58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert UF75plus Forced Circulation Oven 74L, 115V

NewMemmertFurnacesUnited States

€3,803.83excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +300°C
Working Temperature Range
Min 10°C above ambient up to +300°C
Volume
74 L (2.61 cu. ft.)
Setting Resolution (temperature)
0.1°C up to 99.9°C, 0.5°C from 100°C, and for actual values 0.1°C (LED)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
All 28 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 28

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +300°C
Working Temperature Range
Min 10°C above ambient up to +300°C
Volume
74 L (2.61 cu. ft.)
Setting Resolution (temperature)
0.1°C up to 99.9°C, 0.5°C from 100°C, and for actual values 0.1°C (LED)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Control Panel
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
The process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Fan
Forced air circulation by quiet air turbine, adjustable in 10% steps for each segment individually
Fresh Air Admixture
Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control
Overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY
Integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature
Door
Fully insulated stainless steel door with 2-point locking (compression door lock)
Works Calibration Certificate
Includes works calibration certificate for +160°C
Interior
Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves
6
Max. Loading of Chamber
264 lbs
Max. Loading Per Shelf
44 lbs
Interior Dimensions (WxHxD)
15.8” x 22” x 13” (40.1 x 55.9 x 33 cm)
Exterior Dimensions (WxHxD)
23” x 37.3” x 20.2” (58.4 x 94.7 x 51.3 cm)
Net Weight
Approx. 146 lbs
Electrical Data
115 V, 50/60 Hz, approx. 1800 W

Product description

High-performance oven, 10°C-300°C range, 74L, TwinDISPLAY, AutoSAFETY, AtmoCONTROL software included.

Memmert UF75plus Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambient up to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features

  • Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display
  • Volume of 74 L (2.61 cu.ft.), offering ample space for various applications
  • TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays
  • Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB
  • Function SetpointWAIT ensures processing only begins once the target temperature is reached
  • AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port
  • AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations
  • Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability

The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity.

The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing.

INCLUDED: TheMemmert UF75plus Forced Circulation Oven 74L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 22 October 2026