All categories

Temperature range: 4°C to 50°C Digitally adjustable and digitally readable per 0.1°C Equipped with w (more)eek clock Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm

The TCM 3000 is a microprocessor controlled drive unit used in most comment surgery fields e.g. Skin (more) grafting, ENT, Plastic- Neuro- Hand- and Oral / Maxillo facial surgery etc.

Dimensions (HxWxD): 2050 x 600 x 520 mm

Weighing table Size: 890x600x600 (HxDxW)

Expanded bed adsorption (EBA) is a single pass operation to recover target molecules such as protein (more)s from crude stock feedstock without prior clarification. In extracellular processes, EBA is effective in capturing molecules from fermentation or cell culture. In intercellular processes with soluble molecules, it is suitable for use with broth from cell lysis or homogenization. Streamline columns are specially designed for use with Streamline adsorbents. Column design incorporates spacial flow distributors and a moveable adaptor. The distributor at the bottom of the column creates the stable fluidized bed required for the technique. The moveable adaptor allows the bed height to be adjusted for elution in sedimented bed mode. Diameter: 25 mm Column cross section: 491 mm2 Tube height: 1000 mm Stand foot print: 430 x 430 mm Sedimented bed height: 150 – 300 mm Sedimented adsorbent volume: 75 – 150 mL Max pressure: 1 bar Operating temperature: 4°C to 40°C Feed application: 200 – 400 cm/h Elution sedimented bed: 50 – 150 cm/h Elution expanded bed: 100 – 300 cm/h Chemicals used with Streamline 100 column: Acetic acid: Concentration – 25%, pH = 1.8; Time/cycle – 3 h Acetone: Concentration – 2%; Time/cycle – 15 min Ammonium sulphate: Concentration – 2 M; Time/cycle – 5 h Ethanol: Concentration – 20%; Time/cycle – 24 months Ethanol: Concentration – 70%; Time/cycle – 1 h Ethanol/Acetic acid: Concentration – 20%/10%; Time/cycle – 3 h Ethylene glycol: Concentration – 50%; Time/cycle – 3h Guanidine-Hydrochloric acid: Concentration – 6 M; Time/cycle – 5 h Glycerol: Concentration – 10%; Time/cycle – 3 h Hydrocloric acid: Concentration – 0.1 M, pH = 1; Time/cycle – 1 h Isopropanol: Concentration – 30%; Time/cycle – 3 h Sodium acetate/Ethanol: Concentration – 0.2 M/20%; Time/cycle – 24 h Sodium chloride: Concentration –  0-3 M; Time/cycle – 3 h Sodium hydroxide: Concentration – 2 M, pH = 14; Time/cycle – 24 h Sodium hydroxide: Concentration – 0.01 M, pH = 12; Time/cycle – 12 months Sodium sulphate: Concentration – 1 M; Time/cycle – 3 h Triton X 100: Concentration – 1%; Time/cycle – 5 h Tween: Concentration – 1%; Time/cycle – 5 h Urea: Concentration – 8 M; Time/cycle – 5 h

The Techne FC-200 Flow Coolers work in conjunction with a Techne thermoregulator. The bath liquid fl (more)ows through the unit which continually extracts heat from the bath fluid by means of the heat exchanger which is built into the unit. Techne FC-200 Flow coolers are designed for use when temperatures down to -20°C are required. 220V / 50-60Hz

Dimensions (HxWxD): 635 x 1100 x 595 mm Internal dimensions (HxWxD): 480 x 1003 x 463 mm Maximum vol (more)ume of the largest individual container: 21 l Maximum load capacity: 360 kg Maximum collection volume: 11 l Weight: 206 kg

All the outstanding features of the Reax Top’s “little brother” can be found in this model: a rotati (more)onal speed of up to 2,500 rpm and a 5 mm shaking orbit. The electronic speed control and the scaling of the speed display allow precise settings. Applications that require a determined speed are thus shaken more gently. Shear force-sensitive organisms remain particularly protected by the constant speed in the low range. Motion: vibrating Rotation speed range: 0 – 2,500 rpm Operating Mode: automatic or continous Orbit/Stroke: 5 mm

A motor control console designed for controlling agitation systems in Applikon bioreactors. Designed (more) for use with Applikon P100 drive motors Knob adjustment of motor speed with three digit LCD readout Interchangeable local or remote control via rear RS232 port Speed Range: Approx 0 to 230 RPM

Viscoelastic Measurement Performance 110V !!

Telepathology system consisting of: Microscope: Olympus BX51 TF (7D08475) Controller: Olympus BX-UCB (more) (7G10086) Joystick: Oasis OI-JOY3B (A-3.093) Joystick: Megatron Mach V551A15 Motorized stage: Marzhausser Objectives: Camera: Hitachi DK-H32 (J1766) Control PC: HP Pavillion PCI control board: in HP PC Analysis Intascope (200-01D6.316) Dongle: # A3557200 Monitor PC: NEC 22 “

test

Temperature range: 0°C to 50°C Dimensions (HxWxD): 1110 x 830 x 750 mm Internal dimensions (HxWxD):  (more)610 x 600 x 535 mm

Single-channel peristaltic pump combines reproducible flow rates with simple operation, either as a  (more)standalone unit, or interfaced with programmable fraction collectors. Flow rate: 0.6 – 500 ml/h Work temperature: 0 – 40°C Maximum backpressure: 2 bar Weight: 1.6 kg

Dimensions (HxWxD): 2200 x 1200 x 600 mm Open Top Internal Dimensions (HxWxD): 1280 x 570 (x2) x 545 (more)mm Closed bottom internal dimensions (HxWxD): 760 x 570 (x2) x 545 mm

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal: 134°C, 2 bar, 5.5 minutes Quick program B: 134°C, 2 bar, 3.5 minutes Quick program S: 134°C, 2 bar, 3.5 minutes Gentle program: 121°C, 1 bar, 20.5 minutes Prion program: 134°C, 2 bar, 20.5 minutes Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 18 L

Combination storage cabinet with separate storage for flammable chemicals, acids, bases and other ch (more)emicals. Maximum load shelf fire safety cabinet: 60 kg Maximum largest single storage fire cabinet: 15 L Spill tray capacity: 20 L Maximum load shelf acid/base/chemical cabinets: 80 kg Dimensions (HxWxD): 1950 x 1200 x 600 mm Internal dimensions fire safety cabinet (HxWxD): 1450 x 490 x 420 mm Internal dimensions acid/base/chemical cabinets (HxWxD): 570 x 480 x 540 mm

Seat height: 460 – 625 mm

Standing height Maximum length 7 meters 600 mm deep Possible with 750 mm deep coutertop

Dimensions (WxDxH): 600 x 490 x 430 mm

Dimensions (WxDxH): 600 x 490 x 430 mm

Dimensions (WxDxH): 600 x 490 x 430 mm

Analog heat lamp with rings set for adjustable internal diameter. Diameter: 40 – 160 mm Dimensions ( (more)H x Diameter): 275 x 210 mm