58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Motic MOTICAM S1 Microscope Camera with Back-Illuminated sCMOS Sensor

UsedMoticMicroscope accessoriesUnited States

From€435.9excl. VAT

In stock

Can't find what you're looking for?

Sensor Type
sCMOS
Sensor Size
1/3"
Imaging Area
6.09mm (Diagonal)
Capture Resolution Info
1.2MP
Live display mode through USB (pixels)
1280x960, 640x480
All 23 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 23

Brands
Motic
New/Used
Used
Sensor Type
sCMOS
Sensor Size
1/3"
Imaging Area
6.09mm (Diagonal)
Capture Resolution Info
1.2MP
Live display mode through USB (pixels)
1280x960, 640x480
Pixel size
3.75x3.75μm
Scan mode
Progressive
Shutter mode
Rolling Shutter
Data transfer
USB 3.1
Max. frames per second (fps*)
1280x960 @ 120fps, 640x480 @ 240fps
Exposure time
15 μsec to 2 sec
Operating temperature
From -10 to +60 Degrees Celsius non condensing
Sensitivity
2350mV(G) @ 1/30 sec
Support device
TWAIN, SDK and DirectShow Driver
Supported OS
Microsoft Windows 7/8/10, MAC OSX, Linux or higher
Minimum computer requirements
2GHz dualcore - RAM memory 2GB - Video memory min. 512 MB
Lens mount
C-Mount
Software
Motic Images Plus 3.0 for Windows, OSX and Linux
Functions
Still image and video capture, live and still image measurement, image adjustments, white balance, automatic & manual exposure, individual objective calibration system
Power supply
5V (from USB Port)
Package includes
CS ring adaptor, USB 3.1 cable, Motic 4-dot calibration slide, Motic Images Plus 3.0 for Windows/OSX/Linux

Product description

Entry-level back-illuminated sCMOS microscope camera supporting up to 120 fps via USB 3.1, 1.2MP resolution.

The Moticam S1 is an entry-level microscope camera featuring:

  • Sensor Type: Back-illuminated sCMOS sensor
  • Sensor Size: 1/3 inch
  • Imaging Area: 6.09 mm diagonal
  • Resolution: 1.2 megapixels
  • Pixel Size: 3.75 x 3.75 μm
  • Scan Mode: Progressive
  • Shutter Mode: Rolling Shutter
  • Data Transfer: USB 3.1 interface
  • Max Frame Rate: 1280x960 resolution at 120 fps; 640x480 at 240 fps (under optimal conditions)
  • Exposure Time: Adjustable from 15 μsec to 2 seconds
  • Operating Temperature: -10 to +60 °C, non-condensing
  • Sensitivity: 2350 mV(G) at 1/30 sec exposure
  • Lens Mount: C-Mount compatible
  • Software Support: Motic Images Plus 3.0 for Windows, OSX, Linux; includes TWAIN, SDK, and DirectShow drivers
  • Supported Operating Systems: Windows 7/8/10, Mac OSX, Linux or higher
  • Minimum Computer Requirements: 2 GHz dual-core processor, 2 GB RAM, minimum 512 MB video memory
  • Supported Functions: Still image and video capture, live and still image measurements, image adjustments, white balance, automatic and manual exposure, individual objective calibration system
  • Power Supply: Powered through 5V USB Port
  • Package Contents: CS ring adaptor, USB 3.1 cable, 4-dot calibration slide, Motic Images Plus 3.0 software

This camera provides a high-framerate imaging solution optimized for professional microscopy image capture and analysis.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026