Jenway 7315 Spectrophotometer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Camspec M501 Single Beam Scanning UV-VIS Spectrophotometer This item was removed from a university l (more)aboratory where it was surplus to requirements. The spectrophotometer powers on, completes a self-test after a 15-minute warm-up, and displays a battery replacement message. The main menu is accessible, and the internal lamps are illuminated. No further testing was conducted. Includes: - 1 x printer cable - 1 x spare sample holder for the internal analysis chamber Serial No.: SSH0603030

This VWR V-3000PC Visible Spectrophotometer was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and starts a 15 min preheat. After this, it asks if it was to be calibrated or not. We have not tested it further. It is in good cosmetic condition with marks from use.

Jenway 7315 Spectrophotometer This item was removed from a university where it was surplus to requir (more)ement. This item is in good cosmetic condition and powered on, however, the item was displaying error 8 (see below): Therefore we are unable to test further. "Err 8 Warning: Redo Unable to find Vane on Turret This error indicates that the vane position zero on the turret cannot be found. The most likely causes for this error are: 1. The turret carousel has been removed and not replaced. Solution: Check if the turret is in the sample chamber and inserted properly. Press the key adjacent to the back icon to try rechecking." It is sold for spares/repairs

Cecil CE 3041 3000 Series Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit passed a service in August 2023. The item also includes the following: X100 FisherBrand Cuvette Macro 4.0ml, PS UV

MARSHALL Select MS-SP320-1100 Spectrophotometer, 320-1,100nm Wavelength Range 320 to 1,100nm Wavelen (more)gth Accuracy ± 0.5nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Features a large backlit screen providing detailed graphical data presentation - Equipped to store up to 200 test results and standard curves - Simplifies setup with arrow keys for error-free wavelength adjustment - Accommodates a variety of cuvette sizes, supporting path lengths from 5 to 100mm - Designed to withstand the rigorous demands of daily use - Built-in USB port for efficient data exports Introducing the MARSHALL Select MS-SP320-1100 Spectrophotometer, a state-of-the-art instrument designed for precision and adaptability across a broad spectrum of scientific applications including agriculture, geology, metallurgy, and environmental studies. This robust spectrophotometer is equipped with a single-beam optical system and a high-class grating of 1200 lines/mm, ensuring a spectral bandwidth of 4 nm and a comprehensive wavelength range from 320 to 1100 nm. The MS-SP320-1100 sets itself apart with advanced features such as an imported, environmentally-friendly lamp system that minimizes ozone exposure and enhances user safety. It offers automatic functionalities including wavelength calibration, light source switching, and dark current calibration, which streamline operations and reduce potential errors. The optical mirror is coated with SiO2 to diminish interference from external light sources, thereby improving the accuracy and reliability of measurements. The spectrophotometer’s LCD display provides easy navigation and real-time monitoring of lamp life and system stability, ensuring consistent performance. With its superior design and innovative features, the MARSHALL Select MS-SP320-1100 is an indispensable tool for professionals seeking to push the boundaries of research and analysis. INCLUDED: The MARSHALL Select MS-SP320-1100 Spectrophotometer, 320-1,100nm includes: - Tungsten Lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requir (more)ements. The cosmetic condition of this item is fairly good and it has powered on. We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed. We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too. For this reason, It is sold for spare/repairs The speed range is from 15000 to 40000 rpm. Additionally included: 1x New Brunswick Scientific power supply switching/speed selection unit 1x Huber and Moser motor

The automatic feeder is dedicated for automatic dispensing of small objects onto the weighing pan of (more) RADWAG-manufactured balance to which it is connected. The feeder ensures regular feeding of the elements in accordance with determined time intervals. Operation and Compatibility The PA-04/H feeder cooperates with XA 4Y and AS 3Y analytical balances and PS 3Y precision balances. Both the feeder and the balance are automated devices. The balance carries out analysis of dosed elements and sends signal to the feeder to dispense subsequent element. The feeder features diodes, signalling its operation, and keypad allowing to control the process. Automatic feeder is equipped with function of automatic emptying of the storage bin. Vibrating Feeder Cylindrical vibrating feeder with storage bin enables safe and precise dosing of elements. The storage bin has a conical and stepped shape and is continuously welded. The stainless steel surface of adequate roughness reduces elements grating during dosing process. Variety of Applications The feeder is appropriate for dosing pills of diameter ranging from 3 to 25 mm, round and oblong, as well as details of similar shapes and dimensions Design The device is equipped with powder-coated steel housing and stainless steel cover. The storage bin features transparent lid that allows verifying quantity of remaining elements. Compatible with scales: All analytycal XA 5Y.A All analytycal XA 5Y Microbalances: - XA 21.5Y.M.A - XA 21/52.5Y.M.A - XA 52.5Y.M.A - XA 53.5Y.M.A Microbalances: - XA 21.5Y.M - XA 21/52.5Y.M - XA 52.5Y.M - XA 53.5Y.M Note! To make the feeder work, simply buy the PT0453 cable, which is not part of the set.

Hermle Z32-HK Refrigerated CentrifugeFeatures - Brushless induction drive - Microprocessor control - (more) Active imbalance detection and cut-off - Motor driven lid lock - Automatic rotor identifi cation system with over speed protection - Audible signal at the end of each run - Emergency lid lock - Stainless steel chamber - CFC-free refrigeration system (-20° to +40C) - Autoclavable rotors - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - Pre-cooling program - Standstill cooling - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10 increments - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed operation Interested in rotors and/or adapters for this centrifuge?Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z32-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 The Eppendorf Plat (more)e Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are designed for use with the Eppendorf S-4-104 Swing Bucket Rotor. These plate buckets feature an aerosol-tight capable cap design (aerosol-tight caps not included), ensuring that samples remain safe and secure during centrifugation. With a maximum capacity of 4 microplates per bucket, 2 cell culture plates per bucket, or 1 deepwell plate per bucket, these plate buckets are ideal for a wide range of applications, including cell culture, protein purification, and nucleic acid isolation. The plate buckets' maximum speed of 3,900 RPM and maximum RCF of 2,568 x g make them capable of high-speed separations, while their 15.1 cm maximum radius ensures efficient sample processing. Overall, the Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are a valuable accessory for researchers and scientists who require efficient, safe, and reliable plate buckets for use within the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity4 x Microplates Per Bucket2 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius15.1 cmRotor CompatibilityEppendorf S-4-104 Swing Bucket Rotor

Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V Display 10” full co (more)lor touch screen with adjustable angle Block Temperature Range 4°C - 99.9°C Temperature Accuracy ≤ ± 0.2°C (at 90°C) Features - Dual block format - All accept 0.2 mL PCR tubes and strips, flat or dome caps - Each block functions independently - Block temperature range: 4°C - 99.9°C; Lid temperature range: 30 - 112°C - Intuitive Touch Screen Control - Large 10-inch adjustable touch screen - folds away when not in use - Program wizard for fast and easy programming - Advanced program features - Gradient capabilities - up to 8 temperatures per block Designed for laboratories wanting flexibility in their applications, Benchmark’s MultiCycler™ Thermal Cyclers offer multiple, independent cycling blocks in a single unit. Dual or triple block models are available, both offering extremely fast cycling profiles, large touch screen interfaces, self-adjusting heated lids, gradient capabilities, and an easy-to-use program wizard. All programming features are accessed from the large, 10” full color touch screen. The screen can be angled towards the user when in use and then tucked away to save space. A program wizard guides users through the simple protocol set up process. Advanced programming features include gradient, adjustable ramp rates, and time increments and decrements. For multi-user labs, password protection prevents interference of an existing run. A USB provides for unlimited program storage and easy transfer of protocols between MultiCycler machines. The auto-adjusting heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. Peltier units allow for exceptionally fast heating and cooling of the blocks. Temperature change is precisely and accurately controlled within tight tolerances by a proprietary algorithm that simulates sample temperature, resulting in fast runs and reproducible results. The wells are arranged in a 4×8 and 6×8 format, allowing for the use of PCR strip tubes in both models. Each block is independently controlled. INCLUDED: The Benchmark MultiCycler 248, MultiBlock Thermal Cycler, 2 x 48 x 0.2ml, 115-230V includes: - Power Cord - Two Year Manufacturer's Warranty