Polyscience WBE28A11B 28L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience WBE28A11B 28L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the  (more)Polyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE28A11B 28L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE28A11B 28L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature Range: Ambient to 100°C Temperature Stability: ±0.1°C Temperature Uniformity: ±0.2°C Tem (more)perature Presets: 4 Capacity: 5 L Chamber Material: Stainless Steel Controller Type: Digital Heating Capacity: 300 W Includes Clear Polycarbonate Gable Cover Dimensions (LxWxH): 246 x 355 x 232 mm

Temperature range: -15ºC to 100ºC Dimensions (WxDxH): 230 x 405 x 580 mm Internal dimensions (WxDxH) (more): 150 x 130 x 160 mm

VACUUBRAND ME 4 NT Diaphragm Pump Ultimate Vacuum 70 mbar (52 Torr) Maximum Pumping Speed 2.6 CFM a (more)t 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - ME 4 NT with low vibration and higher pumping speed - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. All parts in contact with pumped media are made of aluminum and selected plastics, allowing a wide range of applications for non-corrosive gases. The one-stage construction provides the advantageous combination of high pumping speed and an ultimate vacuum down to 70 mbar. The highly flexible fabric-reinforced double diaphragm made of FKM is ideal for extended operating life. The NT-series features further improved performance data. One-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping at modest vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are vacuum ovens, aqueous filtrations and pumping and evacuation of non-aggressive gases in general. The ME 4 NT offers shorter evacuation times and higher gas throughput.INCLUDED: The VACUUBRAND ME 4 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 9 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

Polyscience AP17P100-A11B 17L Polycarbonate Open Bath, Advanced Programmable (Ambient +10 to 85C), 1 (more)20V, 60HzThe Polyscience AP17P100-A11B 17L Polycarbonate Open Bath, is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications. Features - Open-mode time/temperature programming (no restrictions on number of programs or steps) - Intuitive 4.3” (10.9 cm) SmartTouch display - 11 languages: French, German, Spanish, Chinese, Portuguese, Russian, Hindi, Arabic, Italian, Korean, English - Variable speed pump with open- and closed-loop external circulation capability - Swivel 180™ Rotating Controller - On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 remote on/off and external temperature probe - Event scheduling (time & date) with real-time clock - Review temperature trends for up to 10 days - Multiple selectable “home” screens - On-screen help Click Here to View Product Video INCLUDED: The Polyscience AP17P100-A11B 17L Polycarbonate Open Bath, Advanced Programmable (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic BA410E Binocular Sextuple Compound Microscope - Pathology Package Magnification Range 2x to 40 (more)x Optical System Colour Corrected Infinity (CCIS) Illumination 12V/50W Halogen Features - Flagship model with highest level of optical performance - Maximum clarity in colour and resolution - Expanded resolution power for more detailed specimen evaluation - Light intensity adjustment with memory for each objective position - Rackless stage allows safe and fast throughput of slides - Coaxial coarse and fine focusing system with tension adjustment - Fine focus precision of 1 μm - Auto ON-OFF illumination function via built-in IR-sensor - Focusable and centerable swing-out Abbe condenser - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The BA410 Elite is Motic’s brand new approach for a professional research microscope with best image quality options. This version of the Motic BA410E is a binocular sextuple microscope with CCIS Plan Achromat objectives EC-H PL2X, EC-H PL4X, EC-H PL10X, EC-H PL20X, EC-H PL40X S for pathology research. Universities and laboratories with applications in hematology, cytology, and histology will benefit from this flexible microscope platform with a superb performance in optics and mechanics. Following Motic’s CCIS Infinity concept, the new Plan Apochromatic objectives may be chosen to get maximum image fidelity. Expanded resolution power in terms of numerical aperture and stunning color reproduction allows a reliable sample evaluation in all biomedical environments. The established EC-H Plan Achromatic bright field objectives are an integral part of the standard configurations, while Phase contrast is feasible with positive and negative Phase lenses.The BA410E stand carries an encoded 6-fold nosepiece that memorizes the light intensity setting for each objective position. This light memory function replicates the last setting once the respective objective position is swung in again. The rackless stage without a prominent gear rack allows a safe and fast throughput of slides. A ceramic stage insertion withstands abrasion for a long lifetime. INCLUDED: The Motic BA410E Binocular Sextuple Compound Microscope - Pathology Package includes: - Ergonomic Binocular 4° to 30° tilting head Siedentopf type - Widefield high eyepoint eyepiece WFPL 10X / 22mm with diopter adjustment - Reversed Sextuple nosepiece - CCIS Plan Achromat objectives EC-H PL2X, EC-H PL4X, EC-H PL10X, EC-H PL20X, EC-H PL40X S - Built in low position rackless stage with right hand control - Achromat swing-out condenser N.A. 0.90 with iris diaphragm - Simple add on Polarizer - Analyzer slider with rotating mount (360° rotatable) - Lambda/First Order Red Compensator" - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Koehler illumination quartz halogen 12V/50W with external lamp house and intensity control - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty