All categories

This Grant RC 1400G Recirculating Chiller was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and is in reasonable cosmetic condition with some marks from use. We tested it at multiple temperatures and it is in working order.

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requi (more)rements. The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past. The fault is unknown but could be something to do with the pocket cell. The system is comprised of; 1x High-Q femtoREGEN Laser:Model IC-1030-1000 Yb HR REG AMP SHG-THG Inside the unit:1x User Replaceable Diode Module (URDM #2506)The unit is in good cosmetic condition. 1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nmThe unit is in good cosmetic condition.

*Previously sold item, recently found in the stock count.* This Sanyo MDF-U74V VIP Series Ultra Low  (more)Temperature Freezer was removed from a university lab where it was surplus to requirements. The unit powers up and achieved -80˚C in testing. We left it on overnight. It is in good cosmetic condition with some minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor This was removed from a & (more)nbsp;lab where it was surplus to requirements. The unit has been fully tested and is in full working order up to 4400rpm. It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation. Included with it are; Sorvall Heraeus Rotor75006476Max 4400 rpm 4 x Sorvall Heraeus Buckets75006477 FMax 4400 rpm

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C This was removed fr (more)om a university lab where it was surplus to requirements. This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order. Included are; 1x Gilson XL Sampling injector:Model 231 The unit powers on and is in good cosmetic condition 2x Gilson Piston Pumps:Model 306 The units both power on and are in good cosmetic condition. 1x 15 pin MALE to FEMALE Ribbon cable:The unit is in good cosmetic condition. 1x Gilson Manometric Module:Model 805 The unit is in good cosmetic condition.There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump. 1x Gilson Dynamic Mixer:Model 811B The unit powers on and is in good cosmetic condition. 1x Gilson Temperature Regulator:Model 832 • Version 1.01The unit powers on and is in good cosmetic condition. 1x Gilson Collum Chiller:Model 7955 The unit powers on and is in reasonable cosmetic condition. 1x Gilson UV/VIS Detector:Model 119 •Version 2.01 The unit powers on and is in good cosmetic condition. 1x Gilson 506C System Interface unit:The unit is in good cosmetic condition. No sign of power. 1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)The unit is in good cosmetic condition. 1x 25pin Male to 9pin FEMALE connector adaptor.The unit is in good cosmetic condition. 1x Gilson Dilutor:Model 401 The unit powers on and is in good cosmetic condition. 1x Decade Electrochemical Amperometric Detector: ANTEC LeydenVersion 3.02The unit powers on and is in good cosmetic condition. 1x Viglen Contender PC:Model C3000A *OSWindows 98 •SoftwareUniPoint LC Version 3.01 The unit powers on. Accessories: 1x Viglen MonitorModel TS700 The unit powers on and is in good cosmetic condition. 1x Viglen KeyboardModel KB-0325 •PS/2 connector The unit is in good working and cosmetic condition  1x Microsoft Mouse:FCC ID: c3kkmp1 •PS/2 connector 1x VGA Cable:The unit is in good working and cosmetic condition. CD:1x Gilson UNIPOINT for Windows 98Version 3.0 Floppy Disk:Gilson System Software: •Version 1.71 •Disks 1 - 4Ser no. 219H8B765The units are in good cosmetic condition. •Win32s Disks 1-2The units are in good cosmetic condition. 2x Gilson 10WSC heads (cases)Ref E50056 • 3x Gilson WSC Pistion Pump Head user guides are inside the cases. 1x Gilson Thermostatic Rack Unit:Ser no. 270J1G048 The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition. Gilson Racks for the thermostatic unit. 1x Rack Well, 60x 2ml glass or plastic vials.Part no 30 1x Rack Well, 108 x 0.7ml glass or plastic vials.Part no 31 The units are in good cosmetic condition. 1x Gilson Serial Input/Output Channel: 5 sets of( 2x FEMALE to 1x MALE 9pin connectors) Manuals:1x Unipoint system software: (Folder)The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 401 Dilutor Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 231-401 Auto Sampling Injector Instruction manual:The manuals are in good condition and appear to be complete. 1x Gilson 119 uv/VIS Detector User Guide:The manual is in good condition and appears to be complete. 1x 802C. 803C, 804C Manometric Module Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 306 Piston Pump User Guide:The manuals are in good condition and appear to be complete. 3x Gilson WSC Pistion Pump Head User Guides:The manuals are in good condition and appear to be complete. 1x Gilson UNIPOINT for Windows 98 User Guide:The manual is in good condition and appears to be complete. 2x 1x Decade Electrochemical Amperometric Detector Manuals:The manuals are in good condition and appear to be complete. 1x Gilson 832 Temperature Regulator User Guide:The manual is in good condition and appears to be complete. 1x Gilson 811B Dynamic Mixer User Guide:The manual is in good condition and appears to be complete. 1x Gilson 805-806-807 Manometric Modules User Guide:The manual is in good condition and appears to be complete. 1x Gilson SC- type Piston pump head Instruction manual:The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 506 Contact/ Modem Operators Guide:The manual is in good condition and appears to be complete. Syringes: 2x Phenomenex HPLC Columns:Model SYNERGI 4U Hydro- RP 80A 1x •Size 250x4.60mm1x •Size 250x3.00mm The units are in good cosmetic condition. 1x Phenomenex HPLC Column:Model SYNERGI 4U Polar - RP 80A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u ODS (C18) 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u SILICA 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model Phenosphere - NEXT 5u C18 •Size 250x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (5u ODS) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 1x HYPERSIL (5u HyPURITY) Syringe:Prod no. 21005-022 •Size 150x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (ELITE C18 5u) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:Part no. 00G-4375-E0 •Size 250x4.60mm The units are in good cosmetic condition. 1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Phenomenex LUNA 3u c18(2) 100A Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 2x HYPERSIL 3 C18 Syringes: •Size 100x4.60mm The units are in good cosmetic condition. 1x Phenomenex BIOSep- SEC-S 200 Syringe: •Size 300x7.80mm The unit is in good cosmetic condition. 1x Phenomenex JUPITER 5u C18 300A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1802RSNE •25uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1801RSNE •10uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 801RNE WAT •10uL The unit is in good cosmetic condition.

Metrohm 870 KF Titrino Plus with 703 Ti Stand 1.703.0010 Titration System This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in very good cosmetic condition with minor marks from use. Included are; 1x Metrohm KF Titrino plusModel 870Prog version: 5.870.0025 The unit powers on and is in good cosmetic condition. The digital display is working, however, there are some signs of screen burn, thus making it a little difficult to read the screen. It is completely readable though. 1x Metrohm 703 Ti StandType: 1.703.0010The unit is in good cosmetic condition but we were not supplied with the PSU, so have been unable to power it up for testing.

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with marks from use. 4 x Shelves - 71 x 69cm Model - Revco UXFModel no. UXF50086V63SN - 0132487401131018

Faster SafeFAST Classic 212 Class 2 Microbiological Safety Cabinet This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and operates but the UV bulb will need replacing. It is in good cosmetic condition with minor marks. Operating time - 20252:04UV Hours - 4998:54

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but we were unable to test ti further at our facility. It is in good cosmetic condition with marks from use. Included with it are; 1 x Circle Seal Controls SV11A32P4P33 Solenoid Valve (plugs into back of PDS) 1 x Regulator - Tescom Model no. 44-1812-24V-147

Thermo Scientific Revco Ultima Plus ULT Freezer Model ULT3280-10HD-V43 This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. Capacity 906 Litres Internal dimensions W 99cm x L 69cm x H 1975cm Four stainless steel shelves 98cm x 68cm

Wheaton 753680-2 Reach In Incubator This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in reasonably good cosmetic condition with marks from use.

PHCBI Cooled Incubator Model Type MIR-154 Labs This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. This item requires a passcode to operate, which is available on request.

PHCBI Cooled Incubator MIR-154 Lab This item was removed from a university where it was surplus to r (more)equirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

This was removed from a university facility where it was surplus to requirements. The unit is in ful (more)l working order but has not been run since 2020. It is in good cosmetic condition with minor marks.

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine This was removed from a university facility where (more) it was surplus to requirements. The unit is in full working order but has not been run since 2020. It is in good cosmetic condition with minor marks.

This Boxer Front Loading Laboratory Steam Sterilisation Autoclave 200/35LR was removed from a univer (more)sity lab where it was surplus to requirements. Autoclave has now been fully tested by a technician and confirmed to be fully working.The only recommendation is that the safety valve is replaced prior to use. A brand new one should be fitted on installation by the new user. Internal dimensions:-Depth - 41cmWidth - 30cmHeight - 30cmHoles size on tray - 21mm

Sanyo MDF-794 Ultra Low Temperature Chest Freezer This was removed from a university lab where it w (more)as surplus to requirements. It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C. It is in good cosmetic condition with minor marks from use. Internal dimensions - L184 W50 D76cm

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where  (more)it was surplus to requirements. The system powers up but we were unable to test this further at our facility. It is in good cosmetic condition with marks from use throughout. Also included are the following:1x Circle Seal Control Solenoid3000 PSI 1x Busch PumpModel: KB 0010 D 100S/N: 01017631 1x Bio Rad PDS Voltage Converter1x USA Power Cable1x Australia/China Power Cable

Sanyo MDF-U74V Ultra Low Temperature Freezer This was removed from a university lab where it was sur (more)plus to requirements. It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C. It is in good cosmetic condition with minor marks from use.

Thermo Cytomat 2 C-LIN Automated Incubator Lab This item was removed from a university where it was  (more)surplus to requirement. The unit has been professionally serviced and is in full working order. The full-service report is available on request. This item also includes the following: 14 x Cytomat P35 Microplate Racks. 1 x Microscan MS-3-Laser BAR Code Scanner - Type FIS-0003-0007G.

Thermo Scientific Cytomat 2C-LIN Automated CO2 Incubator This item was removed from a university lab (more) where it was surplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It is in good cosmetic condition, with minor marks from use. Also Included: 2 x plate racks with 21 shallow plate spaces each.Length of CO2 hose1 x instruction manual1 x software documentation manual1 x 2 C-LIN configuration CD2 x keys for door lock2 x keys for the power switch

Varian ProStar System GC 410, PDA Detector, Solvent Delivery Module System Lab This system was  (more)removed from a university where it was surplus to requirement. All units are in good cosmetic condition and have powered on and passed self-check tests.We are unable to test them further at our facility as the system does not include a PC with relevant software. All units included are as follows: Varian ProStar Model 410 HPLC Autosampler LabP/N - 03-935290-03S/N - 20300 PDA DetectorModel - 330S/N - 00924Good condition. Solvent Delivery ModuleModel - 210S/N - 02241Good condition. Solvent Delivery ModuleModel - 210S/N - 02242Good condition.

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing LabSerial No. TBA0620110S (more)oftware Version 1.5.1-ed925b This item was removed from a university where it was surplus to requirement. It is in very good cosmetic condition and working order. (Thermometer not included.) Thaw loading temperatures -196˚C to 0˚CThaw temperatures 34˚C to 0˚C Last calibrated 19.01.23 The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab This item was removed from a univer (more)sity where it was surplus to requirement. It is in good cosmetic condition and working order, it has been tested to its MAX (4350RPM) This item also includes the following: Thermo Scientific TX-150 Swinging Bucket RotorMax speed: 5000RPMweight class: GSerial#: 75005701

Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve This was removed from a un (more)iversity lab where it was surplus to requirements. It is in a good clean used condition. Item is supplied with:1 x Armaturen ARI DP32 Valve.1 x Lightnin Model: ECI-M51- 150. Serial No. 2747863.1 x Pump TEC Electric Motor Model: MS2100l-6. Serial No. 1107-004 1949.1 x Alfa Laval Model: Unique SSV PN10. Serial No. 21127802513. Year 2011.1 x Flux F424 Seal-less Barrel Pump.Various ARI Valves & assorted Pipework. It has not been tested in any way by us. Serial No: LUB13074-7.Build date: 2012.Volume: 360 Ltr.Construction Category: G.E.P. Tested March 2012.Material: 304 Stainless steel.

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use. Max RPM-1800 Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes. Centrifuge model number- VR maxi-1Centrifuge serial number- 804040235 Freeze dryer model number- CT/DW 110Freeze dryer serial number- 804050097 Maxi dry model number- MAXI-DRY PLUSMaxi dry serial number- 804060037

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

FluidX X-Seal Automated Thermal Sealer with Bambi VT75 Compressor This was removed from a university (more) lab where it was surplus to requirements. The system all powers up and is in very good cosmetic condition with only minor marks. The system is operational. - The sealing count is 1402 Included with it are; Bambi VT75 CompressorS/N: VT75-00437 52x42x61 cm28.08 Kg 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 1x Roll of FluidX Adhesive PCR FoilP/N: 40-1009 1x Roll of FluidX Chrystal Clear SealP/N: 43-1008 1x Roll of KBiosciences Peel SealP/N: KBS-0601-001 3x Roll of KBiosciences Clear Weld Seal Mark IIP/N: KBS-0607-002