Biotech and life sciences

The Applied Biosystems 7500 Fast Real-Time PCR System offers maximum performance in the minimum time (more) for labs running a variety of applications, including High Resolution Melting (HRM) analysis. Fully optimized for Fast cycling, the 7500 Fast System delivers high-quality results in as little as 30 minutes. The 7500 Fast System enables more runs per day with the excellent performance equivalent to that offered by the 7500 System. The Applied Biosystems 7500 Fast System is the original Fast solution including validated Fast reagents and over 700,000 TaqMan Gene Expression Assays. Specially designed Fast block ensures thermal uniformity at top speeds TaqMan Fast Universal PCR Master Mix and Fast SYBR Green Master Mix enable-rapid results with excellent assay performance equivalent to that of standard real-time PCR Fast optical plates ensure excellent precision in 5 – 30 μL reaction volumes Fast ramp rates enable rapid results without compromising extension times or assay quality

Wavelength range excitation: 250 – 850 nm Wavelength range emission: 360 – 850 nm Wavelength bandwid (more)th: 9 nm Dynamic range: 6 decades Sensitivity top read: 3 fmol/well FITC Detector: Photomultiplier tube Read types: endpoint, kinetic, spectrum scan, well scan Wavelength selection: Monochromator tunable in 1-nm increments Light source: Xenon flash lamp Read time: 15 seconds Dimensions (HxWxD): 340 x 420 x 420 mm Excluding software As-is

The Applied Biosystems QuantStudio 3 Real-Time PCR System is designed for users who need an affordab (more)le, easy-to-use real-time PCR system that doesn’t compromise performance and quality. The simplified Design and Analysis software is ideal for both first-time and experienced users. Using proven OptiFlex technology (featuring four coupled channels and white LED) and featuring three independent Veriflex temperature zones, the QuantStudio 3 system enables improved data accuracy and sensitivity for a broad range of genomic applications. Sample capacity: 96 wells Reaction volume: 0.1 mL block, 10–30 μL Excitation source: Bright white LED Optical detection: 4 coupled filters Excitation/detection range: 450–600 nm/500–640 nm Multiplexing: Up to 4 targets Maximum block ramp rate: 0.1 mL block, 9.0°C/sec Average sample ramp rate: 3.66°C/sec Temperature uniformity: 0.4°C Temperature accuracy: 0.25°C Compatible dyes: FAM/SYBR Green, VIC/JOE/HEX/TET, ABY/NED/TAMRA/Cy 3, JUN, ROX/Texas Red Security, auditing, and e-signature (SAE) features: No

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

The Agilent xCELLigence Real-Time Cell Analysis (RTCA) SP instrument uses label-free cellular impeda (more)nce to continuously monitor cell health, behavior, and function with high accuracy, sensitivity, and reproducibility. The SP model can run a 96-well electronic microplate (E-Plate 96), which is ideal for cell health characterization, immune cell-mediated killing, viral cytopathic effects, cytotoxicity, cell adhesion, cell barrier function (TEER), cell signaling (e.g., GPCR) and other related applications. xCELLigence RTCA SP model can run one 96-well plate Measure cell health, viability, or response to treatments with high sensitivity, accuracy, and reproducibility Obtain continuous data at high temporal resolution (from seconds to days), with non-invasive and label-free real-time impedance technology Easy workflow allows users to simply add cells to E-plates and begin kinetic measurements at physiological conditions, with minimal hands-on time Intuitive RTCA Software Pro allows for analysis of real-time data to generate diverse plot types and automatically calculate parameters such as % of cytolysis, IC50 or KT50 RTCA Software Pro supports FDA 21 CFR Part 11 compliance to ensure electronic data integrity

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Temperature range: Ambient +5°C to +70°C Capacity: 57 liters Dimensions (WxDxH): 750 x 610 x 550 mm  (more)Internal dimensions (WxDxH): 405 x 370 x 380 mm

Compact design Rotisserie and rocker in one unit Up and over door for accessibility Accurate tempera (more)ture control Advanced safety features Variable speed control The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over’ door mechanism gives excellent access to the incubator.

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

WAVE Bioreactor is the ideal device for cell culture. Culture medium and cells contact only a preste (more)rile, disposable chamber called a Cellbag that is placed on a special rocking platform. The rocking motion of this platform induces waves in the culture fluid. These waves provide mixing and oxygen transfer, resulting in a perfect environment for cell growth that can easily support 10 x 10-6 cells / ml. The bioreactor requires no cleaning or sterilization, providing the ultimate ease in operation and protection against cross-contamination.

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

Temperature range: Ambient +4°C to 50°C Temperature control increment: ±0.1°C Temperature stability  (more)at 37 °C: ±0.1°C Temperature uniformity: ±0.25 °C at 37 °C (in flask media) High temperature disinfection (HTD): 120 °C CO2 range: 0.2 to 20 % CO2 control increment: ±0.1 % CO2 stability at 5 % CO2: ±0.2 % CO2 uniformity: ±0.1 % Speed range: 25 to 400 rpm Available program modes: Constant speed and temperature Display: touchscreen interface Audible and visual alarms: yes Dimensions (WxDxH): 875 x 730 x 850 mm Capacity: 170 L Weight: 152 kg

Temperature range: 4 to 60°C Temperature setting: 0.1°C Temperature fluctuation: ≤ 0,2°C Temperature (more) variation: ≤ 0,5°C Airflow: 0.2 m/s Entry port Ø: 45 mm Volume: (2x) 225 L Internal dimensions (WxDxH): (2x) 635 x 600 x 605 mm Dimensions (WxDxH): 820 x 855 x 1960 mm Weight: 237 kg

The Countess 3 Automated Cell Counter is a benchtop cell counting system equipped with an advanced m (more)achine-learning algorithm, ruggedized optics, fully-automated focus and lighting, and image analysis software for rapid assessment of primary and immortalized cell samples. Capacity: 2 samples per slide Detection Method: Brightfield Memory: On Board, USB Drive Sample Type: Immortalized cell lines & primary cells For Use With (Application): Cell culture & analysis workflows For Use With (Equipment): EVOS microscopes, Attune flow cytometers Dimensions (LxWxH): 229 x 229 x 140 mm Weight: 3.6 kg

Interchangeable blocks with excellent thermal precision Broad (up to 30°C) and accurate temperature  (more)gradient Reliable and easy to use with low noise level Over-tightening protection system in the heated lid Accepts almost all standard PCR plastics Available Blocks: 2x TCA0384 Arktik Thermal Cycler 384 well block  3x TCA0096 Arktik Thermal Cycler 96 well block (WIT) (price / block) (Thermo Scientific Arktik Thermal Cycler is a reliable and flexible PCR instrument for the everyday requirements of any laboratory. Arktik Thermal Cycler is suitable for a wide range of applications from individual reactions to high-throughput projects. It offers flexibility with three different interchangeable blocks: 96-well block, 384-well block and a dual block with two 48-well units. A broad temperature gradient simplifies temperature optimization. It features an easy-to-use graphical interface for protocol setup and also offers preprogrammed protocols for maximum convenience.)

25 x CAMERA CDV 200 USB DV-1B (EU)

Power Supply power-phor-N Power Supply for Electrophoresis, 220 – 260 V, 10 – 500 V Output Range Vol (more)tage, 10 – 1000 mA Output Range Current, 200 W max. Output Range Wattage

LM2536 Mini Electroforesis Cell

High voltage power supply with constant voltage, constant current or constant power regulation mode.

Corning ACI oven / incubator

See attached document for more information.

The GeneAmp PCR System 2700 is an automated instrument, specifically designed for the amplification  (more)of nucleic acids using the GeneAmp Polymerase Chain Reaction (PCR) process. The instrument has an integrated 96-well sample block, which houses an internal Peltier heating/cooling unit. The sample block is made of aluminum to provide optimal thermal transfer rate. Long term stability and high reliability. The sample block accommodates several different types of MicroAmp disposable tubes and plates, which must be used in order to create a sealed chamber. Temperature range: 4 °C to 99.9 °C Accuracy: ±0.25 °C from 35 °C to 100 °C Dimensions (H x W x D): 215 x 210 x 350 mm Weight: 5.9 kg

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg

Heating block for 1.5/2.0 ml tubes at fixed temperatures of 60°C and 95°C.