Laboratory equipment

PacBio Sequel II Sequencing System Lab This unit is being sold on behalf of an operational universit (more)y laboratory. The system is in good cosmetic condition and full working order, it received a Maintenance check by PacBio on:13/04/2023. The full Maintenance report is available on request. The unit can be collected from the client in New York, but we may be able to discuss logistics around domestic US delivery at the point of sale. Also included are digital copies of the following: - Installation Summary - 3/3/2020 - Preventative Maintenance Summary - 10/5/2021 The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Beckman Coulter MoFlo XDP Cell Sorter Laser Cytomation System + Optics Table Lab This system was rem (more)oved from a university where it was surplus to requirement. It is in good cosmetic condition, the working condition of each unit that we were able to test is listed below. Parts of the system:- Optics Table - MoFlo Optical BenchSN - 2086Dimensions - L153 W122 H80.5cmMeasurement - Imperial Parts fitted on table:- Pressure Console UnitSN - 2086 Coherent SapphireModel - Sapphire LP USB CDRH Driver Unit w/displayPN - 1189089SN - LDP.1189089.C02070- Powers on Coherrent Sapphire 488-200 CW CDRHPN - 1137970SN - LDP.1137970.521683Heatsink Sapphire LP RoHS compl- NOT TESTED Coherrent CubePN - 1170509SN - C20010803- NOT TESTED Coherrent CubePN - 1193821/AASN - C14070901- NOT TESTED Hamamatsu Parts:-H957-27 (No.T0050)H957-18 (No.K0149)H957-27 (No.T3721)H957-25 (No.S0319)H957-25 (No.S0360)H957-25 (No.S0359)H957-25 (No.S0322)H957-25 (No.S0324)H957-27 (No.T0051)H957-27 (No.T0054)H957-25 (No.S0358)H957-25 (No.S0321)H957-25 (No.S0323) Smart Sampler 2 x Preamplifier UnitsSN - 2086 DTx Data Display 19" LCD w/TouchscreenBCI PN - B44222DTx PN - 90819SN - BCM0514F37003- Powers on via Miami MoFlo XDP Controller Under table units:- DTx BCI Miami MoFlo XDP ControllerDTx PN - 90692BCI PN - B20566DTx SN - BCM0915F44602- Powers on - When powered up, an error message reads 'OdinInstControl::connectMachine failed: AttachedInstrument::GetInstance:Repository had communication error!' Gast Vacuum PumpDOA-P501-BN- Powers on Intellipower UPSModel - IQ200V-C-DiAC-Isol-PFCSN - 2FKVDIFC5B15110524- Powers on Beckman Coulter Aerosol Evacuation System Buffalo Filter w/ PedalModel - 200-0179SN - 502135Has ViroSafe Filter fitted (PN-200-8166)- Powers on. 3 x 316L UM Alloy Products Corp Pressure Vessels:-SN - S533735-1-005 (2014)SN - S514233-1-011 (2010)SN - S507165-1-008 (2008) Other units:- Thermo Scientific Recirculating Water BathControl - C10 Type - 003-5009/SN - 1 08004133017Bath - K20 Type - 002-4276/SN - 08004052 003- Powers on Testing:-37˚c - Thermometer read 37.6˚c100˚c - Thermometer read 100.0˚c-20˚c - Thermometer didn't read lower than -13.5˚c Jun Air CompressorType - OF302-25MQSN - 0119802962- Powers on with compressor running Hours - 00898.3 Other spare bits:-1 x Black Case of various filters1 x Black Case containing 3 x Merlin Gerin fuses, Methanol & Acetone2 x Sets of Spare Shaped Charged Plates (one pair boxed)1 x Box of Filters1 x Box of mixed size O-ringsRed Ethernet cable5 x IEC Extension cables

MoFlo Astrios EQS Cell Sorter in BSL Hood. All units are in good used cosmetic condition. The system (more) powers up as it should. We were informed by the lab that the Red laser is faulty and requires replacement. The unit has the following lasers installed: 1 X 640NM - 106MW.1 X 561NM - 202MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 09/30/2013. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use.Powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system powers up fine. 1 x Thermo/Haake SC100/A28 re-circulator/chiller.Powers up fine. 1 x Intellipower UPS.Powers up fine. 1 x Jun-Air OF302 Silent Air Compressor.It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units. Also includes various spares and accessories shown in pictures.3 x '100' spare nozzle tips8 x '70' spare nozzle tips.

Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet This was removed f (more)rom a university lab where it was surplus to requirements. The PC with the system cannot run the software. The software is included but will require a Beckman OEM PC system to run. The unit has the following lasers installed: 1 X 640NM - 106MW.1 x 592NM - 200MW.1 X 561NM - 202MW.1 x 532NM - 150MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 04/13/2015.The unit has been powered up. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use. It powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system power up fine.

Intravital Microscope System - Zeiss Examiner Z1 with Accessories & Software This is being sold  (more)on behalf of a client. It is surplus to requirements. The system is in full working order, and in excellent cosmetic condition with minor marks. There are a vast amount of accessories, extras and add ons included with this system. 1. VivoTM 100 Intravital Microscopy Workstation Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-positionnosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodtcontrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Alsoincludes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorizedx,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components. 2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM Working distance 2.5mm. 3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopesincludes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22) 4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters) for LED illumination, includes quad-band dichroic and quad-band emitter Photomanipulation Equipment - 5. Ablate!TM Photoablation System for Fixed Position Illumination 532nm pulsed laser, pulse energy 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM. 6. Ablate!TM Epi Mount Adapter for VIVOTM Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination.7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources transmits 532 laser, reflects visible wavelengths >90% 8. Support Kit for Ablate! 9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. MODELS AVAILABLE InCal= internal calibration. ExCal= external calibration *CE approved models STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

FTC 120 is a small / medium-sized refrigerated thermostat specially designed for the incubation of u (more)nits for the measurement of BOD. The uniformity of the temperature, fixed at 20°C, inside the incubation chamber is obtained by means of forced air circulation. The digital display allows a constant display of the actual internal temperature. - Samples incubated at the standard of 20°C - 2 internal sockets to power BOD measuring devices - Accepts 3 BOD Sensor System 6 or 2 BOD Sensor System 10 - Uniform temperature through the use of forced ventilation - 2-digit display of the internal temperature - Ecological cooling system - Low operating cost - 2 shelves included Interior of the FOC 120E model, which differs from the FTC 120 model for the adjustable temperature and the wifi connection to the Ermes cloud by Velp. Large Capacity The VELP refrigerated thermostats guarantee excellent conditions for storing samples, always, and a large capacity, given the possibility of comfortably accommodating three BOD Sensor System 6 or two BOD Sensor System 10 simultaneously (available as accessories).

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (910 x 610mm) with non-slip rubber mat included.

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION REFRIGERATOR FOR PHARMA (more)CIES (glass door) produced by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Advanced refrigerator for the safe storage of samples in the scientific and medical sector - Complet (more)e display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - High performance compressor for greater energy efficiency - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity - Automatic internal LED lighting for lower energy consumption COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7" touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent device - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Guardian 2000 Ohaus - Economical, for general stirring and heating Ideal for education and laborator (more)ies requiring fast, economical daily heating and reliable stirring up to 15 litres. All three models offer a simple knob control to easily adjust the heating and/or stirring functions. The heavy-duty construction includes an optional support rod holder. Stir models include PTFE coated stir bars. ★ Safe heating up to 500°C and stirring up to 15L with an easy to use knob control ★ Rugged metal housing with spill resistant design. The smooth, chemical-resistant ceramic soleplate is easy to clean ★ Safety is of the utmost importance: the indicator light turns on when the plate exceeds 40°C, ensuring operator safety during all heating applications. Applications Boiling liquids, preparation of samples and stock solutions, buffers and dissolution reagents, preparation of media, concentration of samples Display Light indicator for hot plate, green light when unit is heating and/or stirring Functionality Simple knob control, agitation up to 1600 rpm, temperature up to 500°C (or 380°C for round plate model) power cord (included), agitation models include PTFE coated stir bar Construction Heavy duty metal housing, PET front panel, control knobs, ON/OFF switch to disconnect heater, integrated support rod holder, easy to clean ceramic coated resin, ceramic or stainless steel tops Clean and simple control panel. For education, it is designed for maximum safety in the classroom. Easy Swtich on/off for all models. Fast and secure. THE MODELS AVAILABLE: The Guardian 2000 is made up of 9 models. Models with hotplate only, with magnetic stirring only or with both. In turn, they can be chosen for the size of the plate: 102x102mm; 174x174mm; Ø135mm.

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. Reliable and easy to control Volume of 169 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F381 - Capacità di stoccaggio (sacche di plasma da 350ml): 284 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

CABINET CS 60 - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P01, th (more)ickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - CE marked electric fan with self-extinguishing, antistatic technopolymer case resistant to corrosive agents - Protection fuses: 5x20 mm, fast flow 1A - Aspirator flow rate: max 275 m3/h - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

