58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert UF30 Forced Circulation Oven 32L, 115V

NewMemmertFurnacesUnited States

€1,971.97excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +300°C
Working Temperature Range
Min. 10°C above ambient up to +300°C
Volume
32 L (1.13 cu.ft.)
Setting Resolution (temperature)
0.1°C up to 99.9°C, 0.5°C from 100°C and actual values 0.1°C (LED)
Temperature Sensor
1 Pt100 sensor DIN class A in 4-wire-circuit
All 27 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 27

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +300°C
Working Temperature Range
Min. 10°C above ambient up to +300°C
Volume
32 L (1.13 cu.ft.)
Setting Resolution (temperature)
0.1°C up to 99.9°C, 0.5°C from 100°C and actual values 0.1°C (LED)
Temperature Sensor
1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel
ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
The process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, program time, time zones, daylight savings time
Fan
Forced air circulation by quiet air turbine, adjustable in 10 % steps
Fresh Air
Adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software on a USB stick for programming, managing, and transferring programs via Ethernet interface or USB port
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Door
Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Works Calibration Certificate
Includes works calibration certificate for +160°C
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
3
Max. Loading of Chamber
132 lbs
Max. Loading per Shelf
44 lbs
Interior Dimensions (WxHxD)
15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD)
23” x 27.8” x 17.1” (58.4 x 70.5 x 43.4 cm)
Net Weight
Approx. 100 lbs
Electrical Data
115 V, 50/60 Hz, approx. 1600 W

Product description

Precision oven for diverse lab applications with 32L capacity and advanced digital controls.

Memmert UF30 Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambient up to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features

  • Internal volume of 32 L (1.13 cu.ft.) for flexible applications
  • Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C
  • Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
  • Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture
  • Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety
  • Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides
  • AtmoCONTROL software for managing and transferring data via USB or Ethernet interface
  • Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days
  • Fully insulated stainless steel doors with 2-point locking and inner glass doors

The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved.

Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks.

INCLUDED: TheMemmert UF30 Forced Circulation Oven 32L, 115V includes:

  • 1 Stainless Steel Grid
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026