Laboratory equipment

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation. It is in good cosmetic condition with minor marks from use. 3 Shelves - 52 x 42.5cm

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in full working order. The teaching head can be easily removed and it can be used as a standalone microscope. It is in good cosmetic condition but has some marks from use. The unit is made up of the following modules. 1 x Objective (Carl Zeiss, Plan 6,3/0.16. 160/-, 5188712)2 x Sets of eye pieces (Leis Wetzlar Germany, 519748. Periplan 10x/18)1 x Condenser (513547)1 x Main Head (512582)1 x Teaching Head (512662)1 X Body (512792)

This Cole-Parmer BRAND PLT Pipette Leak Testing Unit was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but the backlight is not working, though it is still readable. We did not have the facility to test this unit further. The item comes in a case with a power supply, accessories and manuals. It is in good cosmetic condition.

Perkin Elmer C6 Chiller This was removed from a university lab where it was surplus to requirements. (more) The unit powers up but we were unable to test tit further. It is in good cosmetic condition with minor marks from use.

2 x Becton-Dickinson Remote Pre Amp - BD Biosciences LSR II Boards These were removed from a univers (more)ity lab where they were surplus to requirements. They are in good cosmetic condition but have not been tested.

This Skalar San+ Segmented Flow Wet Chemistry Autoanalyser System was removed from a university lab  (more)where it was surplus to requirements. Everything powers up but has not been tested as a system as there is no PC or software. Everything is packed in black flight cases. The system consists of: Skalar San+ Segmented Flow AutoanalyserType - 4000 Skalar SamplerType - 1000 Skalar InterfaceType - 8503 Skalar Temp Control UnitType - 5540 Skalar ReactorType 5521 HP Deskjet 940C Printer There is one box that contains the following Skalen parts/tubing (listed by part number)2 x 262009031 x Astro D-27607 Langen1 x Cogwheel - 223000121 x Spring 6 Pack - 223003174 x Cogwheels for Motor - 223000451 x Rollercage for SA2100 Pump - 223003121 x Motor for SA4000 - 90020766Tubing (Mix of sealed/opened packs):-1 x 51551 x 51501 x 31421 x 31502 x 51411 x 51304 x 10602 x 30242 x 30256 x 30261 x 30273 x 30287 x 30294 x 30304 x 30315 x 30324 x 30331 x 30344 x 30351 x 3036 There another box that contains the following Skalen parts (listed by part number)1 x Start up kit 57038 x 53231 x 10111 x 53131 x 10111 x 52611 x 52161 x 52601 x 92212 x 53255 x 53246 x 52028 x 5210

This Skalar San+ Segmented Flow Wet Chemistry Autoanalyser System was removed from a university lab  (more)where it was surplus to requirements. Everything powers up but has not been tested as a system as there is no PC or software. Everything is packed in black flight cases. The system consists of: Skalar San+ Segmented Flow AutoanalyserType - 4000The unit appears to be fixed to the bottom half of the flight box Skalar SamplerType - 1000 Skalar InterfaceType - 8503 Skalar ReactorType 5521 HP Deskjet 930C Printer There is one box that contains the following Skalar parts/tubing (listed by part number)1 x Skalar type - 26200903 - SN- 002471 x Start up kit 57038 x 52104 x 53246 x 52021 x 53251 x 52611 x 1011 Tubing (Mix of sealed/opened packs):-1 x 51501 x 31421 x 31501 x 51411 x 51303 x 10601 x 30241 x 30255 x 30261 x 30273 x 30286 x 30293 x 30304 x 30314 x 30323 x 30333 x 30351 x 3036

6 x Calibration Weights Mettler Toledo, Fisherbrand & Troemner 100g,200g,1kg These were removed  (more)from a working lab where they were surplus to requirements. All are in good cosmetic condition with minor marks. Included are Mettler Toledo F2 100gSerial#: B128168752 Mettler Toledo F1 200gSerial#: 132554 Troemner 200gSerial#: 76359 Fisherbrand F1 1kgSerial#: 06-J14833-12 Mettler Toledo F2 1kgSerial#: B128168753 Mettler Toledo F1 1kgSerial#: 158691

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

LEEC F1 Glassware Drying Cabinet Warming Oven Lab This item was removed from a university where it w (more)as surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition.

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requi (more)rements. The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1 The item is in good cosmetic condition but has marks and stains from use.

This Jenway 6505 UV/Vis Spectrophotometer was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but it does not have an application card. It was professionally serviced using a card from another unit (not included). Instrument passed calibration testsWavelength Calibration Tests - PASSPhotometric Calibration Tests - PASSStray Light Checks - PASS It is in reasonably good cosmetic condition with some marks from use.

Wentworth Laboratories Model AVT701 Vibration Isolation Table This was removed from a university la (more)b where it was surplus to requirements. It is in reasonably good cosmetic condition but has marks from use. It has not been tested. Plate on top dimensions - 68 x 49.5cm Whole table dimensions - 90x63x75cm LWH

ELMI Sky Line Digital Orbital Rocking Shaker Rocker S-4 Lab This item was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and in good working order. The power supply is not included.

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200176_5P-Pump serial number- 4901379 Sensor serial number- 1600878

This Canon Legria HFG40 HD Camcorder was removed from a university lab where it was surplus to requi (more)rements. It is in very good cosmetic condition and in full working order. Includes; Canon VIXIA HF G40 Full HD Camcorder BP-820 Lithium-Ion Battery Pack (1780mAh) CA-570 Compact AC Power Adapter WL-D89 Wireless Controller STV-250N Stereo Video Cable HTC-100/S High Speed HDMI Cable IFC-300PCU/S USB Interface Cable Lens Hood (with Lens Barrier) CR2025 Battery Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

Envair Bio 2+ Class 2 Microbiological Safety Cabinet This was removed from a laboratory where it was (more) surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Internal dimensions:Dx55 Wx106 Hx70cm

Jasco PU-1580 Intelligent HPLC Pump And TP Cell Unit Lab These items were removed from a university  (more)lab where they were surplus to requirement. Both items are in reasonably good cosmetic condition and power on, we are unable to test them further at our facility.

Statebourne Bio 35 Nitrogen Dewar This item was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition. We are unable to test it at our facility. Includes:- 6 x Metal Cylinders Double walled vacuum vessel.

GT 38 Liquid Nitrogen Dewar with Storage Racks This item was removed from a university lab where it  (more)was surplus to requirements. It is in good cosmetic condition. We are unable to test it at our facility. Includes:- 6 x Metal Cylinders

This Solartron Mobrey 1286 Electrochemical Interface was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has marks from age and use.

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab  (more)where it was surplus to requirements. The unit has not been tested but is in reasonably good cosmetic condition with some marks from use. Size not taking into account the shape - L45 X W60 X H7.5cm

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This ELE Paqualab 25 Portable Incubator with Accessories was removed from a university lab where it  (more)was surplus to requirements. The ELE Paqualab 25 includes a universal incubator with 2 pre-set temperatures (normally 37°C and 44°C), a membrane filtration kit, connecting cables and operating manual. All components are housed in a convenient rigid carrying case which can also accommodate a number of electronic meters from the ELE Paqualab range. The unit is in good cosmetic condition with some light marks from use. It is housed in a travel case along with the accessories. The case is in good cosmetic condition. The unit powers up and seems to be in working order. There is a rocker switch on the unit that can be set to 37ºC and 44ºC it was tested with a digital thermometer (not included).Set at 37ºC our thermometer read 37.2˚CSet at 44ºC our thermometer read 44.1˚C Accessories:25x pairs of Aluminium Petri Dishes1x sample stand1x dual Crocodile clip lead (red/black)2x plastic bottles of Gelman Filtration products (Filters) 1x plastic bottle of m-Lauryl Sulphate Broth 1x 38.1g Batch No. 2243181x Gelman performance and spec sheet1x Gleman plastic widget 1x open box of Gelman GN-6 Grid 47mm sterilised membranes(box contents not counted)  1x 300ml Aluminium vessel (gold in colour)1x 200ml Aluminium vessel (silver in colour)1x Aluminium Cartridge1x sealed 50ml tube of Multipurpose Grease 556-4461x sealed bag Magnifying Glass7017A0001 1x 110mm cover slip forceps L325/011x 12v plug adaptor4x 60ml empty plastic bottles w/ lids

These were removed from a university lab where they were surplus to requirements. Pallet of 13 Boxes (more):-Supercon Disposable Deep Well Plates (96 Well) with Barcode labels (2.2mL)Qty - 10 x 10 per boxCat no. SDP0096B All boxes are sealed.

This Sanyo MIR-262 Laboratory Incubator was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 3 Shelves - 57 x 48cm

Jeol JEM-1200 EX Pump and Pressure Tank This was removed from a university lab where it was surplus  (more)to requirements. The unit has not been tested. It is in good cosmetic condition with marks from use.

This Jenway 6505 UV/Vis Spectrophotometer was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but it does not have an application card. It was professionally serviced using a card from another unit (not included). Instrument checked as per report. All tests passed fineWavelength Test using Holmium and Didymium - PASSPhotometric Accuracy at 546nm - PASSStray Light Test - PASS It is in reasonably good cosmetic condition with some marks from use.

This AEI Technologies Carbon Dioxide Analyser & Sensor was removed from a university lab where i (more)t was surplus to requirements. Included are; Carbon Dioxide AnalyzerModel - CD-3A Carbon Dioxide SensorModel - P-61B The item powers on, connecting together with the cable. We were unable to test it further. The item is in a reasonable, used cosmetic condition. It is supplied with the original packaging.