53k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Hamamatsu ORCA-FLASH4.0 V3 Digital CMOS Camera C13440-20CU

UsedHamamatsuMicroscopy equipment - otherUnited States

Price on request

In stock

Can't find what you're looking for?

Type number
C13440-20CU
Quantum efficency
82 % (peak QE: @560 nm)
Imaging device
sCMOS
Effective no. of pixels
2048 (H)×2048 (V)
Cell size
6.5 μm×6.5 μm
All 18 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 18

Brands
Hamamatsu
New/Used
Used
Type number
C13440-20CU
Quantum efficency
82 % (peak QE: @560 nm)
Imaging device
sCMOS
Effective no. of pixels
2048 (H)×2048 (V)
Cell size
6.5 μm×6.5 μm
Effective area
13.312 mm×13.312 mm
Full well capacity
30 000 electrons (typ.) *
Readout speed
100 frames/s (Full resolution, standard scan, Camera Link) *40 frames/s (Full resolution, standard scan, USB 3.0, 16 bit) *53 frames/s (Full resolution, standard scan, USB 3.0, 12 bit) *80 frames/s (Full resolution, standard scan, USB 3.0, 8 bit) *
Readout noise
Standard scan (at 100 frames/s, typ.):1.6 electrons rms (1.0 electrons median)Slow scan (at 30 frames/s, typ.): 1.4 electrons rms (0.8 electrons median)
Cooling method
Peltier cooling
Cooling temperature
Forced air (Ambient at +20 ℃): -10 ℃Water (+20 ℃): -10 ℃Water (+15 ℃): -30 ℃
Dark current
0.06 electrons/pixel/s (Air Cooled to -10° C) (typ.)0.06 electrons/pixel/s (Water Cooled to -10° C) (typ.)0.006 electrons/pixel/s (Water Cooled to -30° C) (typ.)
Dynamic range
37 000:1 (typ.)
Interface
Camera Link / USB 3.0
A/D converter
16 bit / 12 bit / 8 bit
Lens mount
C-mount

Product description

High-sensitivity sCMOS camera with 2048×2048 pixels, 100 fps, 82% QE, and Peltier cooling.

Hamamatsu ORCA-Flash4.0 V3 Digital CMOS Camera C13440-20CU

  • Imaging device: Scientific CMOS (sCMOS)
  • Effective pixels: 2048 (H) × 2048 (V)
  • Pixel size: 6.5 µm × 6.5 µm
  • Effective sensor area: 13.312 mm × 13.312 mm
  • Quantum efficiency: 82% peak at 560 nm
  • Full well capacity: Approx. 30,000 electrons
  • Readout speeds / frame rates:
  • 100 fps at full resolution, Camera Link interface
  • 40 fps (16-bit), 53 fps (12-bit), 80 fps (8-bit) via USB 3.0
  • Readout noise:
  • Standard scan at 100 fps: 1.6 electrons rms (median 1.0)
  • Slow scan at 30 fps: 1.4 electrons rms (median 0.8)
  • Cooling method: Peltier cooling with forced air or water cooling
  • Cooling performance:
  • Forced air: down to -10 °C at ambient +20 °C
  • Water cooling: down to -10 °C at +20 °C water; -30 °C at +15 °C water
  • Dark current:
  • Air cooled to -10 °C: 0.06 electrons/pixel/s
  • Water cooled to -10 °C: 0.06 electrons/pixel/s
  • Water cooled to -30 °C: 0.006 electrons/pixel/s
  • Dynamic range: Typically 37,000:1
  • Interface options: Camera Link and USB 3.0
  • Analog to digital conversion: 16-bit, 12-bit, and 8-bit modes
  • Lens mount: C-mount
  • Advanced features:
  • On-board FPGA for data reduction
  • Pixel-level calibration for quantitative accuracy
  • Patented lightsheet readout mode
  • Sophisticated triggering options for synchronization
  • PC requirements: Supports streaming 4-megapixel images at 100 fps; see Hamamatsu’s PC guidelines for high data-rate support

This camera system is designed for demanding scientific imaging applications requiring high speed, sensitivity, and quantitative accuracy.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 3 November 2026