Laboratory equipment

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in good cosmetic condition and is made up of the following units; 1x FluidX X-Seal AAS Automated Adhesive SealerS/N: 1407 This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended. Bambi VT75 CompressorS/N: VT75-01229 52x42x61 cm28.08 Kg This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi. 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 2x Compressor connecting tubes 4x Rubber grommets 1x Roll of Clear Adhesive SealP/N: 43-1031 2x Spare Rollers 1x Connection Valve 1x RS232 cable

This Applikon My-Control Z310210011 Bioreactor Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use.

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Showa Optronics Co Laser System With Olympus FV10-COMB This system was removed from a university lab (more) where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Olympus FV10-COMB Showa Optronics Co GLS3135 LaserShowa Optronics Co GLS3135 PSU Showa Optronics Co GLG7000Melles Griot 05-LHP-991

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

Bruker MicrOTOF Q Mass Spectrometer This item was removed from a university laboratory where it was  (more)surplus to requirements. The mass spectrometer powers on and is in great condition with minimal wear. No further testing has been conducted. Specifications:- Model: micrOTOF-Q - Serial No.: 228888.00074 Included Software:- I/O and Security Software and Documentation - Version: 1.16 - HP / Hewlett-Packard REV.B - CD Kit: 443200-404

Job Lot of 6 Hewlett Packard 1100 Series HPLC Units Spares or Repairs These were removed from a labo (more)ratory where they were surplus to requirements. All items are untested and are in reasonably good used condition. Due to the items being untested and missing various parts, this job lot is listed as Spares or Repairs. Included is; Hewlett Packard 1100 Series HPLC Units: 1 x G1316A Column CompartmentSerial No. DE64302229Missing front faceplate 3 x G1314A Variable Wave DetectorSerial Nos. JP11614743, JP64202341, JP11615583All missing detector parts and one missing rear communication board 1 x G1311A Quaternary PumpSerial No. DE70301670Missing valve parts 1 x G1312A Binary PumpSerial No. DE43616189Missing a channel pump 3 x 1100 Series Solvent Trays 1 x 1200 Series Solvent Tray Agilent Technologies 1200 Series top and bottom casings for G1322A De-gasser

Beckman Coulter Biomek NXp Laboratory Automation Workstation This item was removed from a university (more) lab where it was surplus to requirements. The unit powers on and is in good cosmetic condition with some surface wear. Without the software, the robotic functions were unable to be tested, so no further functional testing was conducted. Model: Biomek NXpSerial No.: A318400876 Additional Components:- DFMZ Design Filtration Microzone - Model: DA1-1x2-2 - Serial No.: 952213 Accessories Included:- Insert Pak 11mm Non-Sterile - Serial No.: 3364 - 2 x Top Plate, Multi-Config Peltier ALP - Part Number: A32165 REV AA - 15 x Reservoirs, 75 ml, Case Sterile - Lot: P61122MPI - Physical Manual: Version 3.3 Tutorial

Taylor Hobson Talyrond 300 Motorized Radial Arm This system was removed from a university where it w (more)as surplus to requirement. It is in reasonably good cosmetic condition. When powered up, the item emitted smoke, therefore we did not conduct further testing. Due to the item being damaged, it is listed as Spares/Repairs.

Christie Mirage S+4K Commercial Projector This was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and is in good cosmetic condition with minor marks. The control buttons and remote control are fully functional and performing as intended.

This Kedee Vacuum Tissue Processor KD-TS6B was removed from a university where it was surplus to req (more)uirement. Model: KD-TS6BSerial#: B97032Date: 2015-01 The item is in reasonable cosmetic condition and it powers on and is in good working order. Both motors are functional. Touch screen responsive.

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator This was removed from a university lab where it  (more)was surplus to requirements. The unit has been professionally serviced and is in full working order. It is in good cosmetic condition with minor marks.

