All categories

Setup of 2 Vinitex 1500 walk-in fume hoods including snail shell extraction fans. Dimensions (HxWxD) (more): 2600 x 3150 (2x 1500 mm + 1x 150 mm console) x 860 mm Internal dimensions (WxD): 1400 (x2) x 760 mm

The PCR Cabinet is designed for the production of PCR and other sterile samples without contaminatio (more)n. The work area has a HEPA filtered air down flow to provide minimum of CLASS 100 Air at a laminar velocity of approx. 0.4 m/sec. The cabinet is fitted with a timer controlled U.V. light for sterilising the cabinet work-surface and equipment. A safety door is supplied to cover the work area whilst cabinet is being sterilised. The work surface is manufactured from 316 grade stainless steel for ease of cleaning. Laminar flow velocity: >0.4m/sec UV lighting 254 nm at 15 watts Dimensions (WxDxH): 63 x 55 x 90 cm Work area size: 610 x 550 mm Weight: 60 kg

dimensions: 27 x 43 x 30 cm weight: 8 kg 230V, 3A

Film formats: All formats (minimum dimensions 90 x 150 mm)

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.

0

For fluid group: 1 Capacity: 50Ltr Weight: 14.6kg Max. Operating pressure: 4bar Operating temperatur (more)e: -20 to 80°C Central opening diameter: 97mm Side openings diamter: 23mm

0

Work area: 205 x 205 mm Max 36V/4A

1×200 liter 4x SD 4000 5x SD 2000

Sold separately or in combination with article no. 5741.

Open humidity chamber. Sold separately or in combination with article no. 5729.

The Qualipak 700 is a highly-sensitive, non-destructive seal integrity and leak testing instrument w (more)ith the capability to test a wide selection of flexible packs in the food, medical and pharmaceutical industries. Using the principle of measuring changes of force generated by a pack under vacuum, the Qualipak 700’s reliable and easy to use instruments offer unique and dependable solutions to flexible package testing.

Dimensions (H x W x D): 305 x 920 x 250 mm

Will fit the VWR Standard/Advanced 5000 shakers 4 adjustable cushioned rollers to hold glassware sec (more)urely Dimensions (WxDxH): 764×459×353 mm

ElectraSyn 2.0 essentially combines three products in one and will facilitate the mass adoption of e (more)lectrochemistry for preparative organic synthesis: a potentiostat, an analytical device and a stir plate. It is a compact, user friendly and cost effective platform for organic chemists to explore electrochemistry. The ElectraSyn 2.0 Ready-To-Go package includes all that is required to for your first experiment. including a single 10 ml vial, vial holder and a set of graphite electrodes. Voltage output (electrode): 30/10 V Current output (electrode): 100 mA Speed range: 50 – 1500 rpm Setting accuracy speed: 10 rpm Stirring quantity max.(H2O): 0.1 l Speed control: Turning knob Output current resolution: 0.1 mA Output voltage resolution: 0.01 V Current measuring resolution: 0.1 mA Voltage measuring resolution: 0.1 V Current measuring accuracy: 0.1 ±mA Voltage measuring accuracy: 0.01 ±V Dimensions (WxHxD): 130 x 150 x 250 mm Weight: 3.72 kg

Principle: Airborne microorganisms are collected on microbiological agar by impaction which is achie (more)ved by aspiration. Nominal air flow rate: 100 litres of air per minute Impact speed: <20m/sec Air sample volumes: 10, 20, 30, 50, 100, 200, 500, 1000 litres are preset (standard mode), up to eight other volumes can be selected and stored in the instrument (user mode). The maximum volume of air per cycle is 1000 litre. Suitable plate diameter: 90 mm Size: 105 x 100 x 290 mm Weight: 1750 g

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg