Accuris PR2122-N-25BLK qMAX Multiplex One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml)

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

Bio-Rad C1000 Touch Thermal Cycler + CFX96 Real-Time System This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It is in excellent cosmetic condition with minor marks from use. Included with it are; C1000 Touch Thermal Cycler Quick GuideC1000 Touch Thermal Cycler Instruction ManualCFX96 AND CFX384 Real-Time PCR Detection Systems Instruction manual

Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V Display 10” full co (more)lor touch screen with adjustable angle Block Temperature Range 4°C - 99.9°C Temperature Accuracy ≤ ± 0.2°C (at 90°C) Features - Dual block format - All accept 0.2 mL PCR tubes and strips, flat or dome caps - Each block functions independently - Block temperature range: 4°C - 99.9°C; Lid temperature range: 30 - 112°C - Intuitive Touch Screen Control - Large 10-inch adjustable touch screen - folds away when not in use - Program wizard for fast and easy programming - Advanced program features - Gradient capabilities - up to 8 temperatures per block Designed for laboratories wanting flexibility in their applications, Benchmark’s MultiCycler™ Thermal Cyclers offer multiple, independent cycling blocks in a single unit. Dual or triple block models are available, both offering extremely fast cycling profiles, large touch screen interfaces, self-adjusting heated lids, gradient capabilities, and an easy-to-use program wizard. All programming features are accessed from the large, 10” full color touch screen. The screen can be angled towards the user when in use and then tucked away to save space. A program wizard guides users through the simple protocol set up process. Advanced programming features include gradient, adjustable ramp rates, and time increments and decrements. For multi-user labs, password protection prevents interference of an existing run. A USB provides for unlimited program storage and easy transfer of protocols between MultiCycler machines. The auto-adjusting heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. Peltier units allow for exceptionally fast heating and cooling of the blocks. Temperature change is precisely and accurately controlled within tight tolerances by a proprietary algorithm that simulates sample temperature, resulting in fast runs and reproducible results. The wells are arranged in a 4×8 and 6×8 format, allowing for the use of PCR strip tubes in both models. Each block is independently controlled. INCLUDED: The Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V includes: - Power Cord - Two Year Manufacturer's Warranty

Capacity: 310 g Readability: 0.001 g Repeatability: 0.001 g Linearity: 0.002 g Response time:  2 s P (more)an size: 100 mm Weighing chamber height: 141 mm Dimensions (WxDxH): 245 x 321 x 236 mm Weight: 4.9 kg

Speed: 100 to 14680 rpm (50 rpm increments) RCF: 1 to 20238 x g (50 x g increments) Run time: 30s to (more) 9:59 h, infinitely (0.5 min increments up to 10 min, thereafter in 1 min increments) Dimensions (WxDxH): 236 x 320 x 227 mm Weight: 13.4 kg Equipped with: 1x Eppendorf FA-45-24-11 biocontainment lid 1x Eppendorf FA-45-24-11 fixed angle rotor (max 15000 rpm; 24x 1.5 mL/2.0 mL micro test tube capacity)

Ohaus VXMTDGB Multi-Tube Vortex Mixer Speed Range 1200 - 2400 rpm Capacity 4.5 kg Orbit 3.6 mm Feat (more)ures - High Capacity: Easily process up to 50 samples at one time with the Multi-Tube Vortex Mixer, customizable with six different tube racks and a post-extension kit. - Versatile Housing Options: Choose between an easy-to-clean, one-piece stainless steel housing ideal for clean rooms, or a more economical painted steel version. - Programmable Pulse Mode: Enhance vortex action for challenging samples with the digital model's programmable pulse mode, allowing you to adjust the pulse-on/pulse-off time interval. - Applications: Ideal for suspensions, genotyping, and high-throughput DNA and RNA testing in clinical labs. - Independent LED Displays: Digital models feature independent LED displays for speed and time, enabling the operator to view both settings simultaneously. - Robust Construction: Includes a stainless steel foam rack for 50 tubes (12 mm diameter) and interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter. *Similar Model Depicted The Ohaus VXMTDGB Multi-Tube Vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. The VXMTDGB is microprocessor-controlled and run in continuous or timed mode. Digital models feature touchpad control for easy input of settings, and independent LED displays for speed/time. Timer displays elapsed time and when programmed, shuts off unit when time reaches zero.Digital models feature a programmable pulse mode which allows the user to adjust the pulse-on/pulse-off times between 1- 59 sec intervals, enhancing the vortex action by creating a more vigorous mix. The variable speed microprocessor control provides consistent uniform mixing action. Basic speed of 500 to 2500 rpm and time settings are adjusted with knobs using 1 to 10 dial settings. INCLUDED: The Ohaus VXMTDGB Multi-Tube Vortex Mixer includes: - 12mm Test Tube Foam Rack - Tray Pad Set (Top & Lower Pad) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Eurostar 60 Digital Overhead Stirrer Viscosity Max 50000mPas Speed Range 0/30 - 2000 rpm Devi (more)ation of Speed Measurment Less than 1% Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universally used strong laboratory stirrer for quantities upto 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 - 2000 rpm. Safetycircuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintainedand variations are adjusted automatically. This guarantees a constant speedeven with changes in viscosities of the sample. INCLUDED: The IKA Eurostar 60 Digital Overhead Stirrer includes: - EUROSTAR 60 digital - Chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Eurostar 60 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)40 lMotor rating input176 WMotor rating output126 WMotor principleBrushless DCSpeed display7 segment LEDSpeed range0/30 - 2000 rpmViscosity max.50000 mPasOutput max. at stirring shaft126 WPermissible ON time100 %Torque max. at stirring shaft60 Ncm Speed controlstepless Setting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 10 mmHollow shaft, inner diameter11 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter16 mmExtension arm length220 mmSpeed controlelectronicNominal torque0.6 NmHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)86 x 248 x 208 mmWeight4.4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 42Voltage230 / 115 / 100 VFrequency50/60 HzPower input176 WComparison of ModelsSpecificationsEurostar 20 DigitalEurostar 20 High Speed DigitalEurostar 40 DigitalEurostar 60 DigitalEurostar 100 DigitalEurostar 200 DigitalEurostar 400 DigitalStirring Quantity Max. per Position (H2O)15 l20 l25 l40 l100 l100 l150 lMotor Rating Input70 W176 W118 W176 W186 W130 W220 WSpeed Range0/30 - 2000 rpm0/150 - 6000 rpm0/30 - 2000 rpm0/30 - 2000 rpm0/30 - 1300 rpm0/6 - 2000 rpm0/6 - 2000 rpmViscosity Max.10000 mPas10000 mPas30000 mPas50000 mPas70000 mPas100000 mPas100000 mPas.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V Display 10” full co (more)lor touch screen with adjustable angle Block Temperature Range 4°C - 99.9°C Temperature Accuracy ≤ ± 0.2°C (at 90°C) Features - Dual block format - All accept 0.2 mL PCR tubes and strips, flat or dome caps - Each block functions independently - Block temperature range: 4°C - 99.9°C; Lid temperature range: 30 - 112°C - Intuitive Touch Screen Control - Large 10-inch adjustable touch screen - folds away when not in use - Program wizard for fast and easy programming - Advanced program features - Gradient capabilities - up to 8 temperatures per block Designed for laboratories wanting flexibility in their applications, Benchmark’s MultiCycler™ Thermal Cyclers offer multiple, independent cycling blocks in a single unit. Dual or triple block models are available, both offering extremely fast cycling profiles, large touch screen interfaces, self-adjusting heated lids, gradient capabilities, and an easy-to-use program wizard. All programming features are accessed from the large, 10” full color touch screen. The screen can be angled towards the user when in use and then tucked away to save space. A program wizard guides users through the simple protocol set up process. Advanced programming features include gradient, adjustable ramp rates, and time increments and decrements. For multi-user labs, password protection prevents interference of an existing run. A USB provides for unlimited program storage and easy transfer of protocols between MultiCycler machines. The auto-adjusting heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. Peltier units allow for exceptionally fast heating and cooling of the blocks. Temperature change is precisely and accurately controlled within tight tolerances by a proprietary algorithm that simulates sample temperature, resulting in fast runs and reproducible results. The wells are arranged in a 4×8 and 6×8 format, allowing for the use of PCR strip tubes in both models. Each block is independently controlled. INCLUDED: The Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V includes: - Power Cord - Two Year Manufacturer's Warranty

Benchmark Incu-Shaker Mini Incubator ShakerFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 in. work space accepts several platforms and a variety of flasks, tubes and other common vessels. Features a touch screen control over time, speed, and temperature settings. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker Mini Incubator Shaker includes: - 9.5 x 11.5 in Non-slip Rubber Coated Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty