52k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

ABS 23 Cu. Ft. Glass Door Pharmacy Refrigerator PH-ABT-NSF-23G

UsedAmerican BioTech SupplyMedical equipment - otherUnited States

From€5,927.87excl. VAT

In stock

Can't find what you're looking for?

DESCRIPTION
SINGLE GLASS DOOR PHARMACY/VACCINE UPRIGHT REFRIGERATOR
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
23 CU. FT. GROSS VOLUME
DOOR
ONE SWING GLASS DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
SEVEN SHELVES (SIX ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
All 25 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 25

Brands
American BioTech Supply
New/Used
Used
DESCRIPTION
SINGLE GLASS DOOR PHARMACY/VACCINE UPRIGHT REFRIGERATOR
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
23 CU. FT. GROSS VOLUME
DOOR
ONE SWING GLASS DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
SEVEN SHELVES (SIX ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING
3 1/2" SWIVEL CASTORS(TWO LOCKING)
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (3/4") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
26 7/8"
EXTERIOR DEPTH
34 3/4"
EXTERIOR HEIGHT
81 3/4"
PRODUCT WEIGHT
302 LBS.
SHIPPING WEIGHT
342 LBS.
RATED AMPERAGE
3 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED WITH THE TEMPERATURE PERFORMANCE REQUIREMENTS AS DEFINED IN THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE FOR ALL TESTING SCENARIOS. UL, C-UL, ETL, C-ETL LISTED AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

23 cu. ft. pharmacy refrigerator with glass door, NSF/ANSI 456 certified, microprocessor control, and temperature alarms.

General Features:

  • Designed according to NSF/ANSI 456 for vaccine storage with temperature range 2°C to 8°C (36°F to 46°F)
  • Gross volume capacity: 23 cu. ft.
  • One self-closing, right-hinged swing glass door with magnetic gasket and keyed lock
  • Interior: Seven shelves (six adjustable, one fixed) with guard rails
  • Mounted on 3.5" swivel casters (two locking)
  • Full coverage, shielded, switched LED interior lighting with balanced spectrum
  • Forced air technology for airflow management (patent pending)
  • Rear external probe access port (3/4" diameter)
  • Cabinet insulated with foam-in-place, high-density urethane foam (EPA compliant)
  • Exterior made of white powder-coated steel
  • Compatible with PYXIS®, Omnicell®, and Acudose Rx® access control systems

Certifications and Compliance:

  • Certified to NSF/ANSI 456 for vaccine storage temperature requirements
  • UL, C-UL, ETL, C-ETL listed and certified to UL471 standard
  • Hydrocarbon refrigerant safety certified
  • Uses EPA SNAP compliant R290 (propane) refrigerant, HFC-free for environmental health and energy efficiency

Electrical and Warranty:

  • Rated amperage: 3 Amps, 110-120V AC, 15 A minimum facility requirement
  • Power cord with NEMA 5-15 plug, UL471 compliant
  • Includes temperature monitor device (TMD) meeting CDC guidelines with 3-year calibration certification
  • Two years parts and labor warranty (excluding display probe calibration)
  • Five years compressor warranty

Refrigeration System:

  • Hermetic, high performance compressor
  • Fin and tube condenser and evaporator with high efficiency fans
  • Cycle optimized, zero energy defrost

Performance Specifications:

  • Temperature uniformity: ±1.0°C
  • Stability: ±1.1°C
  • Maximum temperature variation: ±1.4°C
  • Temperature rise after 8-second door openings did not exceed 6.7°C in all test protocols
  • Recovery to under 8°C within 6.5 minutes after 3-minute door openings
  • Energy consumption: 1.32 kWh/day
  • Average heat rejection: 2.21 kWh/day (315 BTU/hr)
  • Noise level: ≤49 dBA
  • Pull down time to 4°C: 30 minutes
  • Performance data tested at 22°C ambient using NSF/ANSI 456 validation probes

Temperature Controller:

  • Parametric microprocessor controller with LED display, 0.1°C resolution
  • Digital temperature display and alarm module compliant with NSF/ANSI 456, battery backup, F/C switchable
  • Temperature setpoint range: 1°C to 10°C (fixed settings to maintain certification)
  • Calibrated stainless steel display probe
  • Remote alarm contacts with state switching
  • Visual and audible alarms for high and low temperature per NSF/ANSI 456 requirements

Physical Dimensions & Shipping:

  • Exterior dimensions (W x D x H): 26 7/8" x 34 3/4" x 81 3/4"
  • Product weight: 302 lbs; shipping weight: 342 lbs

Included Accessories:

  • Temperature monitor device (TMD) with buffered probe in simulated product solution
  • Pharmacy refrigerator/freezer toolkit and temperature logs

Shipping Options:

  • Multiple LTL shipping options available including dock-to-dock, liftgate delivery, threshold delivery, and inside delivery with placement and unpacking services (end user responsible for electrical connection and temperature settings)

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 7 November 2026