All categories

Oxford Diffraction Xcalibur PX Ultra Crystal Diffraction X-ray Generator System This system was remo (more)ved from a university lab where it was surplus to requirements. The system is in very good cosmetic condition, but several units encountered issues during testing, and no PC or control software is included. As such, the system is listed for spares/repair. - Further information regarding issues faced are stated below. The lab stated it had been not used for some time but had some issues. The system units include: - Oxford Diffraction Xcalibur PX Ultra - Serial No.: XXH-127/05 - Year: 2005 - Powered on with mains light, Shutter Closed status light, inner display screen, and hand-held remote keypad all functioning - Oxford Diffraction X-ray Protection Cabinet - Serial No.: XPD-127/05 - Year: 2005 - Thermo Scientific Neslab ThermoFlex 10,000 Recirculating Chiller - Serial No.: 1111473501170217 - Powered on but shut off after 1 second with error code "PHEr" (limit fault) - Oxford Diffraction KMW200CCD CCD Detector Chiller Unit - Serial No.: CCA 73/06 - Year: 2006 - Powered on, but no further testing possible - Oxford Diffraction KMC3000C X-ray Tube Chiller - Serial No.: CAC-142/05 - Year: 2005 - Powered on, pump ran, thermostat seemed functional, but not fully tested - Oxford Diffraction Cryodrive 2.0 - Serial No.: R72-0558 - 6944 running hours - Powered on, but no further testing without gas supply - Oxford Cryosystems Cobra Controller 700 Series Cold Head Controller - Serial No.: 741174 - Powered on, displayed ambient temperature, status lights, and responsive buttons - Parker NitroFlowLab Nitrogen Generator - Model No.: 4278 - Serial No.: 4278-13NFLC0008 - Powered on, displayed a message "writing information to an SD card," and did not allow further actions - Oxford Cryosystems Standard Cobra Nitrogen Control Pump - Serial No.: CB171 - Agilent HS 602 Vacuum Pump with NW25 Oil Exhaust Filter - Model: 849-9365R001 - Serial No.: 232830 - Year: 2006 - Produced a vacuum but failed a PAT test on insulation Additional notes: - All units passed a PAT test except for the Agilent vacuum pump, which failed due to insulation issues. - The Xcalibur unit and Neslab chiller were only visually tested due to larger power plugs. Manuals included: - Oxford Instruments Object Bench Software handbook - Xcalibur Series user manual - Thermo Scientific Recirculating Chiller Operation, Installation, and Maintenance manual - Oxford Diffraction KMC3000C user manual - Oxford Cryosystems Cobra operation guide - Safety Matters cryogenic safety manual - 2 x CrysAlis Pro user manuals - Oxford Instruments Cryojet Controller UMC002 manual - Workstation 4 VMware v4.52 Virtual Machine Software and manual Accessories included: - 1 x set of keys for safety cabinet - 1 x Long Fine Focus unit (Type OD2773/00, No. 163054) - 3 x glass vacuum traps (2 litres approx.) - 2 x vacuum pump platforms - 2 x Parker wound filter cartridges (Part No.: M11R10A) - 2 x Agilent KMW3000 filter cartridges (Part No.: IJ-00-01-002) - 1 x carbon filter nitroflow mobile - 6 x data cables - 4 x Cobra stainless steel line drier units - 1 x 4-way valve purge block - 1 x box of stainless armoured hose pipe and 1/4" plastic tubing

Taylor Hobson Form Talysurf -120L Surface Measuring Machine This system was removed from a universit (more)y where it was surplus to requirement. It is in reasonably good cosmetic condition. This item has not been powered on or tested further, therefore it is listed as Spares/Repairs. The lab informed us that it was faulty prior to removal. Includes the following: 1x Taylor Hobson CRT Monitor1x Taylor Hobson HP Desktop PC (Hardive removed)1x Taylor Hobson Motor Controller Driver1x Form Talysurf Series Power Supply1x Form Talysurf Series Printout unit1x Taylor Hobson Pneumo Multitasking Motor Controller.4x Booklets/User Guides1x Dallas Semiconductor Dongle Key

Varian Cary Eclipse Fluorescence Spectrophotometer w/ PC & Cary Eclipse Software This system was (more) removed from a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. PC has the following software installed:- Carry Eclipse Software. - Aquanova Software. The unit has been professionally serviced; a brief report summary is listed below. Checked Intensity of the lamp signal was fine and checked alignment was ok.Ran instrument software calibration checks with pass.Ran calibration checks using Ovalene sample in both Excitation and Emission modes.Results within spec.Instrument fine. Full report available on request.

Zeiss Axiovert 135 TV w/ XBO 75, Prior Motorised Stage & Control Lab This item was removed from  (more)a university lab where it was surplus to requirements. It is in good cosmetic condition and powers on successfully, with both lamps functioning. All mechanical elements operate smoothly. This microscope has been professionally serviced, the full service report is available on request. No objectives are included. Microscope Components:- Carl Zeiss Axio 3Fl Filter Slider - Filters: HQ, GFO, LP, BP 340, BP 380, FT 425, 500-530, FITC LP - Zeiss C-mount Camera Adapter (Model: 45 61 05) - Zeiss Phase Contrast Nomarski DIC LD Condenser (Model: 45 17 59) - Eyepieces: 2 x E-Pl 10x/20 - Zeiss HAL Lamp House (Model: 44 72 17) - Zeiss Illuminator Lamp House (Model: 44 72 16) Included Accessories and Additional Components: Prior ProScan III- Model: V31XYZ - Serial#: 79693 Prior Control Panel (Joystick)- Model: PS3J100 - Serial#: 80723 Prior Motorised Stage- Model: HK07X135 - Serial#: 1991 - Status: All items successfully communicate, with displays and LEDs fully functional. Includes motorised stage control via joystick, filter switching, and focus control. Does not feature a slide holder. Zeiss XBO 75 Lamp Power Supply- Model: J0470X - Serial#: 1626 - Status: Fully operational with correct cables for microscope connection. The hour clock was reset, showing only 30 minutes of use. Marzhauser Wetzlar Stage- Model: EK 130x85 Axiovert 200 - Serial#: 15042931 - Status: Non-motorized stage.

Priorclave  EV100 Top-Loader Autoclave This was removed from a university lab where it was surp (more)lus to requirements. The unit has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks.

This Thermo Spectronic French Pressure Cell Press was removed from a university lab where it was sur (more)plus to requirements. Thermo Spectronic French Pressure Cell Press FA078ESerial Number: 21QD066001 The item powers on and is in reasonably good cosmetic condition, we are unable to test it further at our facility.

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition with only minor usage marks. We have been able to connect the unit to the PC, but unable to test it further. It will likely require servicing before it is used. PC Equipment:-Dell Optiplex GX280 with Dell Monitor, keyboard and mousePSC QS6000 Plus Barcode Scanner PC has the following software:-Applied Biosystems 7900HT Version 2.3 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2 External dimensions -D85 W54 H76cm

This Priorclave Laboratory Benchtop Autoclave Type - PS/MVA/C40 was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and has been fully serviced. It is in full working order. It is in good cosmetic condition with minor marks. External dimensions - D66 W70 H66cmInternal dimensions - D50 W35 H29cm

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system is in good used cosmetic condition. The lab confirmed it was in working order prior to removal. We have been able to connect the unit to the PC, but are unable to test it further. It consists of the following parts: 1 x Applied Biosystems 7900HTPart no. 4330966SN - 279002990 1 x SICK CLV422-1910S02 Fixed barcode scanner 1 x AB 7067/4 Microplate stacker. 1 x Symbol Barcode Scanner. 1 x Dell Optiplex 960 PC with Dell Monitor, keyboard and mouse. The has the following software installed:-Applied Biosystems 7900HT Version 2.4 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2.1 We have all the passwords, which are available on request once the system has been sold.

Christ Rotations Vacuum Concentrator System RVC 2-25 CT 02-50 This was removed from a university lab (more) where it was surplus to requirements. All elements of the system power up and are in good working order. The system is in good cosmetic condition with minor marks. Included are; Christ RVC 2-25Type - 100225 Christ CT 02-50Type - 100502 Vacubrand Diaphragm Vacuum PumpModel - MZ 2C

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

Genevac miVac Centrifugal Concentrator System Lab This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). We are unable to test the system further at our facility. System includes the following: 1x Genevac miVac Control BoxType: 600037-05S/N: 084655 1x Genevac miVac PumpM/N: QUP-23050-A00S/N: QUP-230090077 1x Genevac miVac SpeedtrapM/N: MST-23050-A00S/N: MST02090324 1x Genevac miVac ConcentratorM/N: DUC-23050-A00S/N: DST02090233 1x Rotor 8x50ml tubesP/N: DRC-50CCT-008 1x Rotor 84x1.5ml tubes (fitted)P/N: DRC-15EPP-084 1x Genevac miVac Pressure Controller Manual

Bruker  MicrOTOF-Q ll Mass Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. This Bruker Spectrometer is for spares or repairs. The previous owner has had an engineer report that states a new turbo pump, communications board for the pump and other PCBs are required. It is in excellent cosmetic condition with only minor marks but is sold for spares/repairs. Model QT 0201 G 003Serial No. 228888.10222Year 2009 The unit powered on with the cooling fan operational and a red light showing on the STATUS indicator.No other testing carried out.

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab This system was removed  (more)from a laboratory where it was surplus to requirements. The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "The system is in good cosmetic condition. All units power up and communicate through the included Leica Application Suite X software.However, there is no camera included, so microscope images cannot currently be viewed via the PC. The system consists of: - 1 x Leica DM2500 microscope - Fitted with: - 1 x Leica 1531144511 Stage - 1 x Leica 11504058 Lamp - 1 x Leica 15-6504-202 Light Supply - 1 x Leica 1531323 Mirror Junction Box - 2 x Leica 507802 HC PLAN 10x/20 Eyepieces - 1 x Leica 507902 ACS APO 10x/0.30 CS Objective - 1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective - 1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional) - 1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV - 1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses) - 1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm) - 1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221) - Includes Leica TCS SPE to SPE II USB licence stick

Seal AA3 - 3x Control Modules, 3x Chem Trays, 1x 2L Diluter, and Pump This system was removed from a (more) university lab where it was surplus to requirements. The items are in fair cosmetic condition and power on. However, we were unable to get the system to connect properly due to the incomplete nature of the setup. The included PC is equipped with AACE 7 Software by Seal Analytical, but it couldn't be tested as the system is not complete. Included Items:- 3 x Control Modules - Serial Nos.: 8015593, 8015595, 8015596 - 3 x Chem Trays - Serial Nos.: 8015815, 8015813, 8015819 - 1 x 2L Diluter - Serial No.: 1473090 - 1 x Pump - Serial No.: 8015682

Shimadzu GC-2014 Gas Chromatograph This item was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition and powers on, but there is no software included.Therefore, we are unable to conduct further testing. The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software. Includes:- Manual - Users manual on disc - LabSolutions GC Solution release 2.30 Specifications:- Model: GC-2014 - Serial No.: C11484301470

PSS / Ramada Warehouse Shelf Racking with Boards Included are the following; Uprights, which are all (more) 90cm deep. 586cmQty: 6 507cmQty: 5   389cmQty: 5 Beams 278.5cm lengthQty: 226 Boards 134x89.5cmQty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level). Column guards and be included - 1 per upright We are happy to sell as a split purchase or full load Collection only from CF83 3HUWe can forklift load onto a suitable vehicle

Shimadzu GC-2014 Gas Chromatograph This item was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition and powers on, but there is no software included. Therefore, we are unable to conduct further testing. The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software. Includes:- GC-2014 Gas Chromatograph User’s Manual - Needles - Operation Manual - SGE Inlet Liners - Restek Septa - Hamilton Syringe Specifications:- Model: GC-2014 - Serial No.: C11484301470

Jenway 6705 UV/Vis. Spectrophotometer Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality. This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

LC Technology Solutions SP-1 Stand-alone Solvent Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further at our facility. We are told it was in good working order includes: -5x schafer solvent kegs - 5.16 USgal B (Max pressure 3 bar/ 43.5 PSIKegs manufactured 2016 -Welch Dryfast pumpModel- DryFast 20340-02S/N- 011700000778 -Operation manual

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab This system was removed from a university whe (more)re it was surplus to requirement. It is in very good cosmetic condition and powers on. The previous owner has notified us that this system is in full working order. This system includes the following: - Pharmacia LKB VacuGene Pump - ProXPRESS 2D User's Guide - ProXpress Test Sheets - 2950-2017 Gell Cassette Assy - 2950-2019 UV Gel Adaptor (Sealed) - 2950-2048 Calibration Sample Assy - PX2950-2006 - 2950-2049 Standard Wet Gel Cassette Assy - Phoretix Software - Proteome 1D Analyser Software and manual

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software This was removed f (more)rom a university lab where it was surplus to requirements. The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue. It is in good cosmetic condition with marks from use. Model - epMotion 5075SN - 5075 01005 Siemens Simatic PCEppendorf 6BK1800-0EP00-0AA0 Monitor not included.

This Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and has been tested extensively at 37˚C and 5% CO2 as well is 50% humidity. (Testing probes not included). We calibrated it to our working temperature and testing equipment, but will likely need calibrating again upon installation. It is in full working order. It is in good cosmetic condition with minor marks from use.

This GE Healthcare IN Cell Analyzer 2000 Imaging System was removed from a university lab where it w (more)as surplus to requirements. The unit powers on but has not been tested further. The lab Confirmed it was in full working order prior to collection. It comes with an HP PC, Monitor & Keyboard which has a number of programmes installed including In Cell Analyzer Workstation 3.7.2 It is in good cosmetic condition with some marks from use.

This was removed from a university where it was surplus to requirement. The unit powers up and is in (more) good working order. It is in reasonable cosmetic condition with marks from the sort of use you would expect a used machine like this to have. Model - W20.180SN - W201802221D

This GE Healthcare Life Sciences IN Cell Analyser 1000 System was removed from a university lab wher (more)e ti was surplus to requirements. The unit powers up but in testing we found an issue with the Liquid handling system's y-Drive. It is showing Error 42 - step loss encoder. We were unable to test it any further due to this and the software will not fully start up. It is in otherwise good cosmetic condition with minor marks from use.

This Zeiss LSM 510 Meta Confocal High Resolution Microscope System was removed from a university lab (more) as it developed a fault. The university reported: "We have a confocal microscope (Zeiss LSM510 Meta) which we are hoping to sell. It powers up but doesn’t fully work, there must be a loose connection somewhere but I don’t have the time or space to work out where." The units are all generally in reasonable used cosmetic condition. All parts do power up individually but we could not get the system to run either. We believe there should be a PC containing software that we do not have. The system is sold for spares/repairs. The system consists of: 1 x Zeiss Axiovert 200M Microscope (1312-732)Fitted with:1 x Zeiss 1269-455 Dual Illumination Source Motorised Mirror Switch.1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal.2 x Zeiss 1016-758 W-PI 10x /23 eyepieces.1 x HBO 100 Lamp 098.0042.000 (01/03163).1 x HAL 100 Lamp 42 30 00.With EBQ 100 Isolated Lamp PSU. 1 x Zeiss Laser Module 1294-260.Two of the wheels are broken, so they have all been removed and it has been put on a pallet. 1 x Zeiss LSM510 Meta System.Release 3.5 META 1305-593.With Zeiss Remote 1260-157. 1 x Microscope isolation table. Measures: 150cm L x 80cm W x 77cm H. 1 x Zeiss Temperature Control - 37 (0115.000). 1 x Zeiss AIM-SYSTEM Interface box 2436000101.

This item has just arrived in our stock. Please enquire for further details.

Redd & Whyte Preddator Liquid Handling Robot System This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use. There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system. 1x Windows XP Professional Installation CD 20021x Dell Monitor Software CD1x Dell Installation Software CD1x Windows XP Professional Installation CD, discs1, 2, 3 and 41x Datalogic WinHost 2.00 Configuration CD 20041x Moxa Networking CD1x Windows XP Professional Guide Pamphlet

This item has just arrived in our stock. Please enquire for further details.