Laboratory equipment

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Brand: Liebherr Suitable for drawer system: Included Temperature: -20/30°C Type: Freezer Freezer app (more)lication: Explosion proof (ATEX114) Volume: 310 liters Cooling: Static Transit: Yes Min. Temperature: -30 Max. Temperature: -9

Temperature Range: Ambient +5°C to 105°C Temperature Stability: ±0.1°C Temperature Uniformity: ±0.6° (more)C Timer: weekly/real time/hour Capacity: 178 L Convection Technology: Dual convection No. of Shelves: 2 supplied/19 max. Interior Dimensions (DxWxH): 543 x 464 x 708 mm Dimensions (LxWxH): 738 x 640 x 920 mm Weight: 70 kg

The EM series mantle is made with extreme care and is hand sewn to assure its reliability, quality a (more)nd safety. Maximum heat transfer to the sample is achieved by having excellent insulation around the cartridge and good flask coverage. Designed with flexibility and ease of use in mind, the EM series heating mantle is a reliable workhorse for your heating applications in the laboratory. All EM Electromantles have a built-in energy regulator with indicator lamps for power and heater operation. All mantles have support rod clamps as an integral feature and incorporate a grounded earth screen and double fuses for added safety. The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar is seldom lost due to our “auto-recapture” function. Flask capacity: 1000 ml Material: Polypropylene outer case Max element temperature: 450°C Dimensions (DxWxH): 310 x 238 x 157 mm Weight: 2.75 kg

Vinitex Door cabinet high RT White 450

Capacity: 3100 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.02 g Dimensions (WxDxH):  (more)245 x 321 x 89 mm Weighing pan dimensions: ø 180 mm Weight: 3.6 kg

A glove box is a hermetically sealed enclosure. It provides a working space in its inner side that i (more)s completely segregated from the outside. As an inert gas glove box it is designed to maintain in it’s inside an artificial atmosphere, typically consisting of pure nitrogen or pure argon with a concentration of oxygen and water vapour typically below 1 ppm. It is used to protect the product, which is handled inside the box from the outside, in particular from unwanted reaction with oxygen and/or water vapour (product protection).

Minimum temperature: -10˚C Temperature resolution: ±0.1˚C Pump type: Turbine Compressor: 1HP Heating (more): No (refrigeration only) Flow rate: 11 L/min Pump pressure: up to 5 bar Reservoir capacity: 4.2 L Cooling capacity: 2.7kW (at 20˚C) Dimensions (LxWxH): 370 x 700 x 580 mm Weight: 90 kg

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

Motion: reciprocating Rotation speed range: 30 – 250 rpm Operating Mode: timer or continuous Orbit / (more) Stroke: 32 mm Timer: yes (max. 999 min) Platform size: 290 x 258 mm Max. Load: 5 kg

Max stirring quantity (H2O): 0.25 l Maximun load: 0.5 kg Speed range: 500 – 1800 rpm Max stirring ba (more)r length: 30 mm Set-up plate material: synthetic (PP) Set-up plate dimensions: Ø 80 mm Dimensions (WxHxD): 140 x 42 x 140 mm Weight: 0.747 kg

Compatible with J series balances

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

M1 Mass Standard - knob weights - set (1 mg - 100 g), plastic box.

M1 Mass Standard - knob weights - set (1 mg - 5 kg), wooden box.

DWM HPE is a combination of a checkweigher system and a labelling system, designed for weighing and  (more)marking of products of variable weight. These parameters speak for themselves: Maximum capacity: 7,5 kg Readability [d]: 1 g Throughput: up to 60 pcs./min You See Everything Even From a Distance The device has been equipped with 12-inch, colour screen and a touch pannel. It can be programmed either using a terminal or remotely, with the Label Editor and E2R Checkweigher software run. Go for the solution which you find more convenient. And you design the labels from the Label Editor. Apply the Labels the Way You Like You can adjust the label application system to particular requirements of the production process of yours (application from the top, application from the side). To meet the most demanding requirements, we can apply tamp or blow label applicators mounted on the actuator or the rotary arm. Should you need to use metal detection and rejection systems, we can equip the device with them – its modular design allows that. You Want to Know What For You Need It? Well, the answer is this: mainly for industry. The DWM labelling checkweighers are intended for industry since it requires pre-packaged products of variable weight to be marked with labels including price. Our devices’ functions are as follows: Constant-weight product labelling, Variable-weight product labelling, Single/ bulk/ pallet label printing, Product sorting, Contamination check-ups, Weighed product record, Freely configurable report module. Plus, They Conform to Worldwide Standards The DWM labelling checkweighers have type approval accordant with MID directive and are tested in accordance with OIML R51 reccomendations. The software enables creation and printout of any labels, also those that include product price. Software Tools Label Editor R02 E2R Checkweigher

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-9 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), ETHERNET IP. It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

A Simple Western size assay is an automated Western – no gels, no transfer devices, no blots, no fil (more)m and no manual analysis. Simple Westerns take place in a capillary. Wes automates all steps of the process for you including sample loading, protein separation, immunoprobing or labeling, washing, detection and data analysis. Up to 25 samples can be processed in a single run. Wes performs Simple Western size-based assays: Immunoassay and Total Protein assay. All you have to do is pipette your samples and immunoreagents into Wes’s pre-filled plate, load the capillary cartridge and press start. Sample Required Total Protein: 0.3-1.2 µg lysate Sample Required Immunoassay Charge: 0.6-1.2 µg Volume Required Total Protein: 3 µL/well Volume Required Immunoassay Charge: 3 µL/well Size or pI Range Total Protein: Molecular weight (MW) ladders range from 2-440 kDa Size or pI Range Immunoassay Charge: Molecular weight (MW) ladders range from 2-440 kDa Sizing CV Total Protein: <10% Sizing CV Immunoassay Charge: <10% Intra-assay CV Total Protein: <15% Intra-assay CV Immunoassay Charge: <15% Resolution (± percent difference in MW) Total Protein: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Resolution (± percent difference in MW) Immunoassay Charge: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Quantitation CV Total Protein: <20% Quantitation CV Immunoassay Charge: <20% Dynamic Range Total Protein: 2-3 logs Dynamic Range Immunoassay Charge: 3 logs Sensitivity Total Protein: ng Sensitivity Immunoassay Charge: Low pg Capillary: 5 cm, 100 µm, 400 nL Dimensions (HxWxD): 360 x 360 x 570 mm Weight: 23 kg

AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal tur (more)bine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety). Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 biological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general.

OMNI GLH-220 homogenizer. Motor 700 watts with variable  speed control from 5,000 to 28,000 rpm. It  (more)has a processing range of 0.20 mL to 10 liters. Includes base stand. Generator probes are not included but can be ordered independently. Compatible with 5, 7, 10, 20, 32 and 35 mm diameter stainless steel generator probes (see pictures on the left to find the model that best suits your needs). The OMNI GLH-220 Homogenizer is a high-power device with a 700-watt motor and variable speed control from 5,000 to 28,000 rpm. which allows obtaining precise and efficient results in the homogenization of samples This homogenizer offers a wide processing range, from 0.20 ml to 10 liters, making it suitable for a variety of applications. In addition, it has a compact and ergonomic design that makes it easy to use and manipulate. Whether for sample preparation in research laboratories or industrial applications, the OMNI GLH-220 homogenizer is a reliable and versatile choice.

Hygiena Digital Dry Block Mini Incubator.  Rango de temperatura de ambiente + 5ºC a 80 ºC. Stability (more) ±0,5 ºC. Heats to max temp in less than 15 minutes. Volumetric capacity of small tube incubator blocks = 1,5mL. Timer range: 1 min - 99 hr 59 min .Small Format (WxDxH): 11*15*8 cm; 0,5 kg Designed specifically for Hygiens'a wide variety of test devices.

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply,&nbsp;Serial No: 9001305 008,&nbsp;Model No: SDS400-3628-1,&nbsp;SSI P/N: 20-0049-015N - Multifan 4394,&nbsp;GB-PAT: 2133082 2075288,&nbsp;ASSY by PAPST in Hungary&nbsp; &nbsp;- Dynode&nbsp;FINNIGAN P/N: 97000-98042 REV-C &nbsp;- Aux valve&nbsp;TYPE: DEMB3628028,&nbsp;S/N: 237085000104 &nbsp;- 5kV power supply&nbsp;97000 10070C &nbsp;- Ion Gauge&nbsp; &nbsp;- LED front panel + 4 screws&nbsp;ASSY No: 97000-61400 REV-C &nbsp;- Vent Delay PCB panel&nbsp;ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs