Laboratory equipment

Interfurn Double door Cream 1200x600x490

Dimensions (WxDxH): 600 x 490 x 600 mm

Dimensions (HxWxD): 600 x 1200 x 330 mm Internal dimensions (HxWxD): 550 x 570 (x2) x 270 mm

Interfurn Door Cabinet, RT Creme 600x600x490

Interfurn Door Cabinet (Sink) Creme

Dimensions (WxDxH): 600 x 490 x 600 mm

Potteau Electric Bridge 3 Meter

S+B Pass-Through Glass Sliding Door White 1200x340x450

S+B Hanging cabinet D. Gray 1200x330x600

The Applied Biosystems QuantStudio 3 Real-Time PCR System is designed for users who need an affordab (more)le, easy-to-use real-time PCR system that doesn’t compromise performance and quality. The simplified Design and Analysis software is ideal for both first-time and experienced users. Using proven OptiFlex technology (featuring four coupled channels and white LED) and featuring three independent Veriflex temperature zones, the QuantStudio 3 system enables improved data accuracy and sensitivity for a broad range of genomic applications. Sample capacity: 96 wells Reaction volume: 0.1 mL block, 10–30 μL Excitation source: Bright white LED Optical detection: 4 coupled filters Excitation/detection range: 450–600 nm/500–640 nm Multiplexing: Up to 4 targets Maximum block ramp rate: 0.1 mL block, 9.0°C/sec Average sample ramp rate: 3.66°C/sec Temperature uniformity: 0.4°C Temperature accuracy: 0.25°C Compatible dyes: FAM/SYBR Green, VIC/JOE/HEX/TET, ABY/NED/TAMRA/Cy 3, JUN, ROX/Texas Red Security, auditing, and e-signature (SAE) features: No

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

Principle: Any positive and untouched isolation can be performed to separate target cells from PBMCs (more), cultured cells, and dissociated tissue. In addition, cells can be directly isolated from whole blood or bone marrow using StraightFrom Whole Blood MicroBeads. Overall more than 400 different MicroBeads and Isolation Kits are available. Upon automated separation, labeled cells as well as non-labeled cells are obtained and can be used for a variety of downstream applications such as functional and molecular assays, chimerism analysis, and flow cytometry. To ensure cell viability and integrity, cells are kept cooled in Chill Racks. Monitoring: Pre-set programs for all MACS MicroBeads and Isolation Kits ensure accurate sample handling. Sensors constantly monitor the status of the autoMACS Pro, buffer levels, and column status. This ensures optimal instrument performance and safety of samples and operators. Footprint: With MiniSampler: 605×455 mm (W x D) Height: 392.5-454 mm (adjustable touchscreen) It is a benchtop-sized instrument that will easily fit under a common laminar flow hood. Included Chill Racks: The Chill Racks are pre-cooled in the refrigerator (2–8°C). The special coolant contained in the racks switches from fluid to solid at 8°C and maintains a low temperature until the coolant is completely melted. The phase switch is visible. Do not cool racks below 0°C as cell samples may freeze! 1x Reagents rack 1x Chill 5 Rack: contains 24 slots for 5 mL tubes and can be used for cell separations of up to 6 samples. 4x Chill 15 Rack: contains 15 slots for 15 mL tubes and 5 slots for 5 mL tubes. It can be used for cell separations of up to 5 samples. 1x Chill 50 Rack: contains 6 slots for 50 mL tubes, 3 slots for 15 mL tubes, and 3 slots for 5 mL tubes. Up to 3 cell samples can be handled with a Chill 50 Rack.

The Siemens KT16RVW30 is a table-top refrigerator with a surprisingly large capacity of 152 liters.  (more)Dimensions (HxWxD): 850 x 600 x 610 mm Net capacity: 152 l

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

The Agilent xCELLigence Real-Time Cell Analysis (RTCA) SP instrument uses label-free cellular impeda (more)nce to continuously monitor cell health, behavior, and function with high accuracy, sensitivity, and reproducibility. The SP model can run a 96-well electronic microplate (E-Plate 96), which is ideal for cell health characterization, immune cell-mediated killing, viral cytopathic effects, cytotoxicity, cell adhesion, cell barrier function (TEER), cell signaling (e.g., GPCR) and other related applications. xCELLigence RTCA SP model can run one 96-well plate Measure cell health, viability, or response to treatments with high sensitivity, accuracy, and reproducibility Obtain continuous data at high temporal resolution (from seconds to days), with non-invasive and label-free real-time impedance technology Easy workflow allows users to simply add cells to E-plates and begin kinetic measurements at physiological conditions, with minimal hands-on time Intuitive RTCA Software Pro allows for analysis of real-time data to generate diverse plot types and automatically calculate parameters such as % of cytolysis, IC50 or KT50 RTCA Software Pro supports FDA 21 CFR Part 11 compliance to ensure electronic data integrity

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Max. pumping speed at 50 Hz: 1 m³/h Ultimate pressure: < 100 mbar Sound level: < 45 dB Dimensions (W (more)xDxH): 144 x 198 x 244 mm Weight: 2.7 kg

Modes DOS: Dosing with the ability to calculate a result from dosed volume DIS R: Repetitive dispens (more)ing DIS C: Cumulative dispensing PIP: Pipetting DIL: Diluting CNT D: Preparation of solutions with preselected content Volume of buret cylinder: 10 ml Resolution: 10 000 steps per buret cylinder Dispensing time for 100% burette volume: Analogue – 20 s to 17 min, Digital – 20 s to 17 h Dimensions (WxHxD): 240 x 450 x 275 mm Weight: 5.2 kg

Temperature range: Ambient +5°C to +70°C Capacity: 57 liters Dimensions (WxDxH): 750 x 610 x 550 mm  (more)Internal dimensions (WxDxH): 405 x 370 x 380 mm

testo 110 Thermometer 0560 1108 with Waterproof probe (NTC) 0613 1212 0560 1108 Highly accurate even (more) at very low ambient temperatures, such as in cooling rooms Optional: connectable sensor and wireless sensor for various applications Audible alarm, adjustable limit values HACCP certified according to EN 13485 for use in the food sector Dimensions: 182 x 64 x 40 mm Operating temperature: -20 … +50 ° C Housing: ABS Number of Channels: 1 channel Battery Type: 9V battery Storage temperature: -40 … +70 ° C Weight: 171 g 0613 1212 – Waterproof immersion/penetration probe (NTC) with fixed cable 1.2m NTC temperature sensor Waterproof Measuring accuracy of up to ±0.2 °C Measuring range: -50 to +150 °C This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.

Motion: reciprocating (horizontal) Shaking platform: 400 x 300 mm Max. load: 15 kg Shaking speed: 30 (more) – 420 rpm, in steps of 5 Stroke: 17 mm Runtime: programmable / continuous Dimensions (WxDxH): 510 x 490 x 150 mm Weight: 19 kg

High-performance ultrasonic cleaner with heating for use in the practice, laboratory and workshop. T (more)he proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects. A user-friendly rotary handle control is used for easy setting of the cleaning time and bath temperature. The fully automatic SweepTec function prevents standing waves in the ultrasonic field and achieves particularly even cleaning. Ultrasound frequency: 35 kHz Temperature setting: 30°C – 80°C Time setting: 1-15 min, continuous operation Capacity: 45 L Work content: 30 L Level marking: yes Tub material: Stainless steel V2A (1 4301) Tub thickness: 2 mm Inner dimension (LxWxH): 500 x 300 x 300 mm Dimension (LxWxH): 540 x 340 x 500 mm Included Cover: A suitable stainless steel lid for an ultrasonic bath protects the bath fluid from external contamination and prevents odour nuisance caused by the added cleaning or disinfecting preparations. In addition, the noise emission that may be perceived as annoying during operation of the ultrasonic cleaner is reduced. The lids are designed in such a way that any condensation water that arises is led back into the tank. Hanging basket: For holding sound reinforcement material; made of stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Sieve holder: For cleaning test sieves in an ultrasonic bath; stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Insert strip: The insert strip is used to hold the insert vessels. When using chemically aggressive liquids (e.g. TICKOPUR J 80 U), removing chemically aggressive or abrasive contaminants or sonicating sample liquids, insert cups are used (indirect sonication). Because nothing may be placed on the bottom of the ultrasonic bath. Another advantage: When using an insert strip, several insert beakers can be sonicated with different liquids at the same time (e.g. removal of dental cements with STAMMOPUR Z in one and cleaning with simultaneous chemical disinfection of dental instruments with STAMMOPUR DR 8 in a second insert beaker). Please note that the surface tension of the water must be reduced in order to transfer the ultrasound to the insert vessel and therefore a cleaning solution (e.g. TICKOPUR R 33 – 3%) must be used as a coupling liquid / contact liquid.

Dimensions (WxDxH): 1500 x 800 x 710 mm

Leica 2035 BioCut Microtome its the perfect manual microtome if your applications involve routine se (more)ctioning of paraffin or plastic-embedded specimens. You can be assured stability when operating the Leica BioCut 2035 Microtome thanks to the vertical guide-way, the rigidity of the feed-system as well as the a built-in specimen retraction feature. The combination of these features along with a mechanical trimming device should make the Leica 2035 the ideal microtome for manual sectioning. Section range: 1 – 60 µm Trimming at 15 an 30 µm Smooth hand-wheel rotation Easy Specimen cassette orientation Low/High profile disposable blades holder

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm

Dimensions (HxWxD): 2060 x 1400 x 620 mm