All categories

Ohaus Scout Pro SPU2001 Precision Scale - 2000g / 0.1g Laboratory balance Weighing capacity: 2000g ( (more)2kg) External dimensions (D)x(H)x(W): 210mm x 54mm x 192mm Tray size: 142mm x 165mm Net Weight: 1.8Kg

Van Der Heijden Kuhlmobil 001 VD Circulation Cooler Model 001 VD temperature range: 16°C - 24°C Powe (more)r: 625W Ambient temperature up to 32°C Water tank, contents approx. 5 litres Voltage : 230 V Frequency 50 Hz Cooling capacity 1.000 watts at 20°C water supply temperature Pump output, max. 3.5 bar (max. pumping height) Pump performance, max. 12 l/min (max. flow rate) Operating over-press., max. 18 bar Dimensions WxDxH mm : 360 x 470 x 590 Weight in kg : 52

Gilson Pipetman P10 Laboratory Pipette - Quantity 1 Variable volume pipette 1-10 µl Not calibrated

SHIMADZU SCL-10A vp HPLC System Controller Power Requirement : 220V Dimensions (WxDxH) : 30x20x42 cm (more) Weight: 20 kg Power ON/OFF -> ok Equipment not tested Testin SRAM not OK

Erlab CAPTAIR SMART 392 2C1P chemical filtration hood without filters Air flow: 440 m3/h Front air s (more)peed: From 0.4 to 0.6 m/s Voltage/Frequency: 220 V / 50-60 Hz Power consumption: 105W Number of filtration column and fans (IP44): 2 External dimensions (WxHxD): 1005 x (1340 min/ 1515 max) x 749 mm. Type of opening: total On wheeled trolley Year of manufacture: 2017 delivered without filters

Alltech 631 Column Heater for HPLC

Metrohm 858 Professional Sample Processor for parts

HANNA HI 180 magnetic stirrer 1 liter Stirring capacity: up to 1 L Speed range: up to 1000 rpm Size  (more)of the tray: Ø135mm Dimensions: 137 (Dia.) x 51mm Weight: 640g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Leica Microsystems Model: DMi6000B CS + TCS SP5 Confocal Microscope System Laser: HeNe (more) (543nm, 594nm, 633nm) /  Argon (458nm, 476nm, 488nm, 496nm, 514nm) / Diode UV 405nm Status: The extensive equipped system is completely reinstalled on a brand new computer with WIN10 and Leica LAS AF273, reinitialized and tested by Leica Service Engineer with Service report and Maintenance Batch on the device. The System is fully functional tested and ready to deliver good performance. System Description:Confocal microscope system with a broad range of scan speeds suited for high-resolution morphological imaging, as well as multispectral imaging. - 350-900 nm spectral detection range with 5 nm spectral resolution and sub-micron spatial resolution- Suitable for most fluorophores from DAPI to Cy5- Measuring up to five dimensions, including x, y, z, time and spectrum- Capable of multi-dimensional fluorescence qualitative and quantitative measurement, FRET, FRAP, FLIP, FLAP and other photobleaching-related applications- Suitable for imaging fixed specimen (No environmental chamber).Internal Detectors - Spectral detection channels: PMT1, PMT2, PMT3- Brightfield transmission channel: PMT TransMulti-dimension capability: xyz, xzy, xt, xyt, xzt, xyzt, xy, xz, xyt, xyz Stage:- Manual moving X, Y stage- Motorized z stage (piezo-controlled) with 166.68 µm scanning rangeZoom range: 1x-32x Pinhole size: 20 µm-600 µm Contrast enhancement options: Brightfield, DIC and polarized Software: Leica LAS AF, Version 2.7.3 on Windows 10, for image acquisition and processing Scanners Conventional scanner: 10-1400 Hz (2-3 frames/sec at 512 x 512 pixels) Internal detectors Reflection/fluorescence mode (spectral detection range 400-800 nm) - Spectral detection channels: PMT1, PMT2, PMT3- Additional PMT in transmission modeType         Wavelenght (nm)                      Dyes and useUV            405                                                DAPI, HoechstArgon       458, 476, 488, 496, 514              CyanFP, GFP, Alexa488, CY2, YFPHeNe        543                                               Alexa 546, Alexa 555HeNe        594HeNe        633                                               Cy5, Alexa 647 - An acousto-optical tunable filter (AOTF) controls the intensity of the visible excitation laser light.- An acousto-optical beam splitter (AOBS) is used to split excitation light and emission light instead of filter blocks.MicroscopeLeica DMI 6000B CS Trino inverted microscope with motorized XYZ-stage Objectives:- HCX PL FL L 40x/0.60 CORR PH2 0-2/C (- HCX PL APO 63x/1.40-0.60 Oil. Lbd. BL- HC PL FLUOTAR 10x/0.30 Ph1- HCX PL APO 40x/1.25 Oil Ph3 CS- HCX PL FL L 63x/0.70. CORR- HI PLAN 20x/20X/0.40 Fluorescent SourceLeica Lamphouse 106z HG 100W light source with LEJ EBQ100 Mercury Burner Power Supply for fluorescence excitation. Fluorescence Filters:- A4- L5- Y5- N2.1- Analyzer Condition:The extensive equipped system is completely reinstalled on a brand new computer with WIN10 and Leica LAS AF273, reinitialized and tested by Leica Service Engineer with Service report and Maintenance Batch on the device. The System is fully functional tested and ready to deliver good performance. Complete German Configuration Summary: 156504116            SuperZ Galvo Tisch Typ H156504114            Einsatz rot Typ H          156504145            3 Plattenkreuztisch mot SP5 invers15500325              Vorschaltgerät ebq 100 iso-l15000906000001 PMT-Modul wassergekühlt SP5/SP8155934681            Optical Outfit DMI 6000 CS w. ICT11506239              HI PLAN 20x/20X/0.40 15506203              HCX PL FL L 40x/0.60 CORR PH2 0-2/C15506192              HCX PL APO 63x/1.40-0.60 Oil. Lbd. BL15506507              HC PL FLUOTAR 10x/0.30 Ph115506181              HCX PL APO 40x/1.25 Oil Ph3 CS15506216              HCX PL FL L 63x/0.70. CORR15521505              Lichtringset f. Kondensor S23/S28156501100            Basismodul AOBS 156504750            Bedienkonsole programmierbar mit LCDs156501120            konventionelles Scanningsystem SP5 II156504500            X1 Port Emission Access156502123            Imaging Laser ROGB für AOBS156501201            Laser Port UV/405nm156502300            Imaging Laser 405nm cw 50mW156502352            AOTF UV/405156502379            UV Optik 09156504201            BF Detektor für DMI156503122            Workstation Plus 2x LCD15522023              Scanningtisch 15500138              HF-Höchstdruck-Lampe 12V 100W 156501330            SP Kanal 03156501390            Konfokal Detektor IMG15541537              C-Mount Adapter HC 0.63X15513874              Filtersystem A415513880              Filtersystem L515513888              Filtersystem Y5                                Filter N2.1                                Analyzer155933630            DMI 6000 BP CS Trino156504100            SuperZ Galvo Tisch invers15504111              Fl-Lamp Holder for DMI, straight

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

FURTHER DETAILS TO FOLLOW

Special Video and Picture Processing and Control  COMBINATION SYSTEM consisting of the following uni (more)ts: KODAK RFS 3570 PLUS FILM SCANNER for 35 mm Filmwith many OUTPUTS and INPUTS for VIDEO Signal, Lens Control , SCSI etc.with 35 mm MULTI FRAME HOLDER / ADAPTOR TRAFFISCAN III Picture Control and Processing Unit with SCSI and RS-232 for  PC- Control and transport mechanism for 35 mm FILM on ROLLthis is a special unit, which was used for Traffic Control Pictures ANALYSIS  using WINDOWS- PC with special SOFTWARE all cables for inter-connection of the KODAK RFS 3570 and the TRAFFISCAN III  are included Power Supply: 230 VAC MAINS the complete system is in used, excellent cosmetic condition and out of  operation of GERMAN GOV LAB100 % functional tested a CD with the TRAFFISCAN operation SOFTWARE will be delivered with the  system..... also a copy of instruction manual GERMAN LANGUAGEWe do NOT FULLY understand the picture analysis SOFTWARE , so the BUYER should  have the general knowledge of WINDOWS - based SOFTWAREto be able to install, test , and operate the SYSTEM FULLY

Manufacturer: Testo Model: Testo 110 Order-Nr.: 0560 1108 Description: The testo 110 temperature me (more)ter provides you with precise and reliable results and extremely accurate means of carrying out temperature measurements at extremely low temperatures. Cold storage rooms, cold storage warehouses, outdoors: the testo 110 digital temperature meter shows what it’s really made of when temperatures start to drop. Thanks to the NTC technology tucked away inside, it can measure temperatures in very low temperature environments. Features: - Extremely accurate, also in very low temperature ranges, i.e. cold storage rooms- Min/max value recognition; auto-hold, freezes the last reading- Optional connectable temperature sensor and wireless sensor for different applications in the field- Audible alarm, user-defined thresholds- Large, crisp, two-line display- HACCP compliant, certified according to EN 13485 for use in the food sector Specifications: - Measuring range: -50 to +150 °C- Accuracy: ±0.2 °C (-20 to +80 °C) ±0.3 °C Remaining Range- Resolution: 0.1 °C- Operating temperature: -20 to +50 °C- Housing: ABS- Number of channels: 1-channel- Standards: EN 13485- Battery type: 9V block battery- Battery life: 200 h (connected probe, backlight off); 45 h (radio mode, backlight off); 68 h (connected probe, backlight always on); 33 h (radio mode, backlight always on)- Storage temperature: -40 to +70 °C- Dimensions: 182 x 64 x 40 mm- Weight: 171 g Manufacturer: Testo Model: Robust air temperature probe (NTC) with fixed cable 1.2 m Order-Nr.: 0613 1712 Art.-Nr.: 000102190 YoM: 02.2017 Description: Robust and easy to use: simply hold the air temperature probe in the environment being measured – and, thanks to the exposed sensor in the probe shaft, you will obtain the air temperature value after only a short response time. The measurement result can be optimized by moving the probe through the air at approx. 1.5 m/s. The robust air temperature probe with exposed sensor (NTC) measures air temperature with a short response time. It can be connected to a wide range of measuring instruments. Features: - Short response time thanks to the exposed sensor- High level of accuracy of up to ±0.2 °C - Measuring range: -50 to +125 °C- NTC temperature sensor Specifications: - Measuring range: -50 to +125 °C- Accuracy: ±0.2 °C (-25 to +80 °C) ±0.4 °C (Remaining Range)- Reaction time: 60 s- Length probe shaft: 115 mm- Fixed cable with cable length: 1.2 m- Diameter probe shaft tip: 4 mm- Diameter probe shaft: 5 mm- Length probe shaft tip: 50 mm Items delivered: - Testo 110- Testo Robust air temperature probe (NTC) with fixed cable 1.2 m- Instruction Manual Condition: Both items are in their original packaging, in like new cosmetic condition and ready for your application.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: ASYS Hitech GmbH, Austria Model: Flexispense M - Low Volume and High Speed Dispenser T (more)ype: G 013450 S/N: 56040 Description: The optimum solution for 384 & 1536 well dispensing in HTS  applications, either integrated into fully automated systems or for use as  standalone systems. The Flexispense M is the best choice for dispensing in HTS laboratories.  The computer controlled plate centring mechanism makes plate loading for a robot very easy. A wide range of solvents, acids, bases and other aggressive  liquids can be dispensed with confidence since the liquid path is completely inert and the adjustable pump speed allows for a wide viscosity range. The  Flexispense M is also very fast, filling a 1536 well plate within 23 seconds with 5µl per well. The pressure-free ceramic piston pump system allows to switch  between different reagents using an external valve. The Flexispense M is featuring a 16 channel manifold with disposable tips for 384 and 1536 well. Features: Height adjustable 16 channel manifold for standard-well and low profile  microplates with 384 and 1536 wells Low dead volume and pump-back capability to save expensive reagents Flexible volume range from 2µl - 2.5ml per well, selectable in 0.5µl steps Long life piston pump: High precision over life time and no running cost Flexible dispensing patterns: Start and stop position as well as skipping  columns can be programmed Easy integration into robotics systems Footprint and computer interface compatible to existing, already integrated  instruments from other manufacturers: allows easy swap to Flexispense for immediate availablity of the advantages of this system Computer controlled plate centering system, Active-X controls available Complete inert liquid path: only PTFE, ceramic, PVDF and glass in contact with  liquid High dispensing speed: 22 seconds for a 384 well plate (50µl / well) 23 seconds for a 1536 well plate (5µl / well) Detachable display / keyboard unit to save valuable space for system  integration Items delivered: Asys Flexispense M Low Volume and High Speed Dispenser Power Cord Manual for Flexispense 2 & 6 available as PDF via E-Mail The device is in very good cosmetic condition and 100% functional tested.  Ready for your use!     Hersteller: ASYS Hitech GmbH, Austria Modell: Flexispense M - Low Volume and High Speed Dispenser Typ: G 013450 S/N: 56040 Beschreibung: Die optimale Lösung für das Dispensieren in 384 & 1536 Well Platten in HTS  Applikationen, entweder integriert in vollautomatischen Systemen oder zur Verwendung als standalone System. Der Flexispense M ist die beste Lösung für Dispensier ? Aufgaben in HTS Labors.  Der computergesteuerte Platten-Zentrier-Mechanismus ist für das unkomplizierte Beladen durch Robotersysteme optimiert. Da der  Flüssigkeitspfad völlig inert ist, können verschiedenste Lösungen, Basen, Säuren  und andere aggressive Flüssigkeiten ohne Bedenken dispensiert werden, die  einstellbare Pumpengeschwindigkeit schafft weitgehende Unabhängigkeit von der  Viskosität der zu dispensierenden Flüssigkeit. Mit 23 Sek. für eine 1536 Well Platte (5µl / Well) ist der Flexispense M sehr  schnell. Die druckfreie Keramik Kolbenpumpe in Verbindung mit einem externen  Ventil ermöglicht die parallele Anbindung von mehreren Reagenzien. Der  Flexispense M ist mit einem 16 Kanal Dispensierkamm mit auswechselbaren Spitzen,  für 384 und 1536 Well Platten ausgestattet. Kernmerkmale: Höhenverstellbarer 16 Kanal Dispensierkamm für Standard-Well und Low Profile  Mikroplatten mit 384 und 1536 Wells Niedriges Totvolumen und Rückpump - Funktion zur optimalen Ausnutzung des  vorhandenen Reagenzvolumens Flexibler Volumensbereich von 2µl ? 2.5ml pro Well, wählbar in 0.5µl Schritten Long Life Keramik-Kolbenpumpe: Maximale Präzision über die gesamte Lebensdauer  und dadurch keine laufenden Kosten Flexible Dispensiermuster: Start und Stop Position kann ebenso definiert  werden wie etwa das Auslassen von Reihen Leichte Integration in automatisierte Systeme Standfläche und Computerinterface kompatibel zu existierenden, bereits  integrierten Geräten anderer Hersteller: Leichter Umstieg um die Vorteile des  Flexispense M schnell zu übernehmen ist möglich. Computergesteuerter Platten-Zentrier-Mechanismus, Active-X Controls sind  verfügbar Flüssigkeitspfad völlig inert: nur PTFE, Keramik, PVDF? und Glas kommen mit  Flüssigkeit in Kontakt Hohe Dispensiergeschwindigkeit: 22 Sekunden für eine 384 Well Platte (50µl / Well) 23 Sekunden für eine 1536 Well Platte (5µl / Well) Abnehmbare Display / Tastatureinheit um wertvollen Platz für die Integration  zu sparen Lieferumfang: Asys Flexispense M Low Volume and High Speed Dispenser Stromkabel Bedienungsanleitung für Flexispense 2 & 6 verfügbar as PDF via E-Mail Der Dispenser ist in einem sehr guten Zustand und 100% auf Funkion geprüft.Bereit für Ihren Einsatz!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The pictures are sample images. Manufacturer: Cohesive Technologies Model: TurboFlow HTLC SAX 0.5 x  (more)50 mm P/N: 952810 Specification:Compound      Time Symmetry Width1. Acetone       0,985 0,705  0,2122. Butyl Paraben     1,807 0,770  0,695 Reduced plate height (acetone) = 6,4 Item delivered:- 1 x TurboFlow HTLC SAX 0.5 x 50 mm Conditionen:The column is in new condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Omni International Model: Omni-Mixer Variable-Speed Homogenizer Model No: 17106 S/N:  (more)001310 Description: The Omni Mixer is compatible with stainless steel generator probes ranging in diameter from 7 mm to 35 mm and glass, plastic or stainless steel chambers from 13 mL to 1360 mL with sealed generator probes or blades. Features: Processing Range:   0.25 mL to 10 LGenerator Probes:   7, 10, 20, 32 and 35 mmBlade Assemblies:   1" and 2" in sealed chambersPower:     600 wattSpeed:     Variable from 500 to 18,000 rpmDimensions:   Height (with stand): 24 in. (60.96 cm), Width: 10 in. (25.4 cm)Weight:    9.5kg (21lbs)Sound Level:   < 68 db Items delivered: - Omni-Mixer Variable-Speed Homogenizer - stable motor stand assembly- integrated power cord- Instruction Manual as PDF via E-Mail The omni-mixer/homogenizer is in good cosmetivc condition and 100% functional tested