51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Panasonic MCO-80IC CytoGrow Reach-In Large Capacity CO2 Incubator for Cell Culture

Price on request

In stock

Can't find what you're looking for?

Temperature
Ambient Temperature +5ºc To +50ºc
Temperature Uniformity
±0.50ºc (Ambient Temperature: 25ºc, Setting: 37ºc, Co2: 5 %, No Load)
Volume
30 Cu Ft / 851 L
Air Filter
0.3μm, Efficiency; 99.97% Or More
Access Ports
2: Right And Left Sides (1.6″ (40 Mm) Diameter)
All 16 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 16

Brands
PHCbi
New/Used
Used
Temperature
Ambient Temperature +5ºc To +50ºc
Temperature Uniformity
±0.50ºc (Ambient Temperature: 25ºc, Setting: 37ºc, Co2: 5 %, No Load)
Volume
30 Cu Ft / 851 L
Air Filter
0.3μm, Efficiency; 99.97% Or More
Access Ports
2: Right And Left Sides (1.6″ (40 Mm) Diameter)
Co2 Control Range
0% To 20%
CO2 Inlet Connection
4 To 6 Mm Diameter Tube
CO2 Inlet Pressure
0.1 Mpag (1.0 Kgf/Cm2
CO2 sensor
IR
Humidifying System
Normal Mode Over 80 (High Mode Over 90)
Interior Dimensions
31X26X59″
Exterior Dimensions
39X38X78″
Weight
400 Lbs
Power
110-120V, 60Hz, 16.0A, 1840W

Product description

Large 851 L Panasonic CytoGrow CO2 incubator with precise IR sensor control, uniform airflow, and contamination resistance.

The Panasonic MCO-80IC CytoGrow Reach-In CO2 Incubator offers a large 851-liter (30 cu ft) capacity with precise microprocessor control of CO2 and temperature, ideal for high-volume cell culture applications in molecular diagnostics, biotechnology, and bioprocessing. The incubator utilizes an infrared (IR) CO2 sensor ensuring rapid and accurate CO2 recovery without overshoot, supporting concentrations from 0% to 20%.

Key features include:

  • Temperature range: Ambient +5°C to +50°C with ±0.50°C uniformity at 37°C (5% CO2, no load) for stable cell culture environments.
  • Horizontal airflow design enhances temperature and CO2 uniformity across shelves, optimizing large-volume cell growth and supporting consistent conditions critical in synthetic biology and biomanufacturing.
  • Incusafe copper-enriched stainless steel lining provides passive germicidal contamination control without maintenance, reducing corrosion and preserving sterility over extended culturing periods.
  • Humidity control operates in two modes: standard (>80%) and elevated humidity (>90%), essential for sustaining optimal cell viability in biotechnology workflows.
  • Two 40 mm diameter access ports and internal electrical outlets facilitate integration of additional monitoring or experimental tools used in molecular cloning and live-cell imaging studies.
  • A digital microprocessor display panel mounted above the door reports real-time CO2, temperature, and alarm statuses (High/Low temperature, CO2 density, upper temp limit), with optional remote alarm contacts for laboratory safety.

Constructed with durable polyurethane insulation and a heated double glass outer door, the incubator minimizes temperature fluctuations and heat loss, supporting critical biomedical engineering and clinical diagnostics research demands. This upright incubator’s robust performance and extensive features make it widely adopted in synthetic biology research and critical in biopharmaceutical production pipelines requiring stringent environmental control and scalability.

The MCO-80IC is powered by 110-120V, 60Hz, consuming 1840W, and weighs approximately 400 lbs, suitable for standard laboratory infrastructure setups. Its 0.3 μm HEPA air filter achieves ≥99.97% efficiency, ensuring contamination-free atmospheres vital for advanced cell culturing and gene editing protocols.

This large capacity reach-in CO2 incubator is essential for researchers seeking reliable equipment for uniform cell culture incubation, bioprocessing applications, and molecular biology studies requiring tightly controlled environmental parameters.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 17 November 2026