Orthomat E The Leitz Orthomat E is in used but good cosmetic condition an (more)d 100% functional

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Agilent / Keysight Model: E5515C (8960 Series 10) Wireless Communications Test Set S/N (more): MY47511325 (Last Calibration Oct, 2013) Options: 002    -    Second RF source. (Required for all  GSM, GPRS, and EGPRS applications.)003    -    Flexible CDMA base station emulator. (Required  for all cdma2000/ IS-95/AMPS, W-CDMA, and 1xEV-DO applications.UK6  -    Commercial calibration certificate with test data. Description: The Keysight E5515C hardware platform for the 8960 Series 10 wireless  communication test set offers mobile manufacturers immediate competitive advantages. Developed for high-volume, automated mobile phone manufacturing  test, the proven 8960 wireless communications test set offers speed, accuracy, repeatability, multi-format capability, ease of programming, and  format-flexible architecture. For the mobile manufacturer, this translates into lower test costs and higher production output to help meet  customer demand for phones now and into the future. GSM/GPRS LA rev H - E6701H - licensedEGPRS LA rev A - E6704A - licensed Items delivered: - E5515C 8960 Series 10 Wireless Communications Test Set- Power Cord- Instruction Manual as PDF via E-Mail

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: ERWEKA Model: TPK 2 S/N: 124164.10d5 MFG date: 2005 Description: The ERWEKA Valve-Box (more) is testing unit for Dry Powder Inhalers.With Dry Powder Inhalers, both the emitted and fine particle dose are affected by the strength and duration of the patient’s inspiration.The ERWEKA Valve-Box allows the user to adjust the air flow from the Vacuum pump in such way, that it complies with the latest pharmacopoeial specifications.If required hard-copy documentation of the test-parameters can be created. Specifications and features: TPK Version 1.07AThe TPK 2 menu system automatically guides the user through the correct test set-up procedure.A series of menus guide the user through the operation of the instrument.Two external pressure ports.4-line LCD display of all parameters.USB printer port interface for data output.U: 240 vF: 50-60 Hz Items delivered: - ERWEKA TPK 2- Power Supply- Instruction Manual as PDF via E-Mail request Condition: The Valve-Box is in very good cosmetic condition and 100% functional tested.

Manufacturer: Olympus Model: U-SLH Slide Filter with Rotating U-SLH Filter Slider with 4 Positions a (more)nd rotating half beam block Items delivered: - Olympus U-SLH Slide Filter with Rotating Half Side Beam Block

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FURTHER DETAILS TO FOLLOW

Manufacturer: MPW Med. Instruments Model: Angle Rotor 11461 with Lid Keyfacts: Max Speed:  18000 rpm (more)RCF max.  18187Angle   45°Capacity  24 * 1,5 ml / 2 ml Items delivered: - Angle Rotor 11461- Angle Rotor Lid 11461 The Rotor is in a like new condition and 100% functional tested. - Ready to use

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

one UNUSED - NEW Condition - Thermo-Hygrometer Manuf.: AIRFLOW / GERMANY Model: TH-1 Description: M (more)easuring Ranges: °C......................................................-20 °C  to +80 °Crelative Humidity...........................10 % r.H..to...95 % r.H.Accuracy: °C..........................................................+/- 0.3 °Crelative Humidity...............................2 %ambient temperature........................instrument = 0 ....40 °C................Sensor = -20..............+80 °Craection time.......................................°C = approx. 30 secs...............r. H. = approx 60 secs ( 90 % )power supply......................................9 Volt ALKALINEanalogue OUTPUT............................0 volt .............1 Volt ( FULL RANGE ) comes with original case and manual ( full copy ) in german instrument is in  UNUSED, like  NEW cosmetic condition and 100 % functional tested

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MORE DETAILS TO FOLLOW

Manufacturer: Meridian Biosciene, Inc. Model: illumipro-10™ Incubator Reader with Thermal Printer P/ (more)N: 610172 S/N: IP2010 Description: The illumipro-10™ is an automated isothermal amplification and detection  system for use with Meridian Bioscience, Inc. illumigene® Loop-Mediated  Amplification products.The illumipro-10™ is intended to be used by trained laboratory professional  users in laboratory settings. Isothermal amplification is carried out by two independently controlled heat  blocks capable of operating between 55 C and 65 C, and within 1 C of the  temperature set point. The isothermal amplification temperature set point is dictated by the  illumigene Assay selected. Isothermal amplification time is monitored by the illumipro-10’s internal timer. When in operation, the illumipro-10 will display  ‘Test in Progress’ as well as block temperature and incubation time remaining. DNA amplification detection is completed by the illumipro-10 optics system. Each  illumipro-10 block contains laser diodes illuminating at 650 ± 20 nm and corresponding detectors monitoring light transmission across each illumipro-10  well. The illumipro-10 performs an initial check of the optics system prior to run start. Observed failures in the optics system disable the instrument  block until the failure can be resolved. After successful optics verification, the illumipro-10 checks for the presence of an illumigene test device in each  well. The illumipro-10 automatically enters a Sample ID of ‘EMPTY WELL’ for all wells that a test device cannot be detected in. The illumipro-10 measures  the absorbance of each illumigene test device at the beginning and end of the isothermal amplification incubation. Sample results are reported as INVALID,  POSITIVE, or NEGATIVE based on the observed change in absorbance. Key Facts: • Optimal flexibility for stat or batch runs• True walk away capability for optimized workflow• Very low maintenance requirements enhance efficiency• Instrument verifications can be performed with in-house personnel Features: • Digital Display (guides users through process)• Automatic system self-check• Reaction Blocks (operate independently)• Barcode reader (for sample ID entry)• Small Footprint (of instrument is only 21 cm x 29.2 cm) Performance features of the illumipro-10 include the following: • Self-diagnostics are performed at power-on and at Run start• Self-diagnostic for Test Device Placement and Optics Path Verification• Lid Closure Detection and Lid Lock Feature• Thermal Heat Block with Optics Detection at each well with Visible Light  Emission/Absorbance (650 ± 20 nm)• Interval Timer with Real-Time Assay Processing Time Display• Simple LCD User Interface for Instrument Set-up, Program Selection and Sample  Identification Input• Barcode Scanner for Sample Identification entry• External Keyboard available for Sample Identification entry• Attached Printer for results reporting• Control of amplification product carry-over through use of the self-contained  illumigene Test Device Items delivered: - Meridian Bioscience illumipro-10 Incubator Reader- Meridian Bioscience illumipro-10 Thermo Printer- Power Cord & Connection Cables- Instruction Manual The incubator reader is in absolutely like new condition and 100% functional  tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Waters Model: 2998 Photodiode Array (PDA) Detector P/N: 186002998 S/N: H08998 002A De (more)scription: The Waters 2998 Photodiode Array (PDA) Detector for Purification and Modular LC Systems offers advanced optical detection, providing unprecedented trace impurity detection and quantitation in conjunction with spectral analysis capabilities. It is the ideal detector for any laboratory application, from compound identification to method development. For routine analyses, the 2998 PDA detector is reliable, easy-to-use, and has enhanced software control to provide flexibility for simultaneous 2D and 3D operation. Features: - Patented TaperSlit flow cell ensures high sensitivity while maintaining optimal spectral performance- Low noise performance of <10 µAU- Wide, linear dynamic range with constant optical bandpass- Simultaneous quantification of high- and low-level components within a single chromatographic separation- Flexible sampling rates for normal and fast LC separations from 1 to 80 Hz- Independent optimization of sampling rate and time constant gives you the ability to tune your detector to your separation goals- Definitive compound identification & co-elution detection- Spectral exposure optimization to maximize the signal-to-noise across the entire wavelength range with a single Deuterium lamp- Lamp optimization for the best s/n performance over the lifetime of a Deuterium lamp- Console software for simple control, monitoring, and diagnostics- Thermal wander management for maximum baseline stability- Flow cell options to match your separation scale and type Specifications: Electrical requirements and power supply:- 100-240 V- 50/60 Hz- 185 VA- F 3.5A / 250V Items delivered: - Waters 2998 Photodiode Array (PDA) Detector Condition: The Waters 2998 Photodiode Array (PDA) Detector is in very good cosmetic as well as working and technical condition. It is 100% functional tested and ready to be applied.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW