Laboratory equipment

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (± 3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg

The Nucleofector technology is a major improvement of the well known electroporation technology. The (more) Nucleofector technology involves a combination of optimized electrical parameters and specific Nucleofector solutions for different cell types. This combination permits the crucials step: delivery of the DNA of interest straight into the nucleus. As the DNA quickly reaches the nucleus, expression can begin without delay. The nucleofected cells are thus ready for analysis after a short incubation time of only 2 – 8 hours. DNA quality: 1 – 5 µg plasmid concentration per nuclefection sample (100 µl), plasmid concentration can be increased up to 10 µg per sample. This may lead to higher gene transfer efficiencies, but at the same time may increase mortality of the cells. Cell density: 2 x 105 – 1 x 107 cells per nuclefection sample for suspensions cells 2 x 105 – 2 x 106 cells per sample for adherent cells Cell densities of < 2 x 105 cells per smaple are not advisable beacause the gene transfer efficiency may decrease and mortality may increase. Dimensions (WxDxH): 300 x 230 x x110 mm Weight: 2.5 kg

Dimensions (HxWxD): 1841 x 660 x 683 mm Internal dimensions drawer (HxWxD): 190 x 465 x 400 mm Capac (more)ity: 305 L

Return Linear Stainer Model RLS 1800

Dimensions (WxHxD): 600 x 600 x 580 mm

Epsilon 3XLE is a benchtop energy dispersive X-ray fluorescence (EDXRF) spectrometer that is used fo (more)r elemental analysis from carbon (C) to americium (Am) in areas from R&D through to process control. Easy to operate, reliable and highly flexible, it is ideally suited to a broad range of industries and applications. The instrument is powered by the latest advances in excitation and detection technology, delivering excellent analytical performance. The SDDUltra silicon drift detector fitted in Epsilon 3XLE enables ultra light element analysis of even carbon, nitrogen and oxygen. Excluding software

The Rheodyne LabPro Switching Valve, Model PR700-100-01 is a stainless steel switching valve, rated  (more)at 345 Bar (5000 psi). Suggested applications include sample enrichment, column backflushing, column selection, pre-column backflushing, sample stripping, simultaneous injection with two sample loops, alternating column regeneration, and combined injection and sample enrichment. Features: Automates on-line sample enrichment, stripping, and backflushing for decreased total analysis time Automates two column selection Automates multi-dimensional chromatography for simultaneous sample clean-up and analysis Automates sample injection 1 or 2 line TTL level or pulse logic Two-position module electronically automates all your injecting and switching needs to boost productivity. No valve head included Dimensions (HxWxD): 110 x 65 x 255 mm Weight: 2kg

Never used, new in Box Stuart SM4 Mini Magnetic Stirrer With fitting for retort rod Compact and ligh (more)tweight With fitting for retort rod Speed range: 80 to 1300 rpm Max capacity : 1 L Overall dimensions (wxdxh) : 90 x 160 x 90 mm Net weight: 1kg 230 V | 3,15 A | 50 Hz | 50 W Never used, new in Box

The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damag (more)e either to the seals, pistons, or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors. The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds. Limit values for the commercially available single- and multichannel pipettes in the volume range 1 μl to 10 ml are pre-programmed. Testing with and without tips Test results in seconds While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected! Process reliability for the pipettes is thus significantly improved.

The IL1700 Research Radiometer combined with International Light standard detectors, filters and inp (more)ut optics, this system provides a choice of over 200 different spectral and spatial measurement capabilities. Measurement Range: 0.2 picoAmps to 200 milliAmps (Optical units will depend on sensor selection). Minimum display resolution is 0.01x10-11 Amps. Linearity: ±0.1%, ±1 digit on the top of measurement range and ±0.2%, ±1 digit on the bottom Refresh Rate: 2 readings/second Size: 90 x 220 x 240 mm) Weight: 2.3 kg

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

Alpha unit block assembly for DNA Engine systems. Capacity: 96 x 0.2 ml tubes, one 96-well plate.

Alpha unit block assembly for DNA Engine systems. Capacity: 96 x 0.2 ml tubes, one 96-well plate.

The SilentAire Super Silent 20-A Compressor is virtually soundless and is a totally automatic compre (more)ssor with a tank pressure gauge, line pressure gauge, line pressure regulator, moisture trap/filter, safety/bleeder-valve, air-intake filter, on/off switch and a handle for balanced carrying. It includes a 0.4 gallon tank, 1/5 HP motor, offers 0.70 CFM free air with an automatic pressure switch for start-up and shut-off, factory preset at 55 PSI (on) and 85 PSI (off), but this can be adjusted for individual needs.

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg Required software and/or control unit not included

Temperature range: 0°C to ambient Temperature can be set individually per compartment Dimensions (Hx (more)WxD): 2000 x 765 x 855 mm Internal dimensions compartments (HxBxD): 600 x 530 x 630 mm

Temperature range: 2°C to 12°C Content: 600 ltr Dimensions (WxDxH): 815 x 755 x 2160 mm Weight: 130  (more)kg

Dimensions (HxWxD): 1705 x 750 x 750 mm Internal dimensions (HxWxD): 1510 x 650 x 500 mm Capacity: 5 (more)62 liters

Short cleaning times through ultrasonic cleaning – no time-consuming washing. The device is also sui (more)table for plastic pipettes, burettes and other glass devices. Timer: 1, 2, 3, 4, 5, 10, 15, 30 min. and endless. Useful depth: 850 mm Filling quantity: min 9 litres, max 18 litres Internal dimensions (LxWxH): 150 x 150 x 895 mm External dimensions (LxWxH): 330 x 330 x 1003 mm Weight: 19.5 kg

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

F1 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device&#39;s high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal&#39;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition, with minor marks from use. The sample plate is not included. Further testing is not possible without the necessary PC and Software.

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

Refrigerated storage cabinet / refrigerator FRIGINOX G1 R290 650 liters Model: G1 R290 4 shelves Vol (more)ume: 650 liters Power: 290W Ventilated defrosting Temperature: from 0 to +10 ° C Approximate dimensions: 835 x 740 x 2090mm Useful internal dimensions: 650 x 530 x 1385mm With 4 adjustable feet Weight: 125Kg Year of manufacture: 2022 In excellent condition Equipment tested at 4 ° C

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 Oxygen Probe OD Accuracy: ±0.5% OD Concentrati (more)on: 0.00 - 20.00 / 0 - 90 mg/L Dissolved Oxygen - Saturation: 0.0 - 200.0 / 0 - 600 % (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature Range: 0.0...+50.0 °C Temperature Accuracy: ±0.1 °C Power Supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode / 5000 in automatic mode In good condition