Laboratory equipment

Dimensions (WxHxD): 600 x 460 x 580 mm

Dimensions (WxHxD): 900 x 600 x 580 mm

Dimensions (HxWxD): 1750 x 860 x 520 mm

Dimensions (HxWxD): 1920 x 1200 x 560 mm

Interfurn Hanging Cabinet Sliding Door Blue 1460x600x330

S+B End Sink Set Island Tabel White 1500 wide

Equipped with non-slip rubber mats on the shelves.

WRT Laborbau Fumehood 1800

Vinitex Door cabinet high LT White 600

Vinitex 3 Drawer cabinet low White

S+B Door cabinet low LT White 600

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm Maximum print width: 203 dpi – 104 mm, 300 dpi – 106 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 109 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 295 x 272 x 477 mm Weight: 12.4 kg

Capacity: 6100g Readability: 1 g Dimensions (WxDxH): 195 x 315 x 90 mm Weighing platform (WxD): 185  (more)x 230 mm

Temperature Range: Ambient +5°C to 130°C Heating Rate: ≤ 25 min. 30° to 130°C Block capacity: 4 (not (more) included) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 450 x 200 x 100 mm Weight: 4.7 kg

TSP HPLC P4000 + AS3000

Type of movement: orbital Shaking stroke: 4.5 mm Permissible ON time: 100 % Speed range: 200 – 2500  (more)rpm Speed display: scale Operating mode: continuous operation Touch function: yes Dimensions (WxHxD): 115 x 80 x 230 mm Weight: 3.2 kg

Dimensions (HxWxD): 1841 x 660 x 683 mm Internal dimensions drawer (HxWxD): 190 x 465 x 400 mm Capac (more)ity: 305 L

Capacity: 3100 g Readability: 0.1 g Repeatability: 0.05 g Linearity: ± 0.1 g Taring range: 0 – 3100  (more)g Stabilization time: 1 – 2 s Dimensions (WxDxH): 204 x 385 x 90 mm Weighing platform dimensions (DxW): 204 x 204  mm Weight: 6.2 kg

Downflow velocity: 0.35 m/s Sound level: < 58 dBA Light intensity: > 800 lux Pre-filter (EN 779): G4 (more) Horizontal HEPA filter (EN 1822): H14 Dimensions (WxDxH): 1595 x 740 x 1360 mm Interior dimensions (WxDxH): 1495 x 600 x 685 mm Height with support frame: 2240 mm Aperture height (work mode/maximum): 165/375 mm Weight: 200 kg

Temperature range: RT +5 to 95°C and heat setting Capacity: 14 liters Dimensions bath (LxWxH): 350 x (more) 290 x 140 mm Basic temperature controller Stainless steel housing and interior Weight: approx. 15 kg

Temperature range: Ambient + 5°C to 80°C Temperature uniformity: 1.0°C Temperature stability: 0.1°C  (more)Dislay resolution: 0.1°C Exterior dimensions (WxDxH): 404 x 594 x 216 mm Interior dimensions (WxDxH): 305 x 434 x 152 mm Volume: 20 L Weight: 10 kg

Downflow velocity: 0.35 m/s Sound level: < 58 dBA Light intensity: > 800 lux Pre-filter (EN 779): G4 (more) Horizontal HEPA filter (EN 1822): H14 Dimensions (WxDxH): 1900 x 740 x 1360 mm Interior dimensions (WxDxH): 1800 x 600 x 685 mm Height with support frame: 2240 mm Aperture height (work mode/maximum): 165/375 mm Weight: 230 kg Filter check is ok, but has a stain.

Seal apparatus

Max RCF: 20913 x g Max RCF with fixed angle rotor: 20913 x g Max RCF with swing-bucket rotor: 4500 x (more) g Max RCF with plate rotor: 3486 x g Speed: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Max capacity: 4x 750 mL/4x 4 MTP Acceleration/braking ramps: 9/9 Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-62 Swing-out rotor (max 4000 rpm) 4x Eppendorf microplate carrier 2x Eppendorf bucket 2x Eppendorf insert (3x 50 mL falcon tube capacity)

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-ti (more)me and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications. Advanced software and instrumentation for performing a wide array of genomic assays Sensitive 4-color optical LED recording system Intuitive and robust software perfect for both first-time and advanced users Simple and flexible instrument set-up and usage New StepOne Software The StepOne Software included with the StepOnePlus Real-Time PCR System runs on the Windows XP operating system and provides instrument control, data collection, and data analysis capabilities (analysis software is also compatible with Windows 7). This latest version includes capabilities to collect melt curve data for High Resolution Melt (HRM) applications and the option to export in Real-Time PCR Data Markup Language (RDML) for compatibility with MIQE guidelines. Rapid and Simple Assay Set-Up This remarkably simple Real-Time PCR system is designed with an LCD touchscreen and a user-friendly interface that brings the power of genetic studies to researchers new to Real-Time PCR. The intuitive software and protocol wizards help guide new users through their Real-Time PCR experiments. The StepOnePlus Real-Time PCR System also includes a quick-start setup so that you start a run immediately and enter plate information at a later time. Sensitive LED-Based 4 Color Fluorescence Reading The StepOnePlus Real-Time PCR System utilizes a long-life LED-based optical system that can record fluorescence from FAM/SYBR Green, VIC/JOE, NED/TAMRA, and ROX dyes. This cost-effective, 4-color, 96-well system delivers precise, quantitative Real-Time PCR results and saves data from all filters in every run without depending on a computer or plate setup. It can discriminate between 2 populations of 5,000 and 10,000 template copies of a TaqMan assay with 99.7% confidence. Compatible with Many Genomic Analysis Techniques Perform a variety of standard and demanding genetic analysis research techniques on one instrument using the user friendly StepOnePlus Real-Time PCR System and StepOne Software. The StepOnePlus System supports many Real-Time PCR applications, including the following: SNP Genotyping Gene Expression Analysis MicroRNA Expression Protein Expression Translocation Analysis Gene Detection Viral Load Analysis The included StepOne Software supports a variety of analysis methods , including the following: Standard Curve (absolute quantitation) Relative Standard Curve Comparative Ct (ΔΔCt) (relative quantitation) Genotyping and Presence/Absence Melt Curve Analysis (as a standalone application) High Resolution Melting (as a standalone applications)