58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

ABS 1 Cu. Ft. Glass Door Vaccine Refrigerator Certified to NSF/ANSI 456

UsedAmerican BioTech SupplyMedical equipment - otherUnited States

From€2,945.02excl. VAT

In stock

Can't find what you're looking for?

DESCRIPTION
SINGLE GLASS DOOR PHARMACY/VACCINE COUNTERTOP REFRIGERATOR FREESTANDING
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
1 CU. FT. GROSS VOLUME
DOOR
ONE SWING GLASS DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
All 25 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 25

Brands
American BioTech Supply
New/Used
Used
DESCRIPTION
SINGLE GLASS DOOR PHARMACY/VACCINE COUNTERTOP REFRIGERATOR FREESTANDING
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY. OPTIMAL OPERATING RANGE: +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
1 CU. FT. GROSS VOLUME
DOOR
ONE SWING GLASS DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING AND INSTALLATION
LEVELING LEGS. NOTE: 4" OF CLEARANCE ON ALL SIDES MUST BE MAINTAINED FOR ADEQUATE VENTILATION
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (23/32") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
17 1/4"
EXTERIOR DEPTH
19 1/4"
EXTERIOR HEIGHT
21 1/4"
PRODUCT WEIGHT
66 LBS.
SHIPPING WEIGHT
94 LBS.
RATED AMPERAGE
0.9 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

1 cu.ft. countertop vaccine refrigerator with glass door, microprocessor control, NSF/ANSI 456 certified.

  • Certification: Meets NSF/ANSI 456 Standard for Vaccine Storage; UL, C-UL, ETL, C-ETL listed; UL471 Certified; hydrocarbon refrigerant safety compliant.
  • Capacity & Dimensions: 1 cu.ft. gross volume; 17 1/4" W x 19 1/4" D x 21 1/4" H; product weight 66 lbs, shipping weight 94 lbs.
  • Construction: White powder coated steel exterior; foamed-in-place EPA-compliant high-density urethane insulation; single right-hinged, non-reversible swing glass door with magnetic gasket and keyed lock.
  • Shelving: Three shelves (two adjustable, one fixed) with guard rail on back.
  • Temperature Control: Parametric microprocessor controller with LED display (0.1°C resolution); factory-set 1°C to 10°C range to comply with NSF/ANSI 456; calibrated stainless steel display probe; remote alarm contact capability; visual and audible alarms for high/low temperature.
  • Performance:
  • Compressor: Hermetic, high performance
  • Refrigerant: R600A (Isobutane), EPA SNAP compliant, HFC-free
  • Condenser: Tube and grid, fanless
  • Evaporator: Plate wall
  • Defrost: Cycle optimized, zero energy
  • Temperature uniformity ±1.5°C; stability ±0.7°C; max variation ±1.8°C
  • Recovery after 3-minute door opening under 8°C within 5.5 minutes
  • Energy consumption 0.71 kWh/day; heat rejection 1.01 kWh/day (237 BTU/hr)
  • Noise level ≤34 dBA
  • Pull down time to operating temp ~35 minutes
  • Airflow & Lighting: Forced air technology (patent pending); shielded, switched full-coverage LED interior lighting.
  • Installation: Indoor use ambient 18°C to 26°C (65°F to 78°F), <70% RH; leveling legs; 4" ventilation clearance required on all sides.
  • Additional Features: External rear probe access port (23/32" diameter); compatible with PYXIS®, Omnicell®, and Acudose Rx® access controls; includes CDC guideline-compliant Temperature Monitor Device (TMD) with 3-year calibration certification, buffered probe, min/max memory, visual and audible alarms; pharmacy refrigerator/freezer toolkit and temperature logs included.
  • Electrical: 110-120V AC, 15A minimum; NEMA 5-15 plug; UL471 compliant power cord with vaccine storage warning label.
  • Warranty: Two years parts and labor (excluding display probe calibration); five years compressor warranty.
  • Performance Testing: Data acquired at 22°C ambient with NSF/ANSI 456 compliant validation probes under stabilized steady state conditions.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026