ISLDMPHDG Microplate shaker with incubator Ohaus

Mini Portable Dry Bath Incubator Mix&Match Block Pad3-100c COYOTE New equipment in its original pack (more)aging Delivered without aluminum blocks Reference: Pad3-100c series chilling/heating dry baths accommodate half of the blocks of a H2O3 dry bath.The mini dry bath is very compact and economical,and it plays a role of all-in-one small box combining the functions of ice box,refrigerator,incubator,water bath,circulator,heater and etc.It works like a laptop,and is a perfect device"mate"for reagents. Temperature Range: 0-100ºC Display precision: 0.1ºC Temperature precision: ±0.2ºC Temperatureevenness: ±0.2ºC Average Heating Rate from 25ºC to 95ºC: 10 ºC/min Average Chilling Rate from 25ºC to 4ºC: 4ºC/min Operation ambient temperature: 8-30ºC Power Supply: 12V DC,5A Dimensions: 130×130×85mm Working area dimensions: 54×72 mm Net weight: 0.7kg

Heating block for 1.5/2.0 ml tubes at fixed temperatures of 60°C and 95°C.

This Panasonic MIR-554-PE Cooled Incubator was removed from a university lab where it was surplus to (more) requirements. The unit powers and incubates well, but has a faulty cooling system. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs Interior dimensions:D52cm x W64cm x H127cm

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator This was removed from a universit (more)y lab where it was surplus to requirements. The system is faulty and requires a new controller. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs.

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

Benchmark MyTemp Mini Digital Incubator With digital temperature control, the MyTemp incubators prov (more)ide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Despite a modest footprint of 14.5" x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation. INCLUDED: The Benchmark MyTemp Mini Digital Incubator includes: - Two Adjustable Shelves - Internal Outlet - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

ZWIEBEL calibration weight 100mg class F1 INOX Stainless steel laboratory calibration weight Brand:  (more)ZWIEBEL Weight: 100 mg Type / class: F1 maximum permissible error: ± 0.05mg Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its plastic box uncalibrated weight

This Olympus Motorized Reflector Turret  Model - I X2-RFACA was removed from a university lab w (more)here it was surplus to requirements. The unit has not been tested but it is in good cosmetic condition with some light usage marks.

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box Design  (more)Air Displacement Piston Operated Pipette Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit B Vario features mechanical air-cushion pipettes with variable volume ranges of 0.1-2 µl, 2-20 µl, and 20-200 µl, all manufactured in Germany. These pipettes undergo fully automated calibration by robots and include a volume-locking feature to prevent accidental volume changes. The large, clearly visible display and ergonomic, lightweight design ensure low pipetting and tip ejection forces, reducing strain and fatigue. Constructed with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable, ensuring sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 2-20 µl - IKA PETTE vario 20-200 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty