LAUDA Proline PVL 15 heating thermostat

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD model - For tanks of 320 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 20 mm, length: 110 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Dimensions (WxHxD): 1200 x 1970 x 600 mm No keys included

Temperature range: Ambient + 5°C to 80°C Temperatuur accuracy (at 37°C): ±0.1°C Indication: 0.1°C in (more)crements Alarm signal with temperature deviation: ±1°C Speed setting: 25 – 500 rpm Speed accuracy: ±1 rpm Stroke: 25 mm Indication: 1 rpm increments Alarm signal with speed deviation: ±5 rpm Dimensions (WxDxH): 559 x 762 x 610 mm Platform size: 460 x 460 mm Weight: 79.4 kg