Wesbart IS89 Multi Microplate Incubator Shaker 65°C 6-Place Inkubator Schüttler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has been extensively tested. It is in full working order. It is in good cosmetic condition with minor marks. This is the non-refrigerated model of this incubator.

Yamato IC-903CR General Purpose Incubator with Communication Port 567L, 115V Temperature Range Room (more) temp. +5 to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 567L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 567L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5-80°C INCLUDED: The Yamato IC-903CR General Purpose Incubator with Communication Port 567L, 115V includes: - 8 x Shelves w/ 16 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The equipment can be used for a wide array of quantitative imaging applications ranging from chemilu (more)minescence imaging, fluorescence imaging, gel, film and membrane imaging to culture and microplate-based assays. The equipment has an excellent image quality combined with an easy to use software features. It has a CCD camera with 1.92 Megapixel Resolution with a 12-bit Dynamic Range which is ideal for chemiluminescence, fluorescence and absorbance imaging. Including PC

Intravital Microscope System - Zeiss Examiner Z1 with Accessories & Software This is being sold  (more)on behalf of a client. It is surplus to requirements. The system is in full working order, and in excellent cosmetic condition with minor marks. There are a vast amount of accessories, extras and add ons included with this system. 1. VivoTM 100 Intravital Microscopy Workstation Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-positionnosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodtcontrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Alsoincludes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorizedx,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components. 2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM Working distance 2.5mm. 3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopesincludes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22) 4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters) for LED illumination, includes quad-band dichroic and quad-band emitter Photomanipulation Equipment - 5. Ablate!TM Photoablation System for Fixed Position Illumination 532nm pulsed laser, pulse energy 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM. 6. Ablate!TM Epi Mount Adapter for VIVOTM Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination.7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources transmits 532 laser, reflects visible wavelengths >90% 8. Support Kit for Ablate! 9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

OpenSPR-XT Unit And OpenSPR Unit OSPR4.0 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in good cosmetic condition. We are unable to test it further at our facility. THe system was serviced last year and was confirmed to be in good working order prior to removal. Includes the following; Dell LaptopNicoya spare parts kit (opened) OpenSPR-XT UnitModel- 840S/N-191015 OpenSPR UnitModel-OSPR4.0S/N-4-163 Dell LaptopModel-Latitude 3500S/N-5HRJLT2Manufactured Year-2019Includes:TraceDrawer softwareOpenSPR software (Needs Updating)

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz