Biotech and life sciences

LightCycler Nano Instrument – Real-time PCR amplification and detection instrument for tube-based as (more)says of up to 32 (4 x 8) samples per run, with minimal noise, footprint and weight. Assembled from just a few building blocks, the robust LightCycler Nano System is easy to transport and install. Up to 32 samples can be run in 0.2 ml tubes connected as strips. Fast heating and cooling is done using Peltier elements. Assay performance is supported further by a heated lid. Excitation is provided by high intensity LEDs filtered to provide light at 500 nm that is capable of exciting all fluorophores commonly used in qPCR. A prism is used to generate spectra from fluorescent emissions. These spectra are imaged using a CMOS camera. The LightCycler Nano Instrument is a 32-sample real-time PCR device for gene expression and genetic variation analyses in mono and dual color mode. Due to its small size, low weight and easy handling of reaction devices and software, this exceptionally silent instrument is ideal for scientists using real-time PCR for everyday use. The LightCycler Nano Instrument is designed for life science research only and not intended for use in diagnostic procedures.

The nanoPAC Mini Power supplies are an ultra compact and economic unit ideal for use with DNA (Horiz (more)ontal) and Protein (Vertical) electrophoresis systems. With enhanced features, such as a maximum constant voltage up to 300 and maximum constant current output of 400mA. The nanoPAC’s user- friendly interface is easily adjustable in 1V and 1mA increments, making it perfect for separations where precise settings are required. Its ultra compact size and two pairs of parallel power terminals, which can run two electrophoresis units simultaneously, save time and bench space. Maximum Voltage: 300 V Maximum Current: 400 mA Maximum Power: 60 W Number of Output Pairs: 2

The Horizon 20-25 Horizontal Gel Electrophoresis Apparatus is designed for separation of preparative (more) and analytical quantities of nucleic acids. It is suitable for agarose gel electrophoresis procedures in which buffer circulation may be required. The Horizon 20-25 apparatus is designed for simplified gel casting and electrophoresis. This apparatus is engineered for durable performance and easy storage. Current range: 4 – 360 mA, 0.5 A max Voltage range: 250 VDC Max

The Biochrom Expert 96 is a PC- controlled modern design multi-channel microplate reader, for fast p (more)late reading of standard ANSI SBS footprint 96 well, flat, round and v-bottomed plates. The Biochrom Expert 96 has four shaking modes for mixing of solutions and the ability to perform readings at timed intervals ideal for kinetic assays.

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-ti (more)me and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications. Advanced software and instrumentation for performing a wide array of genomic assays Sensitive 4-color optical LED recording system Intuitive and robust software perfect for both first-time and advanced users Simple and flexible instrument set-up and usage New StepOne Software The StepOne Software included with the StepOnePlus Real-Time PCR System runs on the Windows XP operating system and provides instrument control, data collection, and data analysis capabilities (analysis software is also compatible with Windows 7). This latest version includes capabilities to collect melt curve data for High Resolution Melt (HRM) applications and the option to export in Real-Time PCR Data Markup Language (RDML) for compatibility with MIQE guidelines. Rapid and Simple Assay Set-Up This remarkably simple Real-Time PCR system is designed with an LCD touchscreen and a user-friendly interface that brings the power of genetic studies to researchers new to Real-Time PCR. The intuitive software and protocol wizards help guide new users through their Real-Time PCR experiments. The StepOnePlus Real-Time PCR System also includes a quick-start setup so that you start a run immediately and enter plate information at a later time. Sensitive LED-Based 4 Color Fluorescence Reading The StepOnePlus Real-Time PCR System utilizes a long-life LED-based optical system that can record fluorescence from FAM/SYBR Green, VIC/JOE, NED/TAMRA, and ROX dyes. This cost-effective, 4-color, 96-well system delivers precise, quantitative Real-Time PCR results and saves data from all filters in every run without depending on a computer or plate setup. It can discriminate between 2 populations of 5,000 and 10,000 template copies of a TaqMan assay with 99.7% confidence. Compatible with Many Genomic Analysis Techniques Perform a variety of standard and demanding genetic analysis research techniques on one instrument using the user friendly StepOnePlus Real-Time PCR System and StepOne Software. The StepOnePlus System supports many Real-Time PCR applications, including the following: SNP Genotyping Gene Expression Analysis MicroRNA Expression Protein Expression Translocation Analysis Gene Detection Viral Load Analysis The included StepOne Software supports a variety of analysis methods , including the following: Standard Curve (absolute quantitation) Relative Standard Curve Comparative Ct (ΔΔCt) (relative quantitation) Genotyping and Presence/Absence Melt Curve Analysis (as a standalone application) High Resolution Melting (as a standalone applications) System will be discontinued as of July 1, 2024.

Temperature range: Ambient +5°C to 50°C Relative humidity: <90% at 37°C Humidity source: Water pan M (more)aterial: Stainless Steel Chamber material: Polished stainless steel Capacity: 184 L Interior dimensions (DxWxH): 508 x 541 x 681 mm Dimensions (LxWxH): 635 x 668 x 1003 mm Weight: 118 kg CO₂ module is defective and incubator is retrofitted to a normal incubator.

Edmund Bühler TiMix shaker equipped with a TH 10 incubator hood. Temperature range: 5°C above ambien (more)t to 50°C Temperature accuracy: ± 1% of the set value Motion: orbital Shaking platform: 400 x 300 mm for 8 microplates Max. load: 5 kg Shaking speed: 100 – 1400 rpm, steplessly adjustable Stroke: 3 mm Timer: 0 – 120 min / continuous Internal dimensions (WxDxH): 90 x 410 x 310 mm Dimensions (WxDxH): 510 x 490 x 555 mm Weight: 40 kg

Temperature range: Ambient +5°C to 50°C Relative humidity: <90% at 37°C Humidity source: Water pan M (more)aterial: Stainless Steel Chamber material: Polished stainless steel Capacity: 184 L Interior dimensions (DxWxH): 508 x 541 x 681 mm Dimensions (LxWxH): 635 x 668 x 1003 mm Weight: 118 kg CO₂ module is defective and incubator is retrofitted to a normal incubator.

The Countess II Automated Cell Counter is a fully automated cell counter and assay platform that use (more)s state-of-the-art optics and image analysis algorithms to analyze trypan blue-stained cells in suspension. Processing time: ~15 seconds Sample concentration range: 1 x 10⁴ to 1 x 10⁷ cells/mL Particle/cell diameter range: 4 60 µm (particles), 7 – 60 µm (cells) Required sample volume: 10 µL Optics: 1 channel (brightfield) Camera: 5 Mega pixels, 2.5x Optical Magnification

The Countess II Automated Cell Counter is a fully automated cell counter and assay platform that use (more)s state-of-the-art optics and image analysis algorithms to analyze trypan blue-stained cells in suspension. Processing time: ~15 seconds Sample concentration range: 1 x 10⁴ to 1 x 10⁷ cells/mL Particle/cell diameter range: 4 60 µm (particles), 7 – 60 µm (cells) Required sample volume: 10 µL Optics: 1 channel (brightfield) Camera: 5 Mega pixels, 2.5x Optical Magnification

Voltage range: 0 – 500 V Amperage range: 0 – 500 mA Power range: 0 – 150 W Timer: 1 – 999 min/0.1 –  (more)99.9 h Outputs dual in parallel, floating Leakage detection: > 500 μA No load detection: < 0.1 W Dimensions: 300 x 120 x 180 mm Weight: 5 kg

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

2 universal blocks with 48 wells each and standard lids for 48 x 0.2 ml tubes or 24 x 0.5 ml tubes w (more)ith flat caps per block Temperature range: +4 to 105°C Block accuracy: ± 0.1°C Block homogeneity: ±0.2°C at 72°C Heating and cooling rate: Max 5°C/s Programs: Unlimited programs via network PC or USB memory sticks: Internal memory for 500,000 standard PCR protocols

The HORIZON system from Halo Labs employs Backgrounded Membrane Imaging (BMI) technology to measure  (more)and characterize subvisible particles in a high-throughput, low volume format. BMI has its roots in membrane microscopy – a USP lot release method that images particles on a membrane surface. The fully automated, fluidics-free HORIZON system utilizes disposable membrane plates and automated image processing to rapidly generate reliable and accurate particle counts and sizing. It can perform particle characterization in up to 96 samples in a single run using as little as 25 µL per sample. BMI is also insensitive to solution refractive index, enabling reliable measurement of translucent protein aggregates. The HORIZON system uses sophisticated imageprocessing techniques to analyze images and acquire particle data. The key is to first take a background image of the membrane. After samples are filtered through by vacuum and the particles are captured, the same membrane is re-imaged with sample particles on the surface. The sample image is precisely aligned with the background image and then processed pixel by pixel so that the background texture is eliminated, and particles are viewed in high contrast. Backgrounding the image leads to high reproducibility and minimal interference from membrane texture and imperfections.

The freezing point osmometer K-7400S allows the easy and fast determination of the osmolality of var (more)ious aqueous solutions. Also, the freezing point depression of the samples can be read. The proven technology of freezing point determination in combination with the robust and intelligent design of the device allows reproducible measurements. The instrument is equipped with a peltier cooler and an integrated microprocessor controlling the automated measurement. The freezing point osmometer is a standalone device that optionally can be equipped with a printer. Sample volume: 150 µl Osmolality range: 0 – 2000 mOsmol/kg Resolution: osmolality; integer value without decimal part, e.g. 850 mOsmol, temperature; value with three digits, e.g. -1.576°C Test time: ~ 2 min Precision: SD ≤ 4 mOsmol/kg [0 — 400 mOsmol/kg], RSD ≤ 1 % [400 — 2000 mOsmol/kg] Linearity: ± 1 % [0 -1500 mOsmol/kg], ± 1.5 % [0 – 2000 mOsmol/kg] Calibration: Two-point calibration (0 mOsmol/kg and one freely selectable osmolality) Dimensions (WxHxD): 160 x 182 x 340 mm Weight: 5.3 kg

Temperature range: Ambient +5°C to 50°C Temperature distribution: ±0.2°C Temperature variation: ±0.1 (more)°C CO2 range: 0 to 20% CO2 variation: ±0.15% Humidity: 95 ±5% R.H. Alarm: Temperature, CO2 density, Upper temperature limit, Door Dimensions (WxDxH): 620 x 685 x 900 mm Internal dimensions (WxDxH): 490 x 505 x 665 mm Capacity: 164 L Weight: 91 kg

Camera for a gel documentation system No software As-is

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

Abbott Commander Incubator 8 shelves Type 6210/02

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-ti (more)me and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications. Advanced software and instrumentation for performing a wide array of genomic assays Sensitive 4-color optical LED recording system Intuitive and robust software perfect for both first-time and advanced users Simple and flexible instrument set-up and usage New StepOne Software The StepOne Software included with the StepOnePlus Real-Time PCR System runs on the Windows XP operating system and provides instrument control, data collection, and data analysis capabilities (analysis software is also compatible with Windows 7). This latest version includes capabilities to collect melt curve data for High Resolution Melt (HRM) applications and the option to export in Real-Time PCR Data Markup Language (RDML) for compatibility with MIQE guidelines. Rapid and Simple Assay Set-Up This remarkably simple Real-Time PCR system is designed with an LCD touchscreen and a user-friendly interface that brings the power of genetic studies to researchers new to Real-Time PCR. The intuitive software and protocol wizards help guide new users through their Real-Time PCR experiments. The StepOnePlus Real-Time PCR System also includes a quick-start setup so that you start a run immediately and enter plate information at a later time. Sensitive LED-Based 4 Color Fluorescence Reading The StepOnePlus Real-Time PCR System utilizes a long-life LED-based optical system that can record fluorescence from FAM/SYBR Green, VIC/JOE, NED/TAMRA, and ROX dyes. This cost-effective, 4-color, 96-well system delivers precise, quantitative Real-Time PCR results and saves data from all filters in every run without depending on a computer or plate setup. It can discriminate between 2 populations of 5,000 and 10,000 template copies of a TaqMan assay with 99.7% confidence. Compatible with Many Genomic Analysis Techniques Perform a variety of standard and demanding genetic analysis research techniques on one instrument using the user friendly StepOnePlus Real-Time PCR System and StepOne Software. The StepOnePlus System supports many Real-Time PCR applications, including the following: SNP Genotyping Gene Expression Analysis MicroRNA Expression Protein Expression Translocation Analysis Gene Detection Viral Load Analysis The included StepOne Software supports a variety of analysis methods , including the following: Standard Curve (absolute quantitation) Relative Standard Curve Comparative Ct (ΔΔCt) (relative quantitation) Genotyping and Presence/Absence Melt Curve Analysis (as a standalone application) High Resolution Melting (as a standalone applications)

The Biostat RM (Rocking Motion), is a fully GMP compliant, wave-mixed bioreactor. It is used with si (more)ngle-use Flexsafe RM bags which are proven for a broad range of different cell lines incl. CHO, NS0, SF9, E.coli, stem cells and CAR-T cells. Depending on your individual process needs and working volumes you can choose from a variety of system and bag configurations. The wave generated in the RM bags due to the rocking motion ensures effective gas exchange through the gas-liquid interface. Four different gas lines for air, O2, N2 and CO2 are equipped with flow meters and four high-precision mass flow controllers. An integrated pressure sensor continuously measures the pressure inside the bag. To ensure process safety, aeration is switched off when an upper threshold is reached.