Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Measurement range: 0°C – 100°C

Thermo Scientific Revco Elite Plus Freezer Ultra Low-Temperature ULT 2586 This was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power on, therefore, it cannot be tested, and it's sold as spares or repairs. It is in good cosmetic condition both internally and externally.

Sanyo Ultra Low Temperature Freezer MDF-U3086SBT ULT This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). The door seals were examined and found to be in poor condition, torn in places and need replaced. For this reason it is sold for spares/repairs. It is in good cosmetic condition both internally and externally. Equipped with a liquid CO2 backup system, this was not testedInner dimensions 51 x 50 x 112cm (w x d x h)

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 4 x Shelves - 71 x 69cm Model - Revco UXFModel no. UXF50086V63SN - 0132487401131018

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a NNP 50+100g Weight. The unit is in full working condition and is ready for im (more)midate realese.

Memmert U30 drying and sterilisation oven. Capacity 45 L. Ambient temperature range +10 ºC to 220 ºC (more). Analogue temperature display (°C). Two power levels. Natural air circulation. Internal ventilation on 6 levels. Timer up to 120 min. Aluminium interior. Includes a perforated tray. Safety temperature limiter. Dimensions: internal 37*33*37 cm; external 52*55*68 cm. User manual not available. Introducing the Memmert U30 drying and sterilisation oven at Galileo Equipos! Perfect for laboratories looking for efficiency and precision, this oven stands out for its 45-litre capacity and a temperature range of up to 220 ºC. Ideal for drying and sterilisation, it offers optimal results thanks to its robust design and natural air circulation. With an integrated timer and temperature limiter, it ensures maximum safety in your processes. Take advantage of this excellent option with an unbeatable quality/price ratio. Buy now at Galileo Equipos and equip your laboratory with the best!

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series The Hermle 24 x 1.5/2.0ml rotor is (more) a hermetically sealed rotor designed for use with the Hermle Z216 series centrifuge. With a maximum speed of 15,000 RPM and a maximum RCF of 21,379 x g, this rotor can accommodate up to 24 1.5/2.0ml tubes at a 45° angle. The hermetically sealed design of the rotor ensures that samples are protected from contamination during centrifugation, making it an ideal choice for applications where sample purity is critical. INCLUDED: The Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Unimax 1010 Orbital Platform Shaker This shaker can be integrated into the modular incubati (more)on system, and it is therefore ideal for all temperature-controlled shaking tasks. In addition, it is possible to operate several shakers of this size in one climate chamber. We recommend climate chambers made by Memmert. With a speed range of 30-500 rpm and an orbit of 10 mm, samples are optimally kept in motion. Time-dependent applications can be performed without any problems by using the timer (max. 999 min). Click Here to View Product Video INCLUDED: The Heidolph Unimax 1010 Orbital Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty