51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Motic MOTICAM PRO S5 Lite Microscope Camera with 5MP Global Shutter Sensor

From€2,085.27excl. VAT

In stock

Can't find what you're looking for?

Sensor Type
sCMOS
Sensor Size
1/3"
Imaging Area
6.09mm (Diagonal)
Capture Resolution Info
1.2MP
Live display mode through USB (pixels)
1280x960, 640x480
All 23 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 23

Brands
Motic
New/Used
Used
Sensor Type
sCMOS
Sensor Size
1/3"
Imaging Area
6.09mm (Diagonal)
Capture Resolution Info
1.2MP
Live display mode through USB (pixels)
1280x960, 640x480
Pixel size
3.75x3.75μm
Scan mode
Progressive
Shutter mode
Rolling Shutter
Data transfer
USB 3.1
Max. frames per second (fps*)
1280x960 @ 120fps, 640x480 @ 240fps
Exposure time
15 μsec to 2 sec
Operating temperature
From -10 to +60 Degrees Celsius non condensing
Sensitivity
2350mV(G) @ 1/30 sec
Support device
TWAIN, SDK and DirectShow Driver
Supported OS
Microsoft Windows 7/8/10, MAC OSX, Linux or higher
Minimum computer requirements
2GHz dualcore - RAM memory 2GB - Video memory min. 512 MB
Lens mount
C-Mount
Software
Motic Images Plus 3.0 for Windows, OSX and Linux
Functions
Still image and video capture, live and still image measurement, image adjustments, white balance, automatic & manual exposure, individual objective calibration system
Power supply
5V (from USB Port)
Package includes
CS ring adaptor, USB 3.1 cable, Motic 4-dot calibration slide, Motic Images Plus 3.0 for Windows/OSX/Linux

Product description

5MP sCMOS microscope camera with 2/3" sensor, global shutter, USB 3.1, 37.5 fps max, C-mount lens interface.

The Motic MOTICAM PRO S5 Lite is a digital microscope camera optimized for documentation of large biological and medical samples with enhanced low-light sensitivity. Its global shutter sensor enables accurate capture of moving or fast biological phenomena.

  • Sensor Type: sCMOS, 2/3" sensor size
  • Imaging Area: 11.1 mm diagonal
  • Resolution: 5 Megapixels (2448 x 2048 pixels max)
  • Pixel Size: 3.45 x 3.45 μm
  • Shutter Mode: Global Shutter for minimized motion artifacts
  • Data Transfer: USB 3.1 interface for high-speed data transmission
  • Max Frame Rate: Up to 37.5 fps at full resolution (2448x2048), 88.4 fps at 1224x1024 pixels
  • Exposure Time Range: 14 μsec to 2 seconds
  • Operating Temperature: -10 to +60 °C (non-condensing)
  • Sensitivity: 1146 mV(G) at 1/30 sec exposure
  • Lens Mount: Standard C-Mount compatible with a wide range of microscope objectives
  • Software Compatibility: Comes with Motic Images Plus 3.0 software (Windows, OSX, Linux) supporting image capture, measurement, calibration, and image adjustments
  • Device Support: Supports TWAIN, SDK, and DirectShow drivers for integration into imaging workflows
  • Power: Powered directly via USB 3.1 port (5 V)
  • Package Includes: CS ring adapter, USB 3.1 cable, 4-dot calibration slide, and software package

This professional-grade camera is well-suited for biological, medical, and industrial microscopy applications requiring precise image capture of large, dynamic specimens under various lighting conditions.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 16 November 2026