Laboratory equipment

VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz (more) 0.88 cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and very low vibration - Excellent environmental friendliness due to efficient solvent recovery This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. This system is usable for increased vacuum requirements with high boiling solvents and often replaces rotary vane pumps. Typical applications are rotary evaporators and vacuum drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling and active protection of the environment.INCLUDED: The VACUUBRAND MD 1C +AK+EK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND EK 600 Exhaust Vapor Condenser for VACUU-PURE VACUUBRAND EK 600 Exhaust Vapor Condenser f (more)or VACUU-PURE with 500ml round bottom flask is for use with VACUU PURE series screw pumps. INCLUDED: The VACUUBRAND EK 600 Exhaust Vapor Condenser for VACUU-PURE includes: - VACUUBRAND EK 600 Exhaust Vapor Condenser for VACUU-PURE - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND DVR 2pro Vacuum Gauge Upper Measuring Limit 1060 mbar/hPa (795 torr) Lower Measuring Lim (more)it 1 mbar/hPa (1 torr) Vacuum Sensors Integrated Features - Improved functionality within the navigation menu helps to save energy and to increase the life cycle of the battery - Large, graphical analog display with digital measuring values alows to detect tendencies and makes it easier to readout precisely - Pressure unit user-selectable in mbar, hPa or Torr prevents unnecessary conversions - Different vacuum connections and the additional support rod allow the use in almost every laboratory application - Chemical resistant materials for wetted parts together with the capacitive ceramic diaphragm pressure sensor provide excellent long-term stability and accuracy The DVR 2pro is a fully electronic, versatile vacuum gauge for the measuring range from atmospheric pressure to 1 mbar. All wetted parts are made from enhanced chemical resistant material which allows the use under very rough laboratory conditions. The high accuracy and the large graphical display from the DVR 2 have also been carried forward for the “pro” version. One of the main enhancements is the power supply with a normal 9 V Alkaline battery. The new battery slot at the back of the gauge allows for easy replacement of the battery. A wider range of connection parts provide a great range of connection flexibility for laboratory use.INCLUDED: The VACUUBRAND DVR 2pro Vacuum Gauge includes: - 9V Alkali-Manganese Battery - Support Rod and Connecting Parts - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND Diaphragm and Valve Service Kit for ME 8C NT Set of diaphragms and valves for the VACUUBR (more)AND ME 8C NT Chemistry Diaphragm Pump INCLUDED: The VACUUBRAND Diaphragm and Valve Service Kit for ME 8C NT includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 Set of diaphragm (more)s and valves for MD 4C NT/VARIO, PC 3003 and PC 3004. INCLUDED: The VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 includes: - VACUUBRAND Diaphragm and Valve Service Kit for MD 4C NT/VARIO, PC 3003, and PC 3004 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND Diaphragm and Valve Service Kit for MD 1C, MD 1C +AK+EK, MD 1C VARIO-SP, PC 2001 VARIO, P (more)C 3001 VARIO, and MV 0.5C Set of diaphragms and valves for the VACUUBRAND MD 1C, MD 1C +AK+EK, MD 1C VARIO-SP, PC 2001 VARIO, PC 3001 VARIO, and MV 0.5C models. INCLUDED: The VACUUBRAND Diaphragm and Valve Service Kit for MD 1C, MD 1C +AK+EK, MD 1C VARIO-SP, PC 2001 VARIO, PC 3001 VARIO, and MV 0.5C includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head Upper Measuring Limit 1080 mbar/hPa (810 Torr)  (more)Lower Measuring Limit 0.1 mbar/hPa (0.1 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Capacitive ceramic diaphragm vacuum sensor VSK 3000 made of aluminum oxide with high chemical resistance, gas type independent absolute pressure Measurement - Excellent measurement accuracy, temperature and long-term stability The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The ceramic membrane vacuum sensor VSK 3000 is suitable for the measuring range from atmospheric pressure to 0.1 mbar. It measures regardless of the gas type and is highly chemically resistant, which means that the measurement can be carried out directly at the process, with excellent measurement accuracy and high long-term and temperature stability. Please also note our alternative product VACUU·VIEW.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSK 3000 Head includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND Chemistry Diaphragm Pump MD 1C Ultimate Vacuum 2 mbar Max. pumping speed at 60 Hz 0.88  (more) cfm Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Excellent ultimate vacuum even with gas ballast - Whisper quiet and ultra low vibration - Proven long diaphragm life, maintenance-free drive system Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet high requirements regarding ultimate vacuum. The three-stage construction provides the advantageous combination of high pumping speed and deep ultimate vacuum in a pump with a very small footprint. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The MD 1C with gas ballast valve is optimally prepared for pumping easily condensable vapors (high boiling solvents). Three-stage chemistry diaphragm pumps are an excellent solution for applications involving corrosive gases and vapors at high vacuum requirements. Typical applications are vacuum generation at rotary evaporators, vacuum concentrators and many other laboratory applications. Due to their excellent ultimate vacuum they are the ideal solution for evaporation of high boiling solvents even with gas ballast. The MD 1C pump is the heart of a whole line of reliable chemistry pumping units.INCLUDED: The VACUUBRAND Chemistry Diaphragm Pump MD 1C includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND BVC Professional G Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum P (more)umping Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - Non-contact sensor for electronic monitoring of the liquid level in the collection bottle. - Disinfection routine for the suction tubing for drawing in disinfectant after switching off the pump. - Self-closing quick couplings (as accessory to the BVC professional G) for convenient and safe bottle change, e.g., for work with biohazards. - For professional work and a perfect fit for required safety protocols. The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4l PP bottle with self-closing quick couplings minimizes risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2l borosilicate glass bottle allows you to work with aggressive disinfectants like chlorine bleach. INCLUDED: The VACUUBRAND BVC Professional G Fluid Aspiration System includes: - Chemistry Diaphragm Pump - Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

VACUUBRAND BVC Professional Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pum (more)ping Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - Non-contact sensor for electronic monitoring of the liquid level in the collection bottle. - Disinfection routine for the suction tubing for drawing in disinfectant after switching off the pump. - Self-closing quick couplings (as accessory to the BVC professional G) for convenient and safe bottle change, e.g., for work with biohazards. - For professional work and a perfect fit for required safety protocols. The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4l PP bottle with self-closing quick couplings minimizes risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2l borosilicate glass bottle allows you to work with aggressive disinfectants like chlorine bleach. INCLUDED: The VACUUBRAND BVC Professional Fluid Aspiration System includes: - Chemistry Diaphragm Pump - Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

VACUUBRAND BVC Control G Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pumpin (more)g Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - powerful and long-lasting chemistry diaphragm pump for universal economical use. - Extremely compact, space saving and low noise and thus the ideal tool in the workplace. - Easy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; with hydrophobic protection filter 0.2 µm, autoclavable quick-couplings available as accessory. - Ready to accept a second aspiration hand controller (VHCpro) to support two users. The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems. INCLUDED: The VACUUBRAND BVC Control G Fluid Aspiration System includes: - Chemistry Diaphragm Pump - Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

VACUUBRAND BVC Control Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pumping  (more)Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - powerful and long-lasting chemistry diaphragm pump for universal economical use. - Extremely compact, space saving and low noise and thus the ideal tool in the workplace. - Easy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; with hydrophobic protection filter 0.2 µm, autoclavable quick-couplings available as accessory. - Ready to accept a second aspiration hand controller (VHCpro) to support two users. The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems. INCLUDED: The VACUUBRAND BVC Control Fluid Aspiration System includes: - Chemistry Diaphragm Pump - Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

VACUUBRAND BVC Basic G Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pumping  (more)Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - Powerful and long-lasting chemistry diaphragm pump for universal economical use. - Extremely compact, space saving and low noise and thus the ideal tool in the workplace. - Easy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; with hydrophobic protection filter 0.2 µm, autoclavable quick-couplings available as accessory. - Ready to accept a second aspiration hand controller (VHCpro) to support two users. The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level - and thus the suction force - is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used. The smooth surfaces allow an easy cleaning of the systems. INCLUDED: The VACUUBRAND BVC Basic G Fluid Aspiration System includes: - Chemistry Diaphragm Pump - Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

VACUUBRAND BVC Basic Fluid Aspiration System Max. back pressure 1.1 bar Collection Bottle 4l Polypr (more)opylene Control Range 100 - 500 mbar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network. - Stable base and electricity-free operation for convenience. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory. - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media. - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle. The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic Fluid Aspiration System includes: - Complete Fluid Aspiration System for current Vacuum Source - Hose Nozzle DN 6/10mm - Aspiration Hand Set VacuuHandControl VHC - Collection Bottle - Protection Filter - Operator's Manual VACUUBRAND BVC Basic Fluid Aspiration System SpecificationsVacuum controllerMechanical vacuum controllerControl range100 - 500 mbarCollection bottle4l PolypropyleneMax. back pressure (abs.)1.1 barInlet connectionSuction controllerOutlet connectionHose nozzle DN 6-10 mmProtection class IEC 60529IP 54Weight2.8 kgNRTL certificationNoItems suppliedComplete fluid aspiration system for existing vacuum source, with automatic vacuum control, hose nozzle DN 6/10 mm for connection to a vacuum supply, aspiration hand set VacuuHandControl VHCpro, collection bottle, protection filter and manual.DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

VACUUBRAND BVC 4L PP Collection Bottle w/ Sterile Filter and Inlet Tube The VACUUBRAND BVC 4L PP Col (more)lection Bottle w/ Sterile Filter and Inlet Tube is an essential accessory tailored for VACUUBRAND BVC Fluid Aspiration Systems. This robust collection bottle boasts a 4-liter capacity and is constructed from heavy-walled, vacuum-proof polypropylene (PP), known for its high chemical resistance. The design includes a specialized bottle head that significantly reduces foam and aerosol formation during use. It features a hose nozzle compatible with VacuuHandControl, and an additional port is available to connect a second VacuuHandControl if necessary. A hydrophobic sterile filter with a 0.2 um pore size is integral to safeguarding both the pump and the surrounding environment from contaminants. The entire unit is designed to be fully autoclavable, facilitating straightforward cleaning and sterilization, making it a reliable and hygienic choice for laboratory fluid management. INCLUDED: The VACUUBRAND BVC 4L PP Collection Bottle w/ Sterile Filter and Inlet Tube includes: - 4L PP Collection Bottle - 0.2 um Hydrophobic Filter - Hose for Connection to Pump - Hose Nozzle for VacuuHandControl - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND BVC 2L Glass Coated Collection Bottle w/ Sterile Filter and Inlet Tube The VACUUBRAND BVC (more) 2L Glass Coated Collection Bottle w/ Sterile Filter and Inlet Tube is an integral component for VACUUBRAND BVC Fluid Aspiration Systems. This collection bottle is crafted from 2L borosilicate glass, renowned for its high chemical resistance and enhanced safety with a splinter-proof coating. It features a specially designed bottle head that effectively minimizes foam and aerosol formation. Included is a hydrophobic sterile filter with a pore size of 0.2 um, crucial for protecting both the pump and the surrounding environment from contamination. The bottle is equipped with a hose nozzle tailored for VacuuHandControl, and an additional port for connecting a second VacuuHandControl if needed. For convenience and safety, the entire assembly is fully autoclavable, ensuring easy sterilization and maintenance. INCLUDED: The VACUUBRAND BVC 2L Glass Coated Collection Bottle w/ Sterile Filter and Inlet Tube includes: - 2L Borosilicate Glass Collection Bottle - 0.2 um Hydrophobic Filter - Hose for Connection to Pump - Hose Nozzle for VacuuHandControl - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps For Use With VACUU-PURE Screw Pum (more)ps Catchpot Volume 500 ml Ambient Operating Temperature 10°C to 40°C Features - For VACUU·PURE Screw Pumps - Direct mounting at the inlet, compact and leak-tight - High conductance - Direct visibility of condensate through the coated round bottom flask - Easy draining of condensate The VACUUBRAND AK Inlet Separator/Catchpot is an essential accessory designed specifically for VACUU·PURE Screw Pumps. It facilitates direct mounting at the pump's inlet, ensuring a compact and leak-tight integration with a leakage rate of 10-4 mbar l/s. This separator features high conductance and includes a 500 ml round bottom flask made of glass, which offers excellent chemical resistance and clear visibility of the condensate. The separator is equipped with a KF DN 25 connection and a DN 15 mm hose nozzle for straightforward setup. Its design allows for easy drainage of condensate, making it both functional and user-friendly, ideal for protecting the vacuum pump from particles and liquid droplets. INCLUDED: The VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 Separators at the inlet pro (more)tect pumps from particulates and droplets which may shorten service intervals and even reduce the lifetime and the operating performance of oil-sealed rotary vane pumps. Separators (AK) protect the vacuum pump at the inlet from particles and liquid droplets. Separators catchpot made of plastic (PMP) with good chemical resistance. INCLUDED: The VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 includes: - VACUUBRAND AK Inlet Separator/Catchpot for RE/RZ5, RE/RZ6, and RE/RZ 2.5 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Memmert BE 300 is ideally suited for all applications with temperatures up to 70°C in research,  (more)medicine, pharmacy and food analysis, as well as food chemistry. It is especially useful for incubating live cultures at 37°C. The incubator is equipped with manually regulated air flow. Temperature range: Ambient temperature +5°C to 70°C Internal glass door for observation Convection: natural Capacity: 39 L Dimensions (WxDxH): 630 x 430 x 600 mm Internal dimensions (WxDxH): 480 x 255 x 320 mm Weight: 30 kg

Temperature range: Ambient +5°C to 300°C Temperature uniformity (at 150°C): ± 2.5 K Temperature fluc (more)tuation (at 150°C): ± 0.3 K Heating up time to 150°C: 25 min Recovery time after door was opened for 30 s (at 150°C): 6 min Air change rate at 150°C: 64 x/h Load per rack: 12 kg Total load: 25 kg Interior volume: 20 L Internal dimensions (WxHxD): 222 x 330 x 300 mm Dimensions (WxHxD): 435 x 495 x 520 mm Weight: 27 kg

Maximum capacity: 4 x 750 ml Maximum permissible density: 1.2 kg/dm³ Speed range: 200 – 14000 rpm Ma (more)ximum acceleration: 20913 RCF Maximum kinetic energy: 27450 Nm Dimensions (WxDxH): 535 x 610 x 345 mm Weight: 68 kg Equipped with: 1x Eppendorf A-4-62 swing-out rotor (max 4000 rpm) 4x Eppendorf 03/03 bucket 4x Eppendorf 5810 blue insert (9 positions for 15 mL falcon tubes) 2x Eppendorf 5810 orange insert (4 positions for 50 mL falcon tubes)

Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 The Thermo Scientific TX-750 Swing Buc (more)ket Rotor, Cat. #: 75003180, is a centrifuge rotor designed for use with the Thermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifuges . This rotor has a maximum speed of 4,700 RPM and a maximum relative centrifugal force (RCF) of 4,816 x g. It can accommodate a maximum capacity of up to 4 x 750ml, making it suitable for a range of applications including cell culture work, blood separation, microbiology, genomics and more. INCLUDED: The Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 includes: - Thermo Scientific TX-750 Swing Bucket Rotor - 6 Months Parts and Labor Warranty Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 SpecificationsMaximum Speed4,700 RPMMaximum RCF4,816 x gMaximum Capacity4 x 750mlMaximum Radius19.5 cmMinimum Radius8.3 cmCentrifuge CompatibilityThermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifugesDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

The Innova CO-170 CO₂ incubator is designed to provide stable and homogeneous atmosphere required fo (more)r cell culture by controlling temperature, carbon dioxide and optionally oxygen for cultivating samples and cells from biological laboratories. The fan-less design offers more usable space and eliminates the fan, reducing contamination. A six-sided direct heating system provides a uniform incubated environment to gently bathe cells, and the deep-drawn, stainless-steel chamber eliminates seams or welds and allows easy cleaning. Temperature range: Ambient +4°C to 50°C Temperature control increments: 0.1°C Temperature stability (at 37°C): ± 0.1°C Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Humidity control (at 37°C): 95% Reservoir capacity: 2.5 Liters Volume: 170 L Dimensions: (WxHxD): 686 x 846 x 701 mm Interior dimensions: (WxHxD): 538 x 691 x 445 mm Weight: 83 kg

Thermo Scientific TX-750 Swing Bucket Rotor, Cat. # 75003607 Thermo Scientific TX-750 Swing Bucket R (more)otor, Cat. # 75003607. Rotor body only. Maximum speeds up to 4,700 RPM with RCF up to 4,816 x g for up to 4 x 750ml capacity. For use with Thermo Scientific Sorvall Legend XT/XF, Sorvall ST 40, Heraeus Multifuge X3/X3F, Heraeus Megafuge 40, SL 40/40F centrifuges. INCLUDED: The Thermo Scientific TX-750 Swing Bucket Rotor, Cat. # 75003607 includes: - Full 6 Month Parts and Labor Warranty Thermo Scientific TX-750 Swing Bucket Rotor, Cat. # 75003607 SpecificationsMax Speed4,700 RPMMax RCF4,816 x gMax Capacity4 x 750mL

Thermo Scientific TX-200 Swing Bucket Rotor with Round Buckets The Thermo Scientific TX-200 Swing Bu (more)cket Rotor with Round Buckets, is a centrifuge rotor designed for use with the Thermo Scientific Sorvall™ ST16, SL16, Sorvall Legend™ X1, Multifuge™ X1, Megafuge™ 16 Centrifuge Series centrifuges. This rotor has a maximum speed of 5,500 RPM and a maximum relative centrifugal force (RCF) of 5,580 x g. It can accommodate a maximum capacity of up to 4 x 180mL, and is suitable with cell culture, blood separation, microbiological and molecular biology applications. INCLUDED: The Thermo Scientific TX-200 Swing Bucket Rotor with Round Buckets includes: - TX-200 Swing Bucket Rotor - 7500 - 6 Month Parts and Labor Warranty Thermo Scientific TX-200 Swing Bucket Rotor with Round Buckets SpecificationsMaximum Speed5,500 RPMMaximum RCF5,580 x gMaximum Capacity4 x 180mLRadius16.5 cmCentrifuge CompatibilityThermo Scientific Sorvall™ ST16, SL16, Sorvall Legend™ X1, Multifuge™ X1, Megafuge™ 16 CentrifugesDownloadsTechnical Specification Download Product Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

Thermo Scientific Precision GP 20 Water Bath The Thermo Scientific Precision GP 20 Water Bath is eng (more)ineered for a variety of applications, capable of regulating water temperature from Ambient to 100°C. This durable, high-efficiency water bath accommodates up to 20L (5.28 gallons), ensuring a combination of robust performance and substantial capacity. It is equipped with safety mechanisms against excessive temperature, effectively preventing thermal runaway. The integration of innovative auto-on and auto-off timers enhances operational efficiency by customizing usage schedules. Furthermore, the water bath stands up to harsh chemicals and avoids corrosion, courtesy of its epoxy powder-coated exterior. The maintenance of the unit is uncomplicated due to the seamless stainless-steel interior of the chamber, simplifying the cleaning process. This suite of features collectively contributes to the water bath's reliability and functionality for rigorous and consistent use. INCLUDED: The Thermo Scientific Precision GP 20 Water Bath includes: - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Full Parts and Labor Warranty Thermo Scientific Precision GP 20 Water Bath SpecificationsTemperature RangeAmbient to 100°CTemperature Uniformity± 0.2°C at 37°CTemperature Stability± 0.1°C at 37°CVolume20L (5.28 gal.)ControlDigitalHeating Output1200WBath Dimensions (L x W x H)11.7 x 19.7 x 5.9 in. (29.7 x 50 x 15 cm)Overall Dimensions (L x W x H)15.4 x 21.8 x 9.2 in. (39.2 x 55.5 x 23.3 cm)Weight22 lb. (10 kg)Electrical Requirements100-120V or 200-230V, 50/60Hz, 1PhDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote