Skan Skanair HFC 950 Safety Workbench

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Vacuum systems are widely used for the aspiration and disposal of liquid waste, for instance, when r (more)emoving media from cell cultures, supernatant after centrifugation, and wash solutions from immunoassay well plates. The aspiration of waste liquids is a routine yet time-consuming task. The user-friendly VACUSAFE system streamlines this repetitive workflow, freeing up lab personnel to perform other vital tasks. It also provides a secure alternative to do-it-yourself liquid waste disposal systems typically found in laboratories, protecting operators from exposure to liquids and aerosols for a safer working environment. The system additionally features optional liquid level detection to prevent overfilling, and a filter to protect the vacuum source from contamination. Vacuum range: -300 to -600 mbar (adjustable) Pump flow rate: 8 l/min (air) Liquid aspiration rate: 17 ml/s (aspiration pipet) Noise emission: <50 dB(A) at 1 m Dimensions (HxWxD): 530 x 180 x 320 mm Weight: 3.4 kg

Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002 The Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002  (more)are for use with the Eppendorf S-4-104, S-4x750, and S-4x1000 Rotors. These adapters feature a capacity for 7 x 50ml conical tubes each with the maximum tube dimensions (Diameter x Height) of 30mm x 116mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 7 x 50ml Adapters, Cat. #: 5825733002 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4-104, S-4x750, and S-4x1000 Swing Bucket Rotors

This Leica Microscope Micromanipulator was removed from a university lab where it was surplus to req (more)uirements.Serial#: 078813 The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System Gel Dimensions (W x L) 12.5 x 13.0 cm  (more) Maximum Sample Capacity 112 samples (4 combs, 28 samples each) Max. Power Settings 150 volts, 400 mA, and 45 watts Features - Compact and Easy to Use - Built-in Variable Power Supply with LED Display - Adjustable Power Supply from10 to 400 mA or 10 to 150 Volts - Built-in Timer with Audible Alert - Supports multichannel pipette-compatible combs for efficient loading and increased sample capacity - Durable construction with UV-transmitting material - Vented lid reduces condensation buildup - Automatically recalls the last-used voltage and time for faster setup on repeat runs The Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System is a compact, user-friendly solution for high-throughput nucleic acid separation. Featuring a built-in variable power supply with an LED display, this system provides clear visibility of voltage, amperage, and time, allowing precise control over every run. With an adjustable power range of 10 to 400 mA or 10 to 150 volts, the HE-PLUS is versatile enough for a wide range of applications. The integrated timer with a 99-hour, 59-minute limit and audible alert ensures efficient workflow management. Designed for high efficiency, the HE-PLUS supports a 96-well format compatible with multichannel pipettes, making sample loading fast and accurate. Its durable polycarbonate tank and UV-transmitting construction allow clear monitoring throughout the run, while a vented lid reduces condensation. Safety is prioritized with a microsensor that prevents operation without the safety lid in place. Additional features like the memory function for last-used settings make it easy to set up repeat runs, ensuring consistent results with minimal prep time. INCLUDED: The Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System includes: - Gel tank - Safety lid - Power supply - Large gel tray - Medium gel trays, 2 pieces - Large/medium comb 14/28 wells, 4 pieces - Casting stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7&quot; colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company&#39;s branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

KIT 195 is a density determination kit intended for laboratory balances featuring 195x195 weighing p (more)an. This stainless steel accessory allows determining density of: solids, liquids. For testing granulates of density value higher or lower than 1 g/cm3 use KIT 85.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.