Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
✉️ info@questpair.com
Yamato INE-800-220V Refrigerated Forced Convection Programmable Incubator
Product Description
Operation and Functions:
- Upgraded inverter control for enhanced refrigeration efficiency and reduced frost
- 44% power savings compared to earlier models
- Improved temperature distribution accuracy with PID microprocessor control
- Program operation: auto-start/stop, quick auto stop, timer, calibration offset, memory functions
- Electricity and CO₂ emission monitoring included
Technical Specifications:
- System: Forced convection
- Operating Temp. Range: 0 to +60°C
- Set Temp. Range: -5 to +65°C
- Temp. Adjustment Accuracy: ±0.2°C (37°C continuous), ±0.5°C (37°C cycle)
- Temp. Fluctuation: ±0.3°C (37°C continuous), ±1.0°C (37°C cycle)
- Temp. Distribution Accuracy: ±0.5°C (37°C continuous)
- Temperature Gradient: 2.0°C (37°C continuous)
- Max Temperature Reaching Time: 20→60°C in 35 min
- Min Temperature Reaching Time: 20→0°C in 50 min
- Cooling Mechanism: Continuous, cycle, and cooling-stop operation modes
- Interior: Stainless steel
- Exterior: Chromate-free electrogalvanized steel with chemical-resistant baked finish
- Heat Insulator: Styrene foam (non-freon)
- Freezer Unit: 200W rotary compressor, R134a refrigerant (350g)
- Freezer Operating Range: Below 40°C ambient temperature
- Defrosting: Hot gas bypass method with manual and automatic (timed) defrost options
- Blower Fan: DC axial flow fan, 4-step speed, error signal on fan stop
- Heater: Iron-chrome wire, 750W
- Sensors: Dual sensors - Pt100Ω platinum resistance (control), K-thermocouple (overheat protection)
- Cable Port: 50 mm diameter on right side
- Temperature Controller: PID microprocessor-based
- Display:
- Set Temp: 5-digit orange LED
- Actual Temp: 4-digit green LED
- Timer: 0 to 99hr 59min, 1 min resolution
- Operation Modes: Fixed temp, auto start/stop, quick auto stop, program mode (99 steps, 99 patterns)
- Additional Functions: Timer, calibration offset, electricity and CO₂ emission monitor, optional voltage recovery, user setting save/readout, 24-hour calendar timer
- Safety Features:
- Self-diagnostic (sensor error, heater disconnection, SSR short, relay error)
- Key lock, overcurrent and leakage breaker, overheat prevention, fan malfunction detector
- Cooling high pressure and inverter malfunction detectors
- Dimensions:
- External WxDxH: 710 x 645 x 1730 mm
- Internal WxDxH: 600 x 477 x 1000 mm (effective 800 mm)
- Capacity: 286 liters
- Shelf Load Capacity: 15 kg per shelf
- Shelf Steps & Pitch: 23 steps with 30 mm pitch
- Power Supply: AC115V 8.7A (with plug), AC220V 4.5A (no plug, round terminal)
- Weight: Approximately 135 kg
- Included Accessories:
- 5 stainless steel punched metal shelves
- 10 brackets
- 2 keys
- 1 silicon stopper for cable hole
Item Stats
Product details
| System | Forced convection |
| Operating Temperature Range | 0~+60°C |
| Setting Temperature Range | -5~+65°C |
| Temperature Adjustment Accuracy | ±0.2°C (at 37°C during continuous operation), ±0.5°C (at 37°C cycle operation) |
| Temperature Fluctuation | ±0.3°C (at 37°C during continuous operation), ±1.0°C (at 37°C cycle operation) |
| Temp. Distribution Accuracy | ±0.5°C (at 37°C during continuous operation) |
| Temperature Gradient | 2.0°C (at 37°C during continuous operation) |
| Max. Temperature Reaching Time | 20~60°C 35min. |
| Min. Temperature Reaching Time | 20~0°C 50min. |
| Cooling Mechanism | Continuous operation, Cycle operation, Cooling-stop operation |
| Interior | Stainless steel |
| Exterior | Chromate-free electrogalvanized steel plate Baked chemical resistant finish |
| Heat Insulator | Styrene foam (non-freon) |
| Freezer | 200W Rotary Unit |
| Cooling Medium | R134a 350g |
| Operation Range Of Freezer | Below 40°C |
| Defrosting Mechanism | Hot Gas Bypass Method, Manual (random) Defrost / Auto (time) Defrost |
| Blower Fan | DC Axial flow fan 4-Step, Equipped with Error Signal when stopped |
| Heater | Iron-chrome wire heater : 750W |
| Sensor | Double sensor: Platinum resistance temperature detector: Pt100Ω (temperature controller), K-thermocouple (overheat prevention device) |
| Cable Port | I.D.: 50 mm (right side of main unit) |
| Temperature Controller | PID control by microprocesser |
| Temperature Display | Setting Temp. Display : 5-digit orange LED digital display / Actual Temp. Display : 4-digit green LED digital display |
| Timer / Timer Resolution | 0~99hr. 59min. / 1min. |
| Operation Function | Fixed temperature, Auto start, Auto stop, Quick auto stop, Program (99 steps, 99 patterns) |
| Additional Functions | Timer, Calibration off-set, Electricity & CO₂ Emission Monitor, Voltage Recovery Optional, User Setting saving/readout, Calendar timer (24 hours) |
| Safety Device | Self diagnostic function (temp. sensor error, heater disconnection, SSR short-circuit, main relay error, automatic overheat prevention), Key lock, Overcurrent electric leakage breaker, Overheat prevention device, Fan malfunction detector, Cooling high-pressure detector, Inverter malfunction detector |
| External Dimensions WxDxH | 710 x 645 x 1730 mm |
| Internal Dimensions WxDxH | 600 x 477 x 1000 (effective 800) mm |
| Internal Capacity | 286L |
| Shelf Load Capacity | 15 kg/pc. |
| Shelf Rest Step Number / Pitch | 23 steps / 30mm |
| Power Supply (50/60 Hz) | AC115V 8.7A (with plug)AC220V 4.5A (no plug, round terminal) |
| Weight | ~135kg |
| Included Accessories | Stainless steel punched metal 5 pcs. shelf / 10 pcs. brackets, 2 keys, silicon stopper for cable hole 1 pc |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €9,704.60*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.