Laboratory equipment

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R 120 FALC

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R FALC

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION LABORATORY REFRIGERATOR (more) manufactured by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

PRECISION REFRIGERATOR FOR PHARMACIES manufactured by B Medical System SECURITY AND PEACE OF MIND -  (more)Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7' touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Weighing, piece counting, check counting and accumulation functions: Ranger Count 3000 is the ideal  (more)scale to meet many industrial counting needs. Portable and equipped with a rechargeable battery, this scale is useful in every corner of the factory and is packed with functions and features that elevate the Ranger Count 3000 to a class of its own. Accurate weighing and counting functions are ensured by the high resolution display, 30-item archive function and automatic optimization software that reduces errors. Easy to use in the most complex counting operations, it has three backlit LCD displays, as well as a central counting display and an easy-to-navigate menu. Applications Weighing, Parts Counting with Auto Optimization, Checkweighing, Accumulation Display 3 window backlit liquid crystal display (LCD), 3 color checkweighing LEDs Operation AC power (included) or rechargeable battery (included) Communication Easy access communication port including standard RS232 (included) and second RS232, USB or Ethernet (accessories sold separately) Construction ABS housing, stainless steel platform, numeric keypad, menu lock switch, up front level indicator, transportation handle Design Features 30 item library, 210 hours of battery life, 3 LED checkweighing lights with selectable operation and audible signal settings, auto tare, selectable environmental and auto-print settings, auto shut-off, optional 2nd scale input The Ranger Count 3000 series consists of 5 models, with different range / resolution: - RC31P1502: Capacity: 1,5Kg / Resolution: 0,05g - RC31P3: Capacity: 3Kg / Resolution: 0.1g - RC31P6: Capacity: 6Kg / Resolution: 0.2g - RC31P15: Capacity: 15Kg / Resolution: 0.5g - RC31P30: Capacity: 30Kg / Resolution: 1g

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. MODELS AVAILABLE InCal= internal calibration. ExCal= external calibration *CE approved models STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs - Reliable shaking over the entire speed range thanks to the robust triple eccentric drive Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates. Not sure which stirrer to choose? Download the Open Air Mixers brochure, a quick overview of all available models in the first pages.

Designed for daily use in the laboratory, dry block heaters are ideal for applications that require  (more)particular temperature stability. All units house two easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150 ° C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. Models with lid: from 5°C above ambient temperature to 100°C; like digital models but with a heated lid, to minimize condensation and preserve the integrity of the samples. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) ___________ Not sure which model to choose? Download the Dry Heater Selection Guide for a quick overview of all available models. For a complete list of available accessories, see our catalog: Ohaus Dry Thermostatic Bath Accessories

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 3000 model (measured with ethanol): - at 20°C, 3.00 kW - at 10°C, 2.40 kW - at 0°C, 1.68 kW - at -10°C, 1.03 kW - at -20°C, 0.60 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

The OHAUS Defender 5000 Series is an ideal bench scale for many industrial applications including ma (more)nufacturing, packaging, inventory and shipping, it also features advanced features such as highly configurable print output, GMP/GLP data output, library/user management, and multiple connectivity options. • LARGE CONTROL PANEL • STAINLESS STEEL PLATFORM • EASY DATA MANAGEMENT STANDARD FEATURES THE INDICATOR GUIDES YOU THROUGH THE ON-SCREEN MESSAGES The results appear clearly on the large backlit display. The alphanumeric keyboard and function keys simplify the user experience. On-screen messages and keys will guide you step by step during use. RUGGEDLY BUILT TO WITHSTAND HARSH INDUSTRIAL ENVIRONMENTS Ruggedly constructed with a stainless steel platform, painted steel frame and aluminum load cell, the Defender complies with OIML/CE approvals. Thanks to this, the Defender 5000 can be used for both general purpose and legal-for-trade applications. For standard industrial applications, Defender 5000 bench scales offer consistent performance at a very attractive price. basic structure? Removable stainless steel weighing pan with coated steel frame, silicone sealed IP67 aluminum load cell. MULTIPLE APPLICATION MODES AND LARGE STORAGE CAPACITY FOR GREATER FLEXIBILITY The indicator has the most common industrial modes and supports an archive of 50,000 articles and 1,000 user profiles that can be downloaded/uploaded for easy configuration (with SD card). It also features GMP/GLP with time/date function for results traceability. Multiple connectivity options for simple and convenient data transfer and storage The results can be stored in the Micro SD card. Data transmission via standard RS232 or optional interfaces including RS232/RS485/USB device, Ethernet and Bluetooth/WiFi, analog output and discrete I/O with relay. NEW TD52 INDICATOR THE INDICATOR GUIDES YOU THROUGH THE ON-SCREEN MESSAGES Results appear clearly on the large backlit LCD matrix display. The alphanumeric keyboard and keys simplify the user experience, guided step by step during use. Multiple application modes and large storage capacity for greater flexibility The indicator has the most common industrial modes and supports an archive of 50,000 articles and 1,000 user profiles that can be downloaded/uploaded for easy configuration (with SD card). It also features GMP/GLP with time/date function for results traceability. Multiple connectivity options for simple and convenient data transfer and storage The results can be stored in the Micro SD card. Data transmission via standard RS232 or optional interfaces including RS232/RS485/USB device, Ethernet and Bluetooth/WiFi, analog output and discrete I/O with relay. APPLICATIONS Weighing: calculation of the weight of the items in the selected unit of measure. Piece Counting: piece counting with uniform mass. The advanced automatic optimization software recalculates the average piece weight as a function of the increase in the overall mass. Checkweigh / Piece Check: Compare the weight/count of a sample against the set limits. Connection to discrete I/O kit and light tower for external control lamps. Percent Weighing: Calculation of the percentage of a sample weight relative to a pre-set reference weight. Dynamic weighing and display hold: calculation of an unstable load. The balance determines the average of several masses weighed over a certain period of time. The display hold function freezes the last stable mass manually and automatically on the display. Alongside the images of the control panel; in ABS above and below the stainless steel version. The different models of the Defender 5000 series are distinguished by the capacity/resolution, by the type of control panel (standard or in stainless steel), by the size of the surface and by the type of scale, flat or column. Models starting with D52P have ABS plastic panel and D52XWxxxx models have stainless steel control panel. SCALES WITH FRONT CONTROL PANEL: COLUMN MOUNTED SCALES: CONTACT US! For the prices of the individual models or for any further information, do not hesitate to contact us! Our specialists will answer you as soon as possible and will be happy to answer all your requests.

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Communication RS232 interface provides one-to-one communication for data collection and unit control (digital models) Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included. Technical characteristics of the SHHD2325AL model Transmission system: Brushless DC Motor; Triple Eccentric Calibration: Speed ​​calibration Orbit {metric}: 25 mm Power consumption: 75 W Safety certification: CE; TUV Speed ​​accuracy: ± 1rpm, greater than 100rpm ± 1% of set speed

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guara (more)ntees excellent thermal homogeneity and stability (±0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3 to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP) FOC Connect is supplied with the MODBUS communication protocol.

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, glass draft shield with top mounted side doors and flip / slide top door (1mg models), front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

Precision refrigerator for the safe storage of samples in the scientific and medical sector - Comple (more)te display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates