LAUDA RA 12 Cooling thermostat

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Heating thermostat Alpha: from 25 to 100°C LAUDA Alpha is the most affordable choice when it comes t (more)o high quality LAUDA thermostats. These reliable and easy-to-use thermostats, with features reduced to the essentials, can be operated with non-flammable liquids and are suitable for both indoor and outdoor temperature control tasks. The cooling system, the pump circulation set and the bath cover set are available as accessories for all thermostats. With the water cooling system, the thermostat can be used for operations from 20° to 100°C. Low-level and overtemperature protection for operation with non-flammable liquids. Qualitative characteristics - Simple and intuitive menu navigation with three-button operation via a large, clearly legible LED display - Integrated timer function to allow automatic shutdown of the device - Under / over temperature protection for operation with non-flammable liquids The back of the Alpha thermostat: clamp, power supply and reset button. Simple control with three buttons and three indicator lights: active heating, active cooling and alarm light. Can be used with any bath vessel up to 30 mm thick with the included screw clamp. Graph of pump characteristics in Alpha Lauda models. Graph of heating curves of Aplha Lauda models. TECHNICAL VISUALIZATION a - Control head with clamp b - Bath vessel c - Four mounting feet 1 - Temperature controller with four segment LED display 2 - Heater active (yellow LED is lit) Cooler active (blue LED is lit) Error signal (red LED is flashing) 3 - Menu functions, select and Enter keys 4 - Mains switch 5 - Screw clamp 6 - Tubular heater 7 - Temperature probe Pt100 8 - Pump outflow with pump outflow reducer 1 - Reset button (press only if the display shows SAFE ) 2 - Cooler cable 3 - Rating label 4 - Mains cable 5 - Screw clamp

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PVL 15 model - Tank volume min. 11 L - Tank volume max. 15 L - Tank opening 230 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 100°C - Operating temperature range from -60°C to 100°C - Pump connectors M16 x 1 - Fitting 13 Ø

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

This Avestin Emulsiflex B15 EF-B15 Homogeniser was removed from a university lab where it was surplu (more)s to requirements. We were unable to test this unit at our facility as it requires compressed air to operate it. It is in good cosmetic condition with minor marks from use.

Genevac miVac Centrifugal Concentrator System Lab This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). We are unable to test the system further at our facility. System includes the following: 1x Genevac miVac Control BoxType: 600037-05S/N: 084655 1x Genevac miVac PumpM/N: QUP-23050-A00S/N: QUP-230090077 1x Genevac miVac SpeedtrapM/N: MST-23050-A00S/N: MST02090324 1x Genevac miVac ConcentratorM/N: DUC-23050-A00S/N: DST02090233 1x Rotor 8x50ml tubesP/N: DRC-50CCT-008 1x Rotor 84x1.5ml tubes (fitted)P/N: DRC-15EPP-084 1x Genevac miVac Pressure Controller Manual

Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite Ob (more)jectives S-APO 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-3D is an advanced trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and a sophisticated reflected frame for 3D profiling. It features a motorized Z-axis, a 3D control box, and a control pad, along with widefield eyepieces offering 10X magnification and a 25mm field of view. The coded quintuple revolving nosepiece supports bright field observation and includes a slot for Differential Interference Contrast (DIC). Plan S-APO objectives are available in magnifications of 5X, 10X, 20X, and 50X. INCLUDED: The Motic PA53MET-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO Objectives: 5X, 10X, 20X, & 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty