Siemens SIMATIC WinCC C6.0 SP1 WebEdition 10 Clients 6AV6371-1DN06-0BX1 License

Increase your lab’s efficiency with the variable speed Thermo Scientific Tube Revolver/Rotator. A sm (more)all footprint, flexible design and simple display help increase flexiblity and effectiveness. Interchangeable rotisseries accommodate different tube sizes for maximum flexiblity. Each paddle can be adjusted from 0-90 degrees. Achieve more effective mixing with oscillating mode. Oscillation will occur at every 40 degrees in the rotation cycle. Small footprint Plug-and-play simplicity Maintenance-free motor, quiet operation Speed Range: 10 to 40 rpm Dimensions (LxWxH): 154 x 225 x 195 mm Weight: 1.2 kg Includes: 1x 50 mL paddle 2x 5/7 mL paddles 2x 1.5/2 mL paddles

Dimensions (WxHxD): 600 x 650 x 500 mm

Grant SUB 36 thermostatic waterbath. Capacity 36 L. Ambient temperature range +5 °C to 99 °C. Stabil (more)ity of ± 0.1 °C and uniformity of ± 0.2 °C. Display resolution 1 ºC. Stainless steel tank and digital control. Over-temperature protection and automatic cut-off. External dimensions (LWH): 720*325*300 mm. User manual. *Note: the temperature probe shown does not belong to the equipment. The Grant SUB36 Thermostatic Bath is a 36-litre unit designed to maintain consistent, accurate temperatures in laboratories. Ideal for viscosity testing and thermometer calibration, it offers precise temperature control with an easy-to-use digital display. Its durable, corrosion-resistant construction ensures reliability, while its compact design makes it suitable for laboratories with limited space. Versatile and efficient, the Grant SUB36 ensures consistent, accurate performance in a variety of laboratory applications.

Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (145 mm diameter) - Pt1000 Temperature Sensor for Precise Temperature Regulation - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

A hardness tester according to the principle of “Brinell”, type Pessimetro S2, in combination with a (more) large surface table. The hardness of materials with a thickness of max. 10 mm. can be tested by means of 5 different (in size) pressure bodies with a fine adjustment of 100 gr – 20 kg. force can be applied. The size of the impression is measured digitally using a Mitutoyo 543-250B (in 0.001 mm.). The hardness of the material is then calculated in (kgf) and the area of the indentation. Compression bodies: 1.5 mm. / 11 mm. / 30 mm. Dimensions table (WxHxD): 40 x 8 x 55 cm. Weight: 40 kg.

Qiagen QIAcube Automated DNA / RNA Purification Robot This was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition internally and externally, other than a missing panel covering the power button. Error 5167 happens when attempting to close the centrifuge lid because it is stuck open.Error with the centrifuge: cover opens before lid moves. We were unable to test this further. Therefore this item is sold as Spares or Repairs.

Taylor Hobson Form Talysurf -120L Surface Measuring Machine This system was removed from a universit (more)y where it was surplus to requirement. It is in reasonably good cosmetic condition. This item has not been powered on or tested further, therefore it is listed as Spares/Repairs. The lab informed us that it was faulty prior to removal. Includes the following: 1x Taylor Hobson CRT Monitor1x Taylor Hobson HP Desktop PC (Hardive removed)1x Taylor Hobson Motor Controller Driver1x Form Talysurf Series Power Supply1x Form Talysurf Series Printout unit1x Taylor Hobson Pneumo Multitasking Motor Controller.4x Booklets/User Guides1x Dallas Semiconductor Dongle Key

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.