Software development
We personally find you the right used, refurbished and new software development instruments & equipment from verified suppliers.
Software development is the category of laboratory software and the hardware that runs it, covering the programs that control instruments, acquire readings, and turn raw signals into analysable data. New, used and refurbished units are listed here, from a single-licence tool at EUR 1 to a full acquisition suite at EUR 73.171. Of the current listings, 73 percent are used. The entries span instrument control, data analysis, data management, and the embedded PC chassis that laboratory software is often deployed on. What distinguishes one listing from the next is less the code than the instrument it was written for and the version a buyer's existing hardware will accept.
Updated:
Software development product list
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
Showing 1–40 of 86 listings
Show 40 more listingsBuying guide
The deciding question in this category is rarely the software's feature list. It is compatibility: which instrument the package controls, which firmware revision it expects, and whether the licence transfers when a second-hand unit changes hands. A data analysis tool written for one mass spectrometer model will not read files from another, and a control package tied to a dongle or a node-locked key is worthless if that key stays with the previous owner. Before anything else, a buyer confirms the exact instrument, the operating-system version the software was validated against, and whether the licence is transferable or has to be re-issued.
That verification is sharper on a used listing, where 122 of the current entries sit. Ask what is actually included: the installation media, the licence certificate, any hardware dongle, and the version number. Software that controls regulated work may carry audit-trail and electronic-signature functions that only activate under a specific licence tier, so a lower-tier transfer can quietly drop the feature a lab bought it for. On the embedded PC chassis listed here, the same caution applies to the hardware itself: these are industrial systems built to sit beside an instrument for years, and a used chassis should be checked for its interface cards and the OS image it ships with.
Price spans the widest range of any laboratory category precisely because it mixes a utility licence costing almost nothing with a complete analytical software environment. Across 167 listings from 11 verified suppliers and distributors in 9 countries, prices run from EUR 1 to EUR 73.171, averaging EUR 4.095. A buyer working to a budget should read that spread as a map of scope rather than quality: the low end is single tools and add-ons, the upper end full control-and-analysis suites bundled with their chassis. Used and refurbished licences listed for sale are more affordable than new, and where warranty matters it is arranged in consultation against the individual listing. Dell, iEi Integration Corp, Radwag, Tecan, Applied Biosystems/MDS SCIEX account for most of the names here, which makes versions easier to compare against what a lab already runs.
Types of Software development
Which software types are listed in software development?
Among the listings that specify a type, the catalogue splits into instrument-facing and data-facing tools. Laboratory software is the broad control layer that drives an instrument and captures its output. Data analysis software takes that output and processes it: peak integration, quantitation, statistical treatment. Data management software sits above both, handling sample tracking, results storage and the audit records that regulated work depends on. Analytical software and mass spectrometry software are the specialist end, written for a particular class of measurement, and mass spectrometry software in particular is tied so closely to its instrument that the two are rarely separable. Alongside these sits the embedded pc chassis, the industrial hardware these packages are deployed on.
Much of this work is life sciences work. Mass spectrometry software underpins proteomics and metabolomics, reading the spectra that identify proteins and small molecules, and the same analytical packages serve molecular diagnostics where a result has to be traceable. Data management software is where cell culture records, electrophoresis gels and immunoassay plates are logged and retrieved, and in genomics it is also used for marshalling sequencing output into a form a researcher can query. These packages carry the chain from raw signal to reportable result across histology, microbiology and protein purification alike, which is why the licence tier so often decides whether audit-trail functions are present.
The brands behind the software-development listings
Dell, iEi Integration Corp, Radwag, Tecan, Applied Biosystems/MDS SCIEX lead the entries. Dell and iEi Integration Corp are hardware names, supplying the embedded and industrial chassis the software runs on, so their presence signals that complete instrument-plus-computer bundles turn up here, not just code. Radwag, Tecan and Applied Biosystems/MDS SCIEX are instrument makers whose software is version-matched to their own balances, liquid handlers and spectrometers. For a buyer that concentration helps: a package from a named maker is easier to match against an instrument already on the bench, and its version history is documented well enough to compare one listing against another.
What a used software licence costs here
The condition mix runs 122 used against 45 new, so 73 percent of the listings are used. Prices range from EUR 1 to EUR 73.171. That spread covers everything from a single transferable tool to a full suite shipped on its own chassis, which is why the average of EUR 4.095 sits well below the ceiling. Parts and licence media can be sourced via Questpair, and where a warranty is wanted it is arranged in consultation for the specific listing.
Frequently asked questions
What is software development in the laboratory context?
It covers the programs and the hardware they run on that acquire, process, and store experimental data, including instrument control, data analysis, and laboratory information management. On the Questpair catalogue this ranges from embedded pc chassis to analytical and mass spectrometry packages.
What does laboratory software actually mean?
Laboratory software is the instrument-control and workflow layer, the code that drives a plate reader, a balance, or a liquid handler from a connected workstation. It sits between the operator and the physical instrument.
How does this software work with an instrument?
The software sends commands to the instrument and reads back its raw output, which analysis or data management tools then process into results. Because the coupling is tight, a package written for one vendor's analyser will not read another's raw files.
What types are listed in this category?
The main types are laboratory software, embedded pc chassis, data analysis software, data management software, analytical software, and mass spectrometry software. The embedded pc chassis is the only hardware item in that list; the rest are programs.
What is this software used for?
Mass spectrometry software underpins proteomics and metabolomics, data management platforms track samples in genomics and molecular diagnostics, data analysis tools quantify cell imaging and flow cytometry output, and analytical software handles weighing and gravimetric work. Laboratory software handles the instrument control behind cell culture and bioprocessing runs.
How do I choose the right software package?
Start with the instrument and firmware revision on your bench, then check the compatibility matrix behind the version number to confirm the package serves that pairing. Only after that does the licence type and price become relevant.
What is the difference between refurbished and used listings here?
For software the distinction matters less than it does for mechanical instruments, since a licence or chassis does not wear. What counts in both cases is whether the licence transfers and whether the version still reads the data formats you need.
How much does a software package cost?
Listings range from EUR 1 to EUR 73.171, with the average near EUR 4.095. The spread reflects the distance between a single-seat analysis utility and a full data management deployment rather than one product's price range.
Which brands appear in this category?
The names here are Dell, iEi Integration Corp, Radwag, Tecan, and Applied Biosystems/MDS SCIEX. Dell and iEi Integration Corp supply the workstation and embedded hardware, while Radwag, Tecan, and Applied Biosystems/MDS SCIEX bring the instrument-bound software.
Is a warranty available on a refurbished package?
A warranty is often possible and is arranged in consultation for the specific listing. For software, confirm separately that the licence is transferable and the activation media or dongle is included.
Can I get parts for an embedded pc chassis?
Parts can be sourced via Questpair. For a chassis, check that interface cards match the instrument's connector and that the unit boots before relying on it.
How long does this kind of software or hardware last?
A licence remains useful as long as its version still reads current data formats and the operating system it runs on is still supported by the analytical software. An embedded chassis lasts as long as its hardware and interface cards match the instrument it serves.
New versus used: does it make a difference for software?
Used and refurbished listings are priced lower than new. Because a software licence's value depends on the instrument it serves rather than on wear, a used copy at the lower end of the band often does exactly what a new one would, provided the licence transfers and the version reads current data.
Where can I buy this software?
The Questpair catalogue holds 167 items from 11 verified suppliers and distributors across 9 countries. Of those, 122 are used and 45 are new.
What about lead time and shipping?
Lead time and shipping depend on the individual listing and supplier. The specialists on Questpair respond within an hour if you need to confirm availability for a specific item.
Does the software need calibration or maintenance?
Analytical software carries the calibration and statistical treatment of measurements, but the software itself is configured rather than calibrated. Questpair does not offer servicing, so verify a package's current state and licence status at the point of purchase.
Which types are listed most, and who reaches for each?
Laboratory software and data management tools make up the bulk of what specialists reach for. Mass spectrometry software is sought by proteomics and metabolomics labs, data management by genomics and molecular diagnostics, and analytical software by formulation and sample preparation work.
Which brands dominate this category and what does that mean for a buyer?
The hardware names, Dell and iEi Integration Corp, mean a buyer can usually find a matching or replacement platform without redesigning the setup. The instrument-bound names, Radwag, Tecan, and Applied Biosystems/MDS SCIEX, mean availability follows the installed base, so knowing which analyser sits on your bench narrows the brand list before price is weighed.
What separates the bottom of the price band from the top?
At the low end sit small analysis and conversion utilities, often single-seat tools. At the high end are enterprise data management platforms and bundled instrument-plus-software packages, which is where the instrument-bound brands carry the higher figures.