BioTek ELx800 Microplate Reader

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: Thermo Fisher Scientific Model: KingFisher Flex Purification System YoM: 2015 Descrip (more)tion: The KingFisher Flex purification system provides plate-based handling (mix, capture, transfer, release) of magnetic particles for bead-based nucleic acid and protein affinity purification procedures. This easy-to-use instrument provides excellent reproducibility and minimizes the hands-on time required for DNA, RNA, and protein isolation from a wide range of sample types. The Thermo Fisher Scientific KingFisher Flex magnetic particle processor offers great flexibility for high-throughput purification of DNA/RNA, proteins and cells from virtually any source. Features: - Flexible, open system lets you customize your own purification process. - Patented magnetic particle processing technology lets you set your protocols and walk away. - Fully automated system yields high-speed purification of nucleic acids, proteins and cells. - Open and flexible system lets the customer use anymagnetic particle-based kit tomeet the application demands. - Easy-to-use Thermo Scientific™ BindIt™ Software provides instrument control, protocol creation andmodification. - Ready-made protocols for different type of applications are available. - Easy installation (ready to run in 10 minutes or less). - User-friendly graphical interface. - Four different magnetic head formats for wide volume range (20–5,000 µL). - With 24 configurations, customers can raise the processing volume up to 5mL, resulting in increased yield of the purified product. - Expands sample volume by 10-fold with the 24-well format. - High-throughput system processes up to 96 samples in 30 minutes. - Pre-loaded programs to perform protocols with MagMAX nucleic acid isolation kits. Application Areas: - Genetic testing - Microbial identification - Plant genetics - Evolutionary studies / Phylogenetics - Protein identification - Immunology - Genomics and proteomics - Target identification - Veterinary assays - Biomarker discovery - Quality control - Forensics The item is very complete and includes: - Thermo Fisher Scientific 711 KingFisher Flex Purification System - Pos. 6: 240 74430; KF Flex 96 DW head - Pos. 21: 030 0024;Tool 2 mm allen key, handled - Pos. 255: 240 75420; KF Flex 96 KF heating block - BindIt Software 3.3 - Connecting Cables - Instruction Manual (please see pictures for some other accessories) Condition: The whole system is in excellent like new cosmetic condition, 100% functional tested and ready to be operated.

Memmert HCP105 Humidity Chamber 107L, 115V Temperature Range Ambient +7°C to 90°C Humidity Control  (more)20 to 95% RH, or no RH Chamber Volume 107L (3.8 cu. ft.) Features - Ideal for climate and temperature testing, including accelerated life and 85/85 tests - Unsurpassed temperature and humidity uniformity across the chamber interior - Easy-to-use ControlCOCKPIT interface and AtmoCONTROL software for intuitive programming - Durable stainless steel construction that’s scratch-resistant and easy to clean - Six-sided heating, including heated inner glass door, to prevent condensation - Aluminum thermal layer for optimal temperature distribution and energy retention - Battery-buffered ControlCOCKPIT and optional MobileALERT for enhanced monitoring - Wide range of customizable test parameters for environmental simulation - Rear-panel feed-through and process runtime delay for precise test control - Comprehensive alarm functions and three-fold overtemperature protection for sample safety The Memmert HCP105 Humidity Chamber 107L, 115V is engineered to deliver precise climate and temperature control, making it ideal for a wide range of environmental and accelerated life tests, including the rigorous 85/85 tests. Offering a temperature range from Ambient +7°C to 90°C and active humidity control from 20% to 95% RH, this chamber creates a stable and highly customizable testing environment with an exceptional homogeneity of temperature and humidity throughout. Designed with Memmert’s user-friendly ControlCOCKPIT interface and the advanced AtmoCONTROL software, it features intuitive “Touch, turn & go” operation, allowing for straightforward programming of complex test parameters. Constructed with robust stainless steel that is scratch-resistant and hygienic, the HCP105 is built to withstand extensive use while maintaining a sleek, easy-to-clean design. Its advanced heating concept includes heating elements on all six sides and a heated inner glass door to prevent condensation and ensure uniform conditions. An integrated aluminum thermal conductive layer aids in maintaining optimal temperature distribution, while also providing a heat reservoir in case of power fluctuations. The chamber’s efficient humidity control prevents condensation buildup, protecting sensitive samples and reducing maintenance requirements. To support continuous and demanding tests, the HCP105 includes various convenience features like a rear-panel feed-through, battery-buffered ControlCOCKPIT for enhanced security, and optional MobileALERT for remote monitoring of alarm conditions via email or SMS. Additional safety features include three-fold overtemperature protection and real-time display of all essential parameters. With comprehensive programming options, reliable alarm functions, and precise environmental simulation, the Memmert HCP105 ensures both safety and accuracy, providing an optimal solution for laboratories focused on climate and temperature testing. INCLUDED: The Memmert HCP105 Humidity Chamber 107L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Water Tank - 2 x Sponge Plugs for Silicone Entry Ports - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 5 kg), wooden box Number of  (more)pieces in the set: 16

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW