Benchmark IPD1196-40 96 well plate, prefilled with 4mm beads, pack of 10

Thermo Scientific Compact LidPark P00155 This item was removed from a university where it was surplu (more)s to requirement. It is in very good cosmetic condition and powers up, we are unable to test it further at our facility. Model: LidPark P00155

Lancer Ultima 1400 LX Labware Washer Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, but displays a 'Service warning.' It is overdue a service. The front right side leaks, likely due to a damaged door seal. It requires full service to address the warning and leak before use. Therefore, this unit is listed as Spares/Repair.

Benchmark A1705 Agarose LE, 500gBenchmark Agarose LE is a highly purified agarose, suitable for a va (more)riety of molecular biology applications. It is refined using an advanced process that excludes the use of organic solvents, yielding a cleaner end-product with a significantly reduced environmental impact. Agarose LE can be used for analyses of nucleic acids and proteins of various sizes (150 bp to 25 kbp).Its low EEO (≤ 0.13-mr ) promotes increased electrophoretic mobility, yielding improved resolution and shorter run times. This also allows macromolecules and larger particles (subcellular fragments, viruses, etc.) to migrate more freely through the gel matrix. The consistently low EEO also provides a reduction in band distortion (caused by counter flow) that can result from the presence of excessive sulfate-rich negative ions. Agarose LE is widely used for nucleic acid electrophoresis (analytical and preparative), protein electrophoresis (including radial immunodiffusion) and various blotting protocols. It is easily soluble, free of nucleases, and easy to use. It is highly transparent (forms a clear, colorless solution at 1g:100ml H2O), and exhibits exceptionally low absorption of chemical staining agents. Pore size can be adjusted by simple modifications to the concentration ratio.Formulated for high gel strength and integrity, Agarose LE exhibits exceptional thermal stability and mechanical resistance, ensuring safe, easy handling, regardless of whether a denaturing agent has been added. Available in 25g, 100g and 500g quantities.INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Benchmark A1705 Agarose LE, 500g - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition with minor marks

Olympus BH-2 Microscope With Power Supply and Camera This was removed from a university lab where i (more)t was surplus to requirements. The unit powers on and is in good working order, however we were unable to test the camera. It is in good cosmetic condition with minor marks. Model- BH-2S/N- 1K0501 Olympus power supply includedModel- BH2-RFL-T3S/N- 08077 Microfire Camera includedS/N- AE623980-H Olympus 100W lamp Item includes the following: 2 x Olympus WHK 10x/20 Eyepiece Olympus SPlan 100PL 1.25 oil 160/0.17Serial#: 802664 Olympus SPlan 20PL 0.46 160/0.17Serial#: 805913 Olympus SPlan 40PL 0.70 160/0.17Serial#: 809756 Olympus SPlan 10PL 0.30 160/0.17Serial#: 814305

Thermo Scientific Cytomat 2C-LIN Automated CO2 Incubator This item was removed from a university lab (more) where it was surplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It is in good cosmetic condition, with minor marks from use. Also Included: 2 x plate racks with 21 shallow plate spaces each.Length of CO2 hose1 x instruction manual1 x software documentation manual1 x 2 C-LIN configuration CD2 x keys for door lock2 x keys for the power switch

Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~60 min. Internal Capacity 3.75L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 3.75L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Samples and applications - Homogenization of foods (smoothies, homogenized foods, drinks) and prepar (more)ation of stuffings for food (e.g., meat, vegetables) - Homogenization/crushing of tablets - Homogenization of tobacco leaves - Preparation of ceramics and ceramic paste - Processing of textile fibers TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-10 µm - Ultimate fineness, suspensions: 15-50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW