Laboratory equipment

Thermo Scientific Revco ExF Freezer This item was removed from a laboratory where it was surplus to  (more)requirements. This item is in fair cosmetic condition. The unit does not power on and no further tests have been conducted. It is being sold as Spares/Repair.

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62 cm14 x Containers - 62 x 31 x 16 cm

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62cm14 x Containers - 62 x 31 x 16cm

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62cm14 x Containers - 62 x 31 x 16cm

Leitz MicroManipulator Lab This item was removed from a university where it was surplus to requireme (more)nt. The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

Nikon BioStation IM With Parts This system was removed from a university lab where it was surplus to (more) requirements. The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected. Therefore, this system is listed as Spares/Repair.

New Brunswick BioFlo/CelliGen 115 Fermentor Bioreactor Lab This item was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We were advised by the lab that they were not in working order, but we do not have details of the fault.

New Brunswick BioFlo/CelliGen 115 Fermentor Bioreactor Lab This item was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We were advised by the lab that they were not in working order, but we do not have details of the fault. Specifications:- Serial No.: B115BP201267 - Model: BF115-3978114

Bio-Rad UltraMark Microplate Imaging System This item was removed from a university where it was sur (more)plus to requirement. The unit powers up and is in good working order (thermometer not included).It is in fair cosmetic condition. No controller or additional equipment included to adjust the temperature. Model: Ultramark.

Thermo Scientific Heraeus CO2 Incubator This item was removed from a university laboratory where it  (more)was surplus to requirements. It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off. Therefore, it is listed as Spares/Repair. The incubator is in excellent cosmetic condition. Includes:- 3 shelves (47 x 43 cm) - Manuals - Sample holders Model: BB15Serial No.: 40998054Internal dimensions: D51 W47 H60 cm

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity laboratory where it was surplus to requirements. The item powers on and is in a reasonable used cosmetic condition.It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom. During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.Therefore, it is listed as Spares/Repair and no further testing was conducted. Specifications:- Model: U570 -86 - Serial No.: 1004-5204-1103

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator All items are in good cosmetic condition wit (more)h minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Wheaton 753680-2 Reach In Incubator This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

Forma Scientific 3952 CO2 Reach-In Laboratory Incubator This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has some issues revolving around it not reading the correct water level. It is sold for spares/repairs.

This was removed from a university lab where ti was surplus to requirements. The unit does not power (more) up. It is sold for spares/repairs.

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit. It is sold for Spares/repairs

This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good cosmetic condition. We are unable to test this item further at our facility.

Kendro HERAcell 150 CO2 Incubator This system was removed from a university lab where it was surplus (more) to requirements. The unit is in good working order and has been CO2 tested. It is in good cosmetic condition.

Paar DMA 35 Density Meter Kit Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. It was tested with a 9-volt 6LR61 test battery, this is not included in the sale. The kit consists of: 1 x Density meter1 x Sanitex Eternal-Matic 2ml filling syringe1 x Calibration screwdriver1 x Wrist strap1 x Original Hard plastic carry case

Varian HS 602 Two Stage Rotary Vane Vacuum Pump This item was removed from a university lab where it (more) was surplus to requirements. It is in very good cosmetic condition and powers on, we are unable to conduct further at our facility.

Agilent 6890 Series Plus GC (G1530A) Gas Chromatograph This item was removed from a university labor (more)atory where it was surplus to requirements. The item is in reasonably good cosmetic condition, with visible chemical reactions to the plastic on the top covers.It powered on and successfully conducted self-tests for ROM, RAM, signal path, and detectors. However, two error messages were displayed during operation:- Pneu Error 0158 - PCB Cmd Error 2003 "The pneumatics board, under the EPC modules, requires replacement." Due to the presence of both error codes, this item is listed as Spares/Repair. Specifications:- Model: 6890 Series Plus GC (G1530A) - Serial No.: US00036800 Please note - The screen displays a clear and steady image, though photos may appear distorted due to refresh rate.

New Brunswick BioFlo/CelliGen 115 Fermentor Bioreactor Lab This item was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We were advised by the lab that they were not in working order, but we do not have details of the fault. Specifications:- Serial No.: BF115BP601268 - Model: BF115-3957109

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Narishige Model-M0-203, Model-MMW-23, and Parts This item was removed from a university lab where it (more) was surplus to requirements. It is in good cosmetic condition; however, we are unable to test the functionality of the units. Included Models and Serial Numbers:- Narishige Model M0-203 Serial No.: 9306078- Narishige Model MMW-23 Serial No.: 96003

Hersteller: Sartorius  Modell: MSA6202S  Beschreibung: Die MSA-Anzeige- und Bedieneinheit eignet sic (more)h hervorragend zum Betrieb der Cubis Waage.e. Der Touchscreen und das hochauflösende Grafikdisplay bilden eine ideale Anzeige- und Bedieneinheit für höchste Ansprüche.Hierbei handelt es sich bei den Cubis MSA-Modellen um eine intelligente Warnfunktion, die jede Steigerung sofort erkennt.rkennt. Klare Anweisungen zur Einstellung auf dem Display helfen dem Benutzer bei der Nivellierung dDrei Standarddatenschnittstellen, Ethernet mit integrierten Webservices, USB-Schnittstelle zum PC und RS232C-Schnittstelle für Sartorius Zubeh, sorgen für eine perfekte Kommunikation.ör/Drucker. Bluetooth, neunpolige R232SC PC- und PS/2-Sc sind optionale Schnittstellen.Hnittstellen. Spannung 100 – 240 V, 50 – 60 Hz. B. ein AC-Adapter. Der eingebaute SD-Kartenleser ermöglicht es, Wägedaten, Anwenderprofile, Aufgabenkonfigurationen und Einstellungen von einer Waage auf eine andere oder einen Computer zu übertragen. - Schwenk- und abnehmbare Anzeige- und Bedieneinheit - Kompensiert exzentrische und außermittige Beladungsfehler - Windschutz mit Motor - Mit Passwortschutz - Prüfprotokollfunktion - GLP-konform - Optionale motorbetriebene Nivellierfunktion - Umrechnung von Masseneinheiten - Zeitgesteuerte Funktionen - Zweiter Tara-Speicher Technische Daten: Anschlusstyp: RS-232 25-polig / Bluetooth / RS-232 9-polig, inkl. PS Displaytyp: Hochauflösendes Farb-TFT für kontrastreiche Darstellung Format: Kilogramm Ausgleichen: Unterstützt Messzeit: ≤1 s Modell: MSA6202S Wiederholgenauigkeit: ≤±7 mg Temperaturbereich (metrisch): 5 bis 40 Grad Celsius Typ: Präzisionswaage Breite (metrisch): 193 mm Höhe (metrisch): 172 mm Tiefe (metrisch): 191 mm Elektrische Anforderungen: 100/240 V 50/60 Hz 1 A 7 w 15 VDC ±5% Wirkleistung: 7 W Frequenz: 50/60 Hz Ecklast: 20 mg Lesbarkeit: 10 mg Luftfeuchtigkeitsbereich: 50 bis 80 % RH Linearität: ≤±20 mg Min. Probengewicht: 10 g Bereich: –6200 g Stabilisierungszeit: 1 s Testlast: 2000 g Abmessungen (T x B x H): 191 x 193 x 172 mm Breite (metrisch) Schale: 206 mm Höhe (metrisch) Kammer: 172 mm Tiefe (metrisch) Schale: 206 mm Spannung: 100/240 V Stromstärke: 1 A Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: New Brunswick / Eppendorf / pbi Model: Innova 43 Incubator Shaker S/N: 59752 Descripti (more)on: The Innova 43 incubated and Innova 43R incubated and refrigerated shakers are the perfect choice for handling large quantities or large volumes of cultures with precision and ease. The cast iron triple-eccentric counterbalanced drive is specifically designed to support high-speed applications and heavy workloads. Features and Benefits - Console style shaker/incubator with triple-eccentric drive – provides large capacity shaking for flasks up to 6 L - Programmable Innova controls – automatically changes temperature, speed, and optional photosynthetic and UV germicidal lights at timed intervals - Top mounted controls and display – for easy, ergonomic viewing and setting - Foot pedal release with easy opening lid – provides hands-free operation - RS-232 port for data logging - Built-in water reservoir humidifies chamber to reduce sample evaporation while also protecting unit from spills and including a drain for easy cleaning Specifications: Temperature Range (Metric): 5°C Above Ambient to 80°C Net Weight (Metric): 209 kg Width (Metric) Exterior: 115.6 cm Type: Incubator Shaker Dimensions (LxWxH): 813 x 1156 x 1031 mm (45.5 x 20 x 40.6 in.) Speed Range: 25 to 300 rpm Orbit: 5.1 cm (2 in.) Timer: 0.01 to 99.59 Hr. (Continuous) For Flask Size: Up to 6 L Max Total Volume: 24000 ml Includes: Universal Platform Platform Style: Universal Items delivered: - New Brunswick Innova 43 Incubator Shaker - Universal Platform - 2x Vial Rack Holders - 4x 250 ml Flask Holders - 2 5000ml Flask Holder - 2 1000ml Flask Holders - Instruction Manual The Innova 43 Incubator Shaker is in excellent cosmetic condition and 100% functional tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW