52k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Teledyne Lumenera INFINITY 2-1R Monochrome Microscope Camera with 1.4MP CCD Sensor

UsedLumeneraCamerasUnited States

From€3,452.48excl. VAT

In stock

Can't find what you're looking for?

Image Sensor
½” Interline Sony ICX205 1.4 megapixel monochrome progressive scan CCD sensor 7.6mm x 6.2mm array
Effective Pixels
1392×1040, 4.65μm square pixels
Frame Rate
30 fps at 1392 x 1040, >200 fps with binning and ROI
Signal/Noise
>64.6dB
Digital Output
8 and 14-bit
All 23 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 23

Brands
Lumenera
New/Used
Used
Image Sensor
½” Interline Sony ICX205 1.4 megapixel monochrome progressive scan CCD sensor 7.6mm x 6.2mm array
Effective Pixels
1392×1040, 4.65μm square pixels
Frame Rate
30 fps at 1392 x 1040, >200 fps with binning and ROI
Signal/Noise
>64.6dB
Digital Output
8 and 14-bit
Read Noise
8.5 e- rms
Mass
340g
Power Requirement
USB bus power, or external 5VDC – 500mA
Power Consumption
~2.5Watts
Operating Temperature
0° C to +50° C
Operating Humidity
5%-95%, Non-condensing
Integration Time
5.4 μs to 8 min
Shutter
Global Shutter
ROI
User Selectable
Exposure Mode
Automatic / Manual
White Balance
Automatic / Manual
Gain
Programmable / 0.5 to 15x optimizable
Interface Connector
Standard USB 2.0 high-speed interface
Dimensions (L x W x H)
3.85 x 2.00 x 2.75 inches
Lens Mount
C-Mount lens adapter
Binning Options
2×2, 4×4

Product description

1.4MP monochrome CCD camera with USB 2.0 interface, 30 fps at full res, global shutter, and advanced imaging control.

  • Sensor: ½” Interline Sony ICX205 monochrome progressive scan CCD, 1.4 megapixels (1392×1040), 4.65 μm pixel pitch, 7.6mm × 6.2mm array
  • Frame Rates: 30 fps at full resolution, >200 fps with binning (2×2, 4×4) and ROI
  • Signal-to-Noise Ratio: >64.6 dB
  • Read Noise: 8.5 e- rms
  • Digital Output: Selectable 8-bit and 14-bit pixel data modes
  • Shutter: Global shutter
  • Exposure: Automatic or manual modes, integration time ranges from 5.4 μs to 8 minutes
  • Gain: Programmable from 0.5x to 15x
  • White Balance: Automatic / Manual
  • Region of Interest (ROI): User selectable
  • Interface: High-speed USB 2.0 interface for plug-and-play installation, eliminating need for framegrabber
  • Physical Specs: Dimensions 3.85 × 2.00 × 2.75 inches, weight 340 g
  • Power: USB bus powered or external 5 VDC, 500 mA; consumption approx. 2.5 W
  • Operating Conditions: 0° C to +50° C, 5%-95% non-condensing humidity
  • Lens Mount: C-Mount adapter included
  • Software: Includes INFINITY ANALYZE software for camera control, image processing, measurement, annotation; TWAIN drivers enable integration with third-party applications
  • Additional: Custom design services and SDK available for specialized integration
  • Package Contents: AU-140M-CCD camera, USB 2.0 cable, CD-ROM with software, TWAIN driver, documentation

The INFINITY 2-1R camera enables high-quality monochrome imaging under varied lighting conditions, suitable for clinical, life sciences, materials science, and educational microscopy applications.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 9 November 2026