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack This incubator was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and has been tested with a thermometer(not included). It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Dionex LC25, ED50, GP50, AS40 Liquid Chromatography System This was removed from a university lab wh (more)ere it was surplus to requirements. The system has been professionally serviced. A full report is available on request. Included are; Dionex LC25 Chromatography OvenModel: LC25Serial#: 05090041 Dionex ED50 Electrochemical DetectorModel: ED50ASerial#: 03070027 Dionex GP50 Gradient PumpModel: GP50Serial#: 03080052 Dionex AS40 Automated SamplerModel: AS40-1Serial#: 99110492

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab This system was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system comprises the following: Qiagen Pyromark Q96 ID Qiagen PyroMark Vacuum Prep WorktableRef - 60-0237 PyroMark Vacuum Prep ToolRef - 60-0236 PyroMark Q96 IDApplication Software User Manual

AMS Alliance SmartChem 200 Automated Discrete Analyser Lab This was removed from a university lab wh (more)ere it was surplus to requirements. It powers up and is in good cosmetic condition. When powered up the item performs a self-calibration test that displays the motor in good working order, unable to test further as it requires connection to software.

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

Bruker Agena Bioscience  Sequenom MT Analyser & MassARRAY NanoDispenser This system was rem (more)oved from a university lab where it was surplus to requirements. We have set the system up and everything powers up. The MassARRAY NanoDispenser has been run in standalone mode as it has its own PC built-in. We have the passwords for the software. We have had the unit home its dispenser, it appears to respond to all commands. After re-seating the Acqiris PCi card in the PC, we were able to start the Acqiris Live 2.4 program. The main PC has the following software installed:Acqiris Digitizer/AcqirisLive Version 2.4 Release 8 Build 0.Acronis True Image.Bruker Daltonics FLEXControl.CMU 1394 Camera Demo.MassARRAY Typer Version 4.0.Plus a lot more. We were unable to get the PC to communicate with the MT Analyser via the com port. Included are; 1x Sequenom MT AnalyserModel MT9 1x MassARRAY NanoDispenser. Accessories:2x HP Monitors 1x LG PCModel IPC-5120 Cables:2x Male to Male VGA Cables1x HP Male DVI to 2x Female VGA Cable 1x Mini gender changer Ribon cable 9 pin Male to 2x 9 pin Female cable 1x 9 pin Female to Female cable 1x D-SUB mixed contact connector to 3x BNC Cable. 1x TRIPP-LITE Compact Flexible Keyboard: 1x HP Keyboard 1x HP MouseModel no. M-SBJ96 1x Glass FlaskVolume: 3L 1x Allen Key8MM

Miltenyi Biotec Auto Macs Pro Separator System Lab This system was removed from a university lab whe (more)re it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

ElectroLab Dissolution Tester EDT-08LX Lab This item was removed from a university where it was surp (more)lus to requirement. The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition.

This Vankel VK7010 Dissolution System VK750D Heater/Circulator was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). We are unable to test it further at our facility. The lab confirmed the unit was in good working order prior to removal. It is in good cosmetic condition, with minor marks from previous use. Printer paper not included. Includes 2 x Power cables and 2 x Data cables.

Thermo Scientific Cytomat Microplate Hotel This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. We have no key for the lock, but it is unlocked.

Job Lot Of Swagelok Pressure Gauges + Compression Fittings These were removed from a university lab  (more)where they were surplus to requirements. The parts are as follows: PART NUMBER DESCRIPTION CONDITION QUANTITY PGI-50m-PG25-LASX-ABE Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok BN 18 Valve 1/4" Ball Valve - Boss/Waverley & Others Used 16 3/8" & 3/16" nuts, tees , fittings Swagelok Assorted Assortment ~60mm Panel mount, bottom entry gauge  BNIB 5 PGU-50-PC200-L-4FSF Gauge, bottom entry, UHPurity - Swagelok BN 6 PGU-50-PC200-C-4FSF Rear entry BNB 5 Pressure gauge Oil filled, rear entry, 0-11 Bar New 4 Pressure gauge Bottom entry, 0-11 Bar New 6 Union elbow 3/8" Elbows  6 Union cross 3/8" Crosses  5 Straight union 3/8" Union  14 SS-4WVCR-6-400  BNIB 6 SS-4WVCR-CP  BNIB 6 Union 3/8" Elbow Used 5 SS-810-1-8W 1/2" tube x 1/2" male weld BNIB 2 SS-600-7-6-BMP 3/8" x 1/2"F  2 SS-PB4-TA4 Box of 10 quick connects BNIB 1 SS-PB8-TA8 Box of 10 quick connects BNIB 4 SS-P Box of 10 quick connects BNIB 7 SS-QC4-S-400 Box of 10 quick connects BNIB 3 SS-QC4-B-4PM Box of 10 quick connects BNIB 1 Assorted quick connects Assorted quick connects BN ~50

This system was removed from a university lab where it was surplus to requirements. All units power  (more)up but this has not been tested further as a system. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Waters Pump Control Module IIModel: PC2S/N: K05PC2 650E 1x Waters Temperature Control Module IIModel: TC2S/N: H05TC2 641E 1x Waters 515 HPLC PumpModel: 515S/N: L05515 088A 1x Waters Column Fluidics OrganizerModel: APCS/N: K05APC 452M 1x Waters 2767 Sample ManagerModel: 2767 SAMPLE MGR.Part no: 725000299S/N: H05XY6 738MSample tubes fit 16ml vials. 1x Samsung MonitorModel: 171S SS/N: GH17HJCTB07621N 1x AOC LCD MonitorModel: LM520 AS/N: T5GJ32AR05528 1x Fujitsu Siemens Mouse1x Acer Mouse1x Acer KB-0759 Keyboard1x BTC 5197 Keyboard 1x Applied Biosciences Programmable Absorbance DetectorModel: 785AS/N: 29511519 1x IBM ThinkCentre PCMT-M 8143-QGHS/N: LMPM2TKThe hard drive has been removed from the PC.We are certain it was paired up with Control Modules. 1x HP vw8400 WorkStationS/N: CZC7113H1HMassLynxMassLynx DiversitySirius Analytical Instruments 1x Waters Column Heater ModuleModel: CHMS/N: M05CHM174M 1x Waters Leak Sensor Module 1x Gilson 506C System Interface ModuleS/N: 369J8PA500 1x Waters Fraction Collector III Ver.W2.01Model: WFCS/N: D06WFC178J 1x Perkin Elmer Series 200 LC PumpS/N: 291N 5110302 1x S-Video Mini-DIN 4-pin1x RS-232C Serial Cable1x Control Cable Assembly1x SCSI I to SCSI II Cable1x Drive Cable 25 Pin male/male 1x Waters 2525 Binary Gradient Module Installation & Maintenance Guide1x Waters 2767 Sample Manager Injector Installation & Maintenance Guide1x Waters 515 HPLC Pump Operator's Guide1x Performance Maintenance Protocol 2007-20091x Waters Purification of Compounds - Using FractionLynx

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup. There are no gloves included. It is in good cosmetic condition with minor marks. Internal dimensions- D57.5 W105 H47cmShelf - 104 x 25cmRight chamber - D29 W33 H30cm

This was removed from a university lab where it was surplus to requirements. The cabinet was purchas (more)ed in 2011 but we are told it was never used. The run hours of 53 reflect this. It is in excellent cosmetic condition and in full working order. Inner compartment 200 x 110 x 115cm

Life Technologies Ion Torrent PGM Sequencer, One Touch 2, ES System This was removed from a universi (more)ty lab where it was surplus to requirements. All modules of the system power up but have not been tested further. Included are; Life Technologies Ion OneTouch ES Enrichment System Module S/N - 394314 Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing S/N - 2456280-0981Ref - INS1005527 Life Technologies Ion Torrent Personal Genome Machine Ion PGM System.S/N: 11C120503Release: 5.10.0Datacollect version: 489LiveView version: 755Hw8560 version: 134 Firmware version: 53 FPGA version: 81.5.4Script version: 22.0.0OS: 21Graphics: 36TSLink version: 1.0.5Board version: 4 A.1Board serial: 001164Mac Addr: 00:21:73:00:04:8cKernel Build: #50 PREEMPT Fri Nov 5 10:13:40 EDT 2010u-boot Build: U-Boot 1.1.6 (Jan 6 2011 - 16:46:08)Data storage: 1459716 MB free out of 1548190 MB (94% free)

Amersham Biosciences AKTA FPLC System UPC-900 P-920 INV-907 M-925 Frac-950 This was removed from a u (more)niversity lab where it was surplus to requirements. The unit has been professionally serviced and is in full working order. It will require an interface box to connect it to a PC. It is in good cosmetic condition with minor marks from use. Included are; P-920 -Serial number- 01155727Code number- 18-1164-68 AKTA FPLCserial number- 01160429Code number- 18-6083-20 UPC-900Serial number- 01159938Code number- 18-1128-95 INV-907Serial number- 01158917Code number- 18-1108-40 M-925Serial number- 01160502Code number- 18-1118-89