58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

American BioTech Supply 1 Cu Ft Vaccine Refrigerator PH-ABT-NSF-UCFS-0104-LH

UsedAmerican BioTech SupplyMedical equipment - otherUnited States

From€3,142.13excl. VAT

In stock

Can't find what you're looking for?

OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
1 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, LEFT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING AND INSTALLATION
LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION
All 24 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 24

Brands
American BioTech Supply
New/Used
Used
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
1 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, LEFT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING AND INSTALLATION
LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (23/32") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
17 1/4"
EXTERIOR DEPTH
19 1/4"
EXTERIOR HEIGHT
21 1/4"
PRODUCT WEIGHT
66 LBS.
SHIPPING WEIGHT
94 LBS.
RATED AMPERAGE
0.9 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

1 cu ft countertop vaccine refrigerator with microprocessor control, HFC-free refrigerant, LED lighting, and NSF/ANSI 456 certification.

  • Capacity: 1 cu ft gross volume
  • Design Standards: Compliant with NSF/ANSI 456 for vaccine storage
  • Temperature Range: 2°C to 8°C (36°F to 46°F)
  • Door: One solid, self-closing left-hinged door; magnetic sealed gasket; keyed lock; non-reversible
  • Shelves: Three shelves (two adjustable, one fixed) with back guard rail
  • Construction: White powder coated steel exterior; foam-in-place high-density urethane insulation (EPA compliant)
  • Airflow: Forced air technology (patent pending)
  • Lighting: Shielded, switched LED with full coverage and balanced spectrum
  • Probe Access: Rear wall port (23/32" diameter) with included calibrated stainless steel probe
  • Temperature Control: Parametric microprocessor controller with LED display, 0.1°C resolution
  • Alarms: High/low temperature alarms; remote alarm contacts compliant with NSF/ANSI 456 standards
  • Refrigeration System:
  • Compressor: Hermetic, high performance
  • Refrigerant: EPA SNAP compliant R600a (Isobutane), HFC-free
  • Condenser: Tube and grid construction, fanless
  • Evaporator: Plate wall
  • Defrost: Cycle optimized, zero energy
  • Performance:
  • Uniformity ±1.5°C; Stability ±0.7°C; Max temp variation ±1.8°C
  • Temperature rise after 8 sec door opening ≤6.8°C
  • Recovery to under 8°C after 3 min door opening within 5.5 min
  • Energy consumption: 0.71 kWh/day; average heat rejection 1.01 kWh/day (237 BTU/h)
  • Noise level ≤34 dBA
  • Pull down time: 35 min to nominal operating temperature
  • Dimensions: 17 1/4" W x 19 1/4" D x 21 1/4" H
  • Weight: 66 lbs product weight, 94 lbs shipping weight
  • Electrical: 110-120V AC, 0.9 Amps, NEMA 5-15 plug, UL471 compliant power cord with vaccine storage warning label
  • Installation: Leveling legs; 4" clearance required on all sides for ventilation; indoor use; optimal ambient 18°C to 26°C (65°F to 78°F), <70% RH
  • Compatibility: Access control systems pyxis®, omnicell®, and acudose rx® compatible
  • Warranty: 2 years parts and labor (excluding display probe calibration), 5 years compressor warranty
  • Certifications: NSF/ANSI 456 standard, UL, C-UL, ETL, C-ETL listed; certified to UL471; hydrocarbon refrigerant safety certified
  • Included Accessories: Calibrated buffered probe with 3 years certification of calibration; min/max temperature memory; field-installable visual and audible temperature alarm
  • Additional Info: Multiple shipping options available including dock to dock, liftgate, threshold, and inside delivery with installation assistance.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026