The 'F' PREMIUM series plasma freezers are instruments of the highest quality and with state-of-the- (more)art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F901 plasma freezer - Storage capacity (350ml plasma bags): 690 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Precision refrigerator for the safe storage of samples in the scientific and medical sector - Comple (more)te display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Thermal shaker with Ohaus incubator OHAUS thermal agitators are designed for applications that requi (more)re constant and precise high-speed shaking, with heating or cooling. The temperature control allows to reach 17°C below the ambient temperature (for the model with cooling) up to 100°C. In case of high accuracy, the temperature can be calibrated by the user. Thanks to interchangeable blocks it is possible to customize the instrument for different applications, housing test tubes or microplates. The intuitive touchscreen allows the operator to view all program steps and monitor the entire process with a simple glance. - Best-in-class thermal performance thanks to advanced electronics and software. Up to 17°C below ambient temperature. - The intuitive touchscreen simplifies use and programming, with complete functions and help screens in six different languages, to assist the operator while using the unit - Easy creation of programs for repetitive applications. Memory for five different five-step programs. The USB port allows you to transfer test data to a flash drive for data collection and program storage Applications DNA, RNA, cell cultures, hybridizations, protein studies Display 4.3-inch (10.9 cm) color liquid crystal touchscreen (LCD) display, programmable in six languages Operation Detachable three-wire cable and plug (included). The unit requires a lock. Compatible with Eppendorf Thermomixer® R blocks Communication The USB port guarantees great flexibility in data collection and transfer Structure Cold-touch Valox construction, removable plastic rack, cover and screwdriver for block removal (included) Construction features Hot Cover Indicator, Audible Alarm, Maximum Temperature Limitation Function, Temperature Priority Function, Pulse / Fast Mix Mode, Temperature Calibration Mode, Temperature Rise Rate Function Technical Specifications - ISTHBLCTS Calibration: temperature calibration Transmission System: Brushless DC Motor Heating rate: 5°C/min Internal dimensions (HxLxW): 14.5cm x 28.7cm x 21.1cm Speed ​​Accuracy: ±2% Temperature accuracy (±): +/- 0.5°C between 20°C and 45°C; +/-2°C between 20°C and 45°C

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Striking the ideal balance of inventive features and functional and simple weighing capabilities, th (more)e OHAUS Adventurer Series presents all the applications you need for routine weighing and measurement tasks. Equipped with a color touchscreen, GLP / GMP compliance functions, two USB ports and much more, the Adventurer is the most complete scale in its class. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization / Statistics, Formulation, Density Determination, Display Hold Display 4.3 '' (109 mm) touchscreen display with VGA color graphics resolution and user-controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP / GMP data output. Structure Metal base, ABS top housing, stainless steel pan, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, full housing in-use cover Construction features Selectable environmental filters, auto tare, user selectable service life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user ID, up to 9 operating languages

- Storage capacity (cryobox): 150 - Storage capacity (2ml vials): 15,000 - 350 ml plasma bags: 150 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

Ohaus Defender 3000 Hybrid i-D33 Bench Scale Ideal for general purpose weighing, simple counting and (more) checkweighing applications for manufacturing, packaging, warehousing, inventory, shipping and receiving operations. The Defender 3000 series features a simple yet robust design, with stainless steel indicator and base plate and an IP65 load cell. The multi-colored backlit LCD display, AC power or standard rechargeable battery operation and flexible mounting options. In weight control mode, the display changes color (yellow / green / red) to alert the user when it is within the target weight range. Applications Weighing, weight control, counting, totalization Display 7-segment LCD with multicolor backlight Operation AC power cord (supplied) or rechargeable battery (supplied) Communication RS232 interface included and optionally USB Device or Ethernet for printing or data connectivity. Structure Stainless steel gauge, 304 stainless steel platform, powder coated tubular steel frame, IP65 aluminum load cell, adjustable non-slip rubber feet Construction features Overload protection up to 150% of range

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

Compact Counting Scale Ranger Count 4000 Ohaus The Ranger Count 4000 scale is the ideal tool for cou (more)nting tasks that require excellent robustness and high accuracy. A portable scale, with die-cast metal housing and rechargeable battery, is equipped with weighing, piece counting, check counting and summation functions to best meet industrial weighing, counting and measuring needs. - High-resolution display, 30-element archive function and automatic optimization software that reduces errors: accurate weighing and counting functions - Simple counting operations thanks to the three backlit LCD displays, a central counting display and an easy-to-navigate menu. - Eliminate waiting times and increase control of your activities with accurate results in a second. - Very easy to use thanks to the SmarText ™ software, a central display for counting and dedicated keys: sampling; Tare. - Accuracy of weighing and counting guaranteed by the internal counting resolution, equal to 1: 1,500,000 and by the software for automatic optimization, which reduces errors. - Sturdy metal chassis and non-slip rubber feet ensure the protection, stability and long life of the product. - Accurate weighing and counting functions are ensured by the high resolution display, 30-item archive function and error-reducing automatic optimization software. - Easy to use in the most complex counting operations. It has three backlit LCD displays, as well as a central tally display and easy-to-navigate menu. Application Weighing, Parts Counting with Auto Optimization, Checkweighing, Accumulation Display 3 backlit liquid crystal displays (LCD), 3 colored LEDs for weight control Operation AC adapter (included) or rechargeable battery (included) Communication Easy access communication port with RS232 interface (included) and second RS232, USB or Ethernet port (accessories sold separately) Structure Rugged die-cast aluminum housing, stainless steel platform Construction features Die-cast aluminum frame, stainless steel platform, sealed front panel, switch The Ranger Count 4000 series consists of 4 models, with different range / resolution: - RC41M3: Capacity: 3Kg / Resolution: 0.1g - RC41M6: Capacity: 6Kg / Resolution: 0.2g - RC41M15: Capacity: 15Kg / Resolution: 0.5g - RC41M30: Capacity: 30Kg / Resolution: 1g

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 5000 model (measured with ethanol): - a 20°C, 5.00 kW - a 10°C, 3.90 kW - a 0°C, 2.75 kW - a -10°C, 1.70 kW - a -20°C, 1.00 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display