Radwag WAY 100.5Y.KO Mass Comparator

IN/OUT cable (PUE C41H, PUE HY10, PUE 5.15, PUE 5.19). Lenght 5 m. Cable types: Standard P0256.2: 2  (more)m Customized P0256.5 (extra charge): 5 m Customized P0256.10 (extra charge): 10 m Compatible with: Scales operated via PUE C41H terminal Scales operated via PUE HY10 terminal Scales operated via PUE 5.15 terminal Scales operated via PUE 5.19 terminal PUE C41H terminal PUE HY10 terminal PUE 5.15 terminal PUE 5.19 terminal HRP platform MWSH weighing module MWLH weighing module

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

This is the first receipt printer of RADWAG production. We offer two models which differ in terms of (more) communication interfaces: RTP-RU80 – RS 232* and USB, RTP-UEW80 – USB, Ethernet and Wi-Fi. The printers communicate with all RADWAG laboratory balances and industry scales. Their connection and configuration is intuitively easy and takes barely few moments (Plug and Play). Communication via Wi-Fi enables remote printing. The printers are equipped with a paper cutter ensuring operation ergonomics. The set includes: RTP-RU80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; RS232 cable, female/ male; 80 mm thermal paper, 1 roll; RTP-UEW80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; 80 mm thermal paper, 1 roll. *RS 232 port comes in a female version

PT0455 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a RADWAG RTP print (more)er. Its standard length is 1,8m.

Mass comparators of UMA 200 series stand for the highest standard of professional automatic mass com (more)parators. They provide comparison of 10 g – 200 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] 0.1 μg for loads ranging from 2 g to 50 kg.

ELMI Sky Line Digital Orbital Rocking Shaker Rocker S-4 Lab This item was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and in good working order. The power supply is not included.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale. The units have not been tested at all. ITEM-34625 Lot of Hanna Instruments pH Meters ITEM-41847 Metrohm 830 IC interface ITEM-41848 Metrohm 833 IC Liquid Handing Unit ITEM-41849 Metrohm 818 IC Pump ITEM-38036 Thermo Px2 Thermal Cycler With Thermo Hybaid PCR Express Lab ITEM-41914 HP 107a Laser PrinterITEM-41915 Lot of Three Of Cole-Parmer SHM-200 Heating MantlesITEM-41916 IKA MSC Basic C Heated Stirring PlateITEM-41917 Kroy K3110-PC Thermal Printer ITEM-41920 Pair of Thurlby 1503-HA Digital MultimetersITEM-41921 Lot of 3 Advanced Instruments DMM2 Digital MultimetersITEM-41922 Gould Advance DMM7A Digital Multimeter ITEM-41923 Philips PW9526 Digital Conductivity Meter ITEM-41924 Griffin Magnetic Stirrer ITEM-41925 Electrothermal M105 Heating Mantle ITEM-41926 Pair of Electrothermal M103 Heating MantlesITEM-41927 Pair of Electrothermal ML02 Heating MantlesITEM-41928 Reeve Computer Interface Control Box With Marconi RB2 Tracker Ball ITEM-41929 Tekman TE 200 Graph Printer Plotter ITEM-41930 Stuart 6M4 Magnetic StirrerITEM-41931 Pair of Griffin and George Galvanometers ITEM-41932 Reeve 9701 Radio Activity Monitor ITEM-41933 Pair of Bellingham and Stanley Polarimeters ITEM-41934 Meta Therm HPLC Column Control ITEM-41935 Elga Purelab Option Water Purifier Model OR007BPM1ITEM-41936 Pair of Buchi B-169 Vacuum Systems ITEM-41945 Four Position Ammeter Control Box With two RS Ammeters ITEM-41947 Lot of 4 Nuclear Enterprises SR7 Scaler Ratemeters ITEM-41948 Goerz Electro Potentiometer Schreiber Servoscribe Type RE 511ITEM-41949 Camag Universal UV Lamp Type TL-900 ITEM-41950 Lot of 11 NE Technology ST7 Scaler Timers ITEM-41955 Metcalf Brothers Hyflow Air Pump Model C ITEM-41956 Bellingham and Stanley Refractometer ITEM-41957 Thermo Separation Products Spectra Series UV Single Wavelength Detector ITEM-41958 Brooks 5850E Mass Flow ControllerITEM-41959 Hewlett-Packard Model 17422B 10v Power AdapterITEM-41961 Advance Instruments DMM2 Digital MultimeterITEM-41962 Stuart SMP11 Melting Point Apperatus ITEM-41963 Pair of Fluke 8050A Digital Multimeters

TQ TD1050 Steam Engine Trainer Teaching Rig This was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in full working order. System Parts:- TD1050 General AssemblyTQ160508-001 TD1050 - DTS2 Torque/Speed Display UnitTQ165554-001 TD1050-DT1 Temperature DisplayTQ160508-001 VDAS-F - VDAS Frame Mounted VersionTQ158991-010 Grosvenor PumpModel - 5520SN - 21248 Dynatherm Part no. 40993SN - 13057-1

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Ionizer Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty