58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V

NewMemmertFurnacesUnited States

€14,926.68excl. VAT

In stock

Can't find what you're looking for?

Volume
256L (9.04 Cu. Ft.)
Working Temperature Range
At least 10°C above ambient to +250°C
Setting Temperature Range
+20 to +250°C
Setting Resolution (Temperature)
Up to 99.9°C: 0.1°C / From 100°C: 0.5°C
Display Resolution (Actual Values)
0.1°C
All 31 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 31

Brands
Memmert
New/Used
New
Volume
256L (9.04 Cu. Ft.)
Working Temperature Range
At least 10°C above ambient to +250°C
Setting Temperature Range
+20 to +250°C
Setting Resolution (Temperature)
Up to 99.9°C: 0.1°C / From 100°C: 0.5°C
Display Resolution (Actual Values)
0.1°C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring
Control Panel
ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE
Adjusts heating performance distribution between the upper and lower heating circuits from -50% to +50%
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Fan
Forced air circulation by quiet air turbine, adjustable in 10% steps for each segment individually
Fresh Air
Pre-heated fresh air admixture via electronically adjustable air flap
Vent
Vent connection with restrictor flap
Programming
AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control
Independently working, digitally adjustable electronic microprocessor overtemperature monitor TWW, protection class 3.1
Temperature Control (TB)
Mechanical temperature limiter TB, protection class 1 according to DIN 12880, switches off heating 20°C above nominal temperature
AutoSAFETY
Integrated over- and undertemperature protection "ASF", heating switched off in case of overtemperature
Autodiagnostic System
For fault analysis
Alarm
Visual and acoustic
Door
Fully insulated stainless steel doors on two sides
Interior
Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves
9
Max. Loading Per Shelf
44 lbs
Max. Loading of Chamber
661 lbs
Internal Dimensions (W x H x D)
25.2" x 31.5" x 19.7" (64 x 80 x 50 cm)
External Dimensions (W x H x D)
32.5" x 51.7" x 26.9" (82.5 x 131.4 x 68.2 cm)
Net Weight
Approx. 305 lbs
Electrical Load
115 V, 50/60 Hz, approx. 1800 W

Product description

Precision temperature control and advanced safety features for demanding lab applications.

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V

Working Temperature Range At least 10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.)

Features

  • Working temperature range from at least 10°C above ambient to +250°C
  • Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior
  • TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays
  • Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture
  • AutoSAFETY system with integrated over- and undertemperature protection
  • Supports up to 9 shelves with a maximum chamber load of 661 lbs
  • Three freely selectable temperature calibration points
  • Function SetpointWAIT ensures process begins only once set temperature is reached

The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability.

This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment.

INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes:

  • 2 Stainless Steel Grid
  • Tilt Protection Wall Bracket
  • Base Cladding with Screw Connection
